[00:58:02]
<Yunohost Git/Infra notifications> App ampache rises from level 6 to 8 in job [#29059](https://ci-apps.yunohost.org/ci/job/29059) !
[01:45:45]
<Yunohost Git/Infra notifications> Autoupdater just ran, here are the results:
- 18 pending update PRs
- 9 new apps PRs
- 7 failed apps updates: domoticz, focalboard, plainpad, dynamicqrcode, roundcube, snserver, webtrees
See the full log here: http://paste.yunohost.org/raw/yademedera
[03:31:01]
<Yunohost Git/Infra notifications> App chitchatter goes down from level 8 to 6 in job [#29067](https://ci-apps.yunohost.org/ci/job/29067)
[07:02:54]
<Yunohost Git/Infra notifications> [my_webapp_ynh] kay0u approved [pull request #129](https://github.com/YunoHost-Apps/my_webapp_ynh/pull/129#pullrequestreview-2201084892) Testing
[07:59:44]
<thatoo> Il y a comme une petit soucis...
```
administrateur@yunohost:~ $ ls -al /var/log/yunohost/operations
ls: cannot access '/var/log/yunohost/operations': Permission denied
administrateur@yunohost:~ $ sudo ls -al /var/log/yunohost/operations
[sudo] password for administrateur:
administrateur is not in the sudoers file.
This incident has been reported to the administrator.
administrateur@yunohost:~ $ ls -al /var/log/yunohost/categories/operations/
ls: cannot access '/var/log/yunohost/categories/operations/': Permission denied
```
[08:01:12]
<thatoo> Il y a comme une petit soucis...
```
administrateur@yunohost:~ $ ls -al /var/log/yunohost/operations
ls: cannot access '/var/log/yunohost/operations': Permission denied
administrateur@yunohost:~ $ sudo ls -al /var/log/yunohost/operations
[sudo] password for administrateur:
administrateur is not in the sudoers file.
This incident has been reported to the administrator.
administrateur@yunohost:~ $ ls -al /var/log/yunohost/categories/operations/
ls: cannot access '/var/log/yunohost/categories/operations/': Permission denied
```
mais bon je suis passé en root car heureusement le mdp de root est le même que celui de l'utilisateur créé à l'installation.
[08:06:08]
<thatoo> I this command supposed to work?
`yunopaste /var/log/yunohost/categories/operation/20240725-154029-tools_migrations_migrate_forward.log`
[08:10:22]
<thatoo> I hope it helps to debug the upgrade from ynh 11 to ynh 12
[08:26:25]
<Yunohost Git/Infra notifications> [nextcloud_ynh] DansLeRuSH [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/issues/708#issuecomment-2252232426) on [issue #708](https://github.com/YunoHost-Apps/nextcloud_ynh/issues/708) After VPS transfer from Gandi to Infomaniak, restore is KO: @kay0u A very huge thank you I modify the version (but Im more team nano )) and it works well I close the issue a...
[08:26:25]
<Yunohost Git/Infra notifications> [nextcloud_ynh] DansLeRuSH closed [issue #708](https://github.com/YunoHost-Apps/nextcloud_ynh/issues/708): After VPS transfer from Gandi to Infomaniak, restore is KO
[08:56:45]
<thatoo> `cat /var/log/yunohost/categories/operation/20240725-154029-tools_migrations_migrate_forward.log | yunopaste` me donne les logs suivants pour la migration ynh 11 vers ynh 12 : https://paste.yunohost.org/raw/okocoweyar
[08:57:28]
<thatoo> En espérant que ces logs soient utiles pour améliorer la maj ynh 11 vers 12
[08:58:20]
<thatoo> Petite question subsidiaire : est-ce qu'il m'est possible de terminer la migration ou bien je ferais mieux de faire une réinstall depuis debian 12?
[09:10:30]
<thatoo> > <@thatoo:defis.info> Petite question subsidiaire : est-ce qu'il m'est possible de terminer la migration ou bien je ferais mieux de faire une réinstall depuis debian 12?
En fait, je suis disponible jusqu'à midi pour faire des tests et du debbugage si besoin et si ça aide. Cet après-midi je vais refaire une reinstall pour être sûr de pouvoir tester l'install Dokos avant de partir en vacance.
[09:39:12]
<Mateusz Szymański> no bot picks up `!testme` these days?
[09:41:21]
<Salamandar> it was fixed 2 days ago D:
[09:41:29]
<Salamandar> where do you still see an issue ?
[09:58:18]
<orhtej2> > <@Salamandar:matrix.org> where do you still see an issue ?
https://github.com/YunoHost-Apps/penpot_ynh/pull/52
[10:05:34]
<Salamandar> Lol we have a problem it only works with me
[10:07:34]
<thatoo> > <@thatoo:defis.info> En fait, je suis disponible jusqu'à midi pour faire des tests et du debbugage si besoin et si ça aide. Cet après-midi je vais refaire une reinstall pour être sûr de pouvoir tester l'install Dokos avant de partir en vacance.
Bon, en fait, j'ai simplement relancé la commande `yunohost tools migrations run --accept-disclaimer --debug` et la migration m'a indiqué avoir été un succès.
https://paste.yunohost.org/raw/osehexoyej
[10:09:14]
<thatoo> mais si je vais sur la webadmin, j'ai l'erreur suivante
[10:09:30]
<thatoo> > YunoHost a rencontré une erreur interne
> Vraiment désolé de cela.
> Vous devez chercher de l'aide sur le forum ou le chat pour corriger la situation, ou signaler le bug sur le bugtracker.
> Les informations suivantes peuvent être utiles à la personne qui vous aide :
>
> Erreur: "500"
>
> Action: "GET" /yunohost/api/versions?locale=fr
>
> Message d'erreur :
>
>
>
>
>
>
>
>
> Error: 500 Internal Server Error
>
> Sorry, the requested URL 'http://yunohost.accolades.coop/versions?locale=fr'
> caused an error:
[10:09:50]
<thatoo> Impossible de m'identifier.
[10:10:33]
<thatoo> est-ce que je tente un reboot?
[11:07:53]
<Yunohost Git/Infra notifications> [nextcloud_ynh] ericgaspar pushed 6 commits to v2_PostgreSQL ([0742c9903d76...0380b1fe09fe](https://github.com/YunoHost-Apps/nextcloud_ynh/compare/0742c9903d76...0380b1fe09fe))
[11:07:59]
<Yunohost Git/Infra notifications> [nextcloud_ynh/v2_PostgreSQL] oupsie - Kayou
[11:08:21]
<Yunohost Git/Infra notifications> [nextcloud_ynh] ericgaspar [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2252529333) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: testme
[11:08:25]
<Yunohost Git/Infra notifications> [nextcloud_ynh] yunohost-bot [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2252529425) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: :v:
[[Test Badge](https://img.shields.io/endpoint?url=https://ci-apps-dev.yunohost.org/ci/api/job/17914/badge)](https:/...
[11:08:26]
<Yunohost Git/Infra notifications> [nextcloud_ynh] yunohost-bot [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2252529429) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: :books: :worm:
[[Test Badge](https://img.shields.io/endpoint?url=https://ci-apps-bookworm-dev.yunohost.org/ci/api/job/2...
[11:31:57]
<Salamandar> > <@thatoo:defis.info> Bon, en fait, j'ai simplement relancé la commande `yunohost tools migrations run --accept-disclaimer --debug` et la migration m'a indiqué avoir été un succès.
> https://paste.yunohost.org/raw/osehexoyej
hello il faudrait plutôt que tu ailles sur #yunohost:matrix.org pour ton problème
[12:14:09]
<kayou> > <@thatoo:defis.info> Bon, en fait, j'ai simplement relancé la commande `yunohost tools migrations run --accept-disclaimer --debug` et la migration m'a indiqué avoir été un succès.
> https://paste.yunohost.org/raw/osehexoyej
ha, mais je crois qu'il faut se mettre en unstable pour que la migration se "fasse vraiment"
[12:15:02]
<kayou> mais si la migration est terminée, tu peux toujours aller dans le fichier /etc/apt/sources.d/yunohost.list et à la fin de la ligne, tu ajoutes "testing unstable" (juste à côté de "stable")
[12:15:29]
<kayou> ensuite, `apt update` et `apt upgrade` devrait mettre à jour YunoHost
[12:19:34]
<Yunohost Git/Infra notifications> [nextcloud_ynh] kay0u [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#discussion_r1692982958) on pull request #597 V2 postgresql: I think you should revers this line
[14:41:22]
<thatoo> C'était fait comme indiqué dans le tuto qu'Aleks m'a indiqué (https://github.com/YunoHost/yunohost/pull/1911)
`apt update` OK mais `apt upgrade` a tout cassé.
```
administrateur@yunohost:~ $ sudo apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
lua-ldap lua-rex-pcre
Use 'sudo apt autoremove' to remove them.
The following packages have been kept back:
libalgorithm-diff-xs-perl libclone-perl libdbi-perl libfcgi-perl libfile-fcntllock-perl libgssapi-perl libhtml-parser-perl libhttp-message-perl liblocale-gettext-perl libnet-dns-sec-perl libnet-libidn-perl libnet-ssleay-perl
libnetaddr-ip-perl libnginx-mod-http-auth-pam libnginx-mod-http-cache-purge libnginx-mod-http-dav-ext libnginx-mod-http-echo libnginx-mod-http-fancyindex libnginx-mod-http-geoip libnginx-mod-http-geoip2
libnginx-mod-http-headers-more-filter libnginx-mod-http-image-filter libnginx-mod-http-lua libnginx-mod-http-ndk libnginx-mod-http-perl libnginx-mod-http-subs-filter libnginx-mod-http-uploadprogress libnginx-mod-http-upstream-fair
libnginx-mod-http-xslt-filter libnginx-mod-mail libnginx-mod-nchan libnginx-mod-stream libnginx-mod-stream-geoip libnginx-mod-stream-geoip2 libsocket6-perl libtext-charwidth-perl libtext-iconv-perl nginx-common nginx-extras perl
perl-base perl-openssl-defaults slapd yunohost
0 upgraded, 0 newly installed, 0 to remove and 44 not upgraded.
administrateur@yunohost:~ $ sudo apt list --upgradable
Listing... Done
libalgorithm-diff-xs-perl/stable 0.04-8+b1 arm64 [upgradable from: 0.04-6+b1]
libclone-perl/stable 0.46-1 arm64 [upgradable from: 0.45-1+b1]
libdbi-perl/stable 1.643-4 arm64 [upgradable from: 1.643-3+b1]
libfcgi-perl/stable 0.82+ds-2 arm64 [upgradable from: 0.79+ds-2]
libfile-fcntllock-perl/stable 0.22-4+b1 arm64 [upgradable from: 0.22-3+b7]
libgssapi-perl/stable 0.28-4+b1 arm64 [upgradable from: 0.28-3+b3]
libhtml-parser-perl/stable 3.81-1 arm64 [upgradable from: 3.75-1+b1]
libhttp-message-perl/stable,stable 6.44-1 all [upgradable from: 6.28-1]
liblocale-gettext-perl/stable 1.07-5 arm64 [upgradable from: 1.07-4+b1]
libnet-dns-sec-perl/stable 1.20-1+b1 arm64 [upgradable from: 1.18-1+b1]
libnet-libidn-perl/stable 0.12.ds-4+b1 arm64 [upgradable from: 0.12.ds-3+b3]
libnet-ssleay-perl/stable 1.92-2+b1 arm64 [upgradable from: 1.88-3+b1]
libnetaddr-ip-perl/stable 4.079+dfsg-2+b1 arm64 [upgradable from: 4.079+dfsg-1+b5]
libnginx-mod-http-auth-pam/stable 1:1.5.3-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-cache-purge/stable 1:2.3-4 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-dav-ext/stable 1:3.0.0-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-echo/stable 1:0.63-4 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-fancyindex/stable 1:0.5.2-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-geoip2/stable 1:3.4-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-geoip/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-headers-more-filter/stable 1:0.34-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-image-filter/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-lua/stable 1:0.10.23-1 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-ndk/stable 1:0.3.2-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-perl/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-subs-filter/stable 1:0.6.4-4 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-uploadprogress/stable 1:0.9.2-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-upstream-fair/stable 1:0.0~git20120408.a18b409-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-http-xslt-filter/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-mail/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-nchan/stable 1:1.3.6+dfsg-2 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-stream-geoip2/stable 1:3.4-3 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-stream-geoip/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libnginx-mod-stream/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
libsocket6-perl/stable 0.29-3 arm64 [upgradable from: 0.29-1+b3]
libtext-charwidth-perl/stable 0.04-11 arm64 [upgradable from: 0.04-10+b1]
libtext-iconv-perl/stable 1.7-8 arm64 [upgradable from: 1.7-7+b1]
nginx-common/stable,stable 1.22.1-9 all [upgradable from: 1.18.0-6.1+deb11u3]
nginx-extras/stable 1.22.1-9 arm64 [upgradable from: 1.18.0-6.1+deb11u3]
perl-base/stable 5.36.0-7+deb12u1 arm64 [upgradable from: 5.32.1-4+deb11u3]
perl-openssl-defaults/stable 7+b1 arm64 [upgradable from: 5]
perl/stable 5.36.0-7+deb12u1 arm64 [upgradable from: 5.32.1-4+deb11u3]
slapd/stable 2.5.13+dfsg-5 arm64 [upgradable from: 2.4.57+dfsg-3+deb11u1]
yunohost/stable,stable 12.0.0+202407251730 all [upgradable from: 11.2.23+202407251415]
```
j'ai une erreur nginx 500 et si je redémarre nginx :
```
administrateur@yunohost:~ $ sudo yunohost service restart nginx
Traceback (most recent call last):
File "/usr/lib/python3.11/logging/config.py", line 391, in resolve
self.importer(used)
ModuleNotFoundError: No module named 'moulinette.utils.log.ActionFilter'; 'moulinette.utils.log' is not a package
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/lib/python3.11/logging/config.py", line 550, in configure
filters[name] = self.configure_filter(filters[name])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/logging/config.py", line 687, in configure_filter
result = self.configure_custom(config)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/logging/config.py", line 468, in configure_custom
c = self.resolve(c)
^^^^^^^^^^^^^^^
File "/usr/lib/python3.11/logging/config.py", line 396, in resolve
raise v from e
ValueError: Cannot resolve 'moulinette.utils.log.ActionFilter': No module named 'moulinette.utils.log.ActionFilter'; 'moulinette.utils.log' is not a package
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/bin/yunohost", line 77, in <module>
yunohost.cli(
File "/usr/lib/python3/dist-packages/yunohost/__init__.py", line 35, in cli
init_logging(interface="cli", debug=debug, quiet=quiet)
File "/usr/lib/python3/dist-packages/yunohost/__init__.py", line 168, in init_logging
configure_logging(logging_configuration)
File "/usr/lib/python3/dist-packages/moulinette/utils/log.py", line 66, in configure_logging
dictConfig(logging_config)
File "/usr/lib/python3.11/logging/config.py", line 812, in dictConfig
dictConfigClass(config).configure()
File "/usr/lib/python3.11/logging/config.py", line 552, in configure
raise ValueError('Unable to configure '
ValueError: Unable to configure filter 'action'
```
[14:42:21]
<thatoo> Je suis désolé, j'espérais pouvoir aider avec cette tentative mais c'est raté.
[14:45:05]
<Aleks (he/him/il/lui)> thatoo: tu fais `sudo apt upgrade` mais il "faut" jamais faire "apt upgrade". Enfin c'est un peu un défaut de conception de apt niveau nommage des commandes etc (déjà entre update et upgrade c'est pas clair bref)
[14:45:28]
<Aleks (he/him/il/lui)> dans 99% du temps ce que tu veux faire c'est "full-upgrade" (qui est le nouveau nom de dist-upgrade, qui lui aussi était confusant)
[14:45:37]
<Aleks (he/him/il/lui)> bref: `sudo apt full-upgrade`
[14:47:02]
<thatoo> Merci pour l'explication
[14:47:21]
<thatoo> ```
administrateur@yunohost:~ $ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Error!
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
yunohost : Depends: ssowat (>= 11.1) but it is not going to be installed
Depends: nginx
Depends: nginx-extras (>= 1.18) but it is not going to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
```
[14:48:49]
<Aleks (he/him/il/lui)> classic apt is stupid as hell ~_~
[14:49:09]
<Aleks (he/him/il/lui)> `aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat`
[14:53:43]
<thatoo> Il me propose une solution qui "m'inquiète" un peu (laors pas inquiet du tout car serveur vierge, inquiet est donc une façon de parler) :
```
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} fontconfig-config{u} fonts-dejavu-core{u} galera-4{u} geoip-database{u} javascript-common{u} libabsl20220623{u} libaom3{u} libavif15{u} libcgi-fast-perl{u} libcgi-pm-perl{u}
libconfig-inifiles-perl{u} libdav1d6{u} libdaxctl1{u} libde265-0{u} libdeflate0{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u} libfontconfig1{u} libgav1-1{u} libgd3{u} libgeoip1{u}
libgraphite2-3{u} libharfbuzz0b{u} libheif1{u} libhtml-template-perl{u} libimagequant0{u} libjbig0{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblerc4{u} liblzf1{u} liblzo2-2{u} libndctl6{u}
libnginx-mod-http-auth-pam{u} libnginx-mod-http-cache-purge{u} libnginx-mod-http-dav-ext{u} libnginx-mod-http-echo{u} libnginx-mod-http-fancyindex{u} libnginx-mod-http-geoip{u} libnginx-mod-http-geoip2{u}
libnginx-mod-http-headers-more-filter{u} libnginx-mod-http-image-filter{u} libnginx-mod-http-perl{u} libnginx-mod-http-xslt-filter{u} libnginx-mod-mail{u} libnginx-mod-stream{u} libnginx-mod-stream-geoip{u}
libnginx-mod-stream-geoip2{u} libnuma1{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libraqm0{u} librav1e0{u} libsnappy1v5{u} libsvtav1enc1{u} libtiff6{u} liburing2{u} libwebp7{u} libx265-199{u} libxpm4{u}
libyuv0{u} lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
```
Qu'il veuille supprimer mariadb-server par exemple me parait étrange.
[14:54:29]
<Aleks (he/him/il/lui)> comme d'hab, on ne peut pas t'aider avec juste un morceau partiel du log ...
[14:59:16]
<thatoo> ```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libmilter1.0.1{a} (for yunohost) libperl5.36{a} nginx{ab} (for yunohost) opendkim{a} (for yunohost) perl-modules-5.36{a} python3-all{a} (for yunohost) python3-email-validator{a} (for yunohost) python3-jwt{a} (for yunohost)
python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost) python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} fontconfig-config{u} fonts-dejavu-core{u} galera-4{u} geoip-database{u} javascript-common{u} libabsl20220623{u} libaom3{u} libavif15{u} libcgi-fast-perl{u} libcgi-pm-perl{u}
libconfig-inifiles-perl{u} libdav1d6{u} libdaxctl1{u} libde265-0{u} libdeflate0{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u} libfontconfig1{u} libgav1-1{u} libgd3{u} libgeoip1{u}
libgraphite2-3{u} libharfbuzz0b{u} libheif1{u} libhtml-template-perl{u} libimagequant0{u} libjbig0{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblerc4{u} liblzf1{u} liblzo2-2{u} libndctl6{u}
libnginx-mod-http-auth-pam{u} libnginx-mod-http-cache-purge{u} libnginx-mod-http-dav-ext{u} libnginx-mod-http-echo{u} libnginx-mod-http-fancyindex{u} libnginx-mod-http-geoip{u} libnginx-mod-http-geoip2{u}
libnginx-mod-http-headers-more-filter{u} libnginx-mod-http-image-filter{u} libnginx-mod-http-perl{u} libnginx-mod-http-xslt-filter{u} libnginx-mod-mail{u} libnginx-mod-stream{u} libnginx-mod-stream-geoip{u}
libnginx-mod-stream-geoip2{u} libnuma1{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libraqm0{u} librav1e0{u} libsnappy1v5{u} libsvtav1enc1{u} libtiff6{u} liburing2{u} libwebp7{u} libx265-199{u} libxpm4{u}
libyuv0{u} lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
The following packages will be upgraded:
nginx-common (for yunohost) perl perl-base yunohost{b}
4 packages upgraded, 12 newly installed, 113 to remove and 24 not upgraded.
Need to get 11.7 MB of archives. After unpacking 253 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-http-uploadprogress : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libnginx-mod-http-lua : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libnginx-mod-http-ndk : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
nginx : Breaks: nginx-extras (< 1.22.1-6~) but 1.18.0-6.1+deb11u3 is installed and it is kept back
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
yunohost : Depends: nginx-extras (>= 1.22) but 1.18.0-6.1+deb11u3 is installed and it is kept back
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-nchan : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-http-subs-filter : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-http-upstream-fair : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
nginx-extras : Depends: libnginx-mod-http-auth-pam (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-cache-purge (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-dav-ext (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-echo (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-fancyindex (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-geoip (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-geoip2 (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-headers-more-filter (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-image-filter (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-perl (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-http-xslt-filter (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-mail (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-stream (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-stream-geoip (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: libnginx-mod-stream-geoip2 (= 1.18.0-6.1+deb11u3) but it is not going to be installed
Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
The following actions will resolve these dependencies:
Install the following packages:
1) fontconfig-config:armhf [2.14.1-4 (stable)]
2) fonts-croscore [20201225-1 (stable)]
Keep the following packages at their current version:
3) libabsl20220623 [20220623.1-1 (now, stable)]
4) libaom3 [3.6.0-1 (now, stable)]
5) libavif15 [0.11.1-1 (now, stable)]
6) libdav1d6 [1.0.0-2+deb12u1 (now, stable, stable-security)]
7) libde265-0 [1.0.11-1+deb12u2 (now, stable)]
8) libdeflate0 [1.14-1 (now, stable)]
9) libfontconfig1 [2.14.1-4 (now, stable)]
10) libgav1-1 [0.18.0-1+b1 (now, stable)]
11) libgeoip1 [1.6.12-10 (now, stable)]
12) libheif1 [1.15.1-1 (now, stable)]
13) libjbig0 [2.1-6.1 (now, stable)]
14) liblerc4 [4.0.0+ds-2 (now, stable)]
15) liblzf1 [3.6-3 (now, stable)]
16) libnginx-mod-http-auth-pam [1.18.0-6.1+deb11u3 (now)]
17) libnginx-mod-http-cache-purge [1.18.0-6.1+deb11u3 (now)]
18) libnginx-mod-http-dav-ext [1.18.0-6.1+deb11u3 (now)]
19) libnginx-mod-http-echo [1.18.0-6.1+deb11u3 (now)]
20) libnginx-mod-http-fancyindex [1.18.0-6.1+deb11u3 (now)]
21) libnginx-mod-http-geoip [1.18.0-6.1+deb11u3 (now)]
22) libnginx-mod-http-geoip2 [1.18.0-6.1+deb11u3 (now)]
23) libnginx-mod-http-headers-more-filter [1.18.0-6.1+deb11u3 (now)]
24) libnginx-mod-http-image-filter [1.18.0-6.1+deb11u3 (now)]
25) libnginx-mod-http-perl [1.18.0-6.1+deb11u3 (now)]
26) libnginx-mod-http-xslt-filter [1.18.0-6.1+deb11u3 (now)]
27) libnginx-mod-mail [1.18.0-6.1+deb11u3 (now)]
28) libnginx-mod-stream [1.18.0-6.1+deb11u3 (now)]
29) libnginx-mod-stream-geoip [1.18.0-6.1+deb11u3 (now)]
30) libnginx-mod-stream-geoip2 [1.18.0-6.1+deb11u3 (now)]
31) libnuma1 [2.0.16-1 (now, stable)]
32) libperl5.36 [Not Installed]
33) librav1e0 [0.5.1-6 (now, stable)]
34) libsvtav1enc1 [1.4.1+dfsg-1 (now, stable)]
35) libtiff6 [4.5.0-6+deb12u1 (now, stable, stable-security)]
36) libwebp7 [1.2.4-0.2+deb12u1 (now, stable, stable-security)]
37) libx265-199 [3.5-2+b1 (now, stable)]
38) libxpm4 [1:3.5.12-1.1+deb12u1 (now, stable, stable-security)]
39) libyuv0 [0.0~git20230123.b2528b0-1 (now, stable)]
40) nginx [Not Installed]
41) nginx-common [1.18.0-6.1+deb11u3 (now)]
42) perl [5.32.1-4+deb11u3 (now)]
43) perl-base [5.32.1-4+deb11u3 (now)]
44) perl-modules-5.36 [Not Installed]
45) redis-server [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
46) redis-tools [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
47) yunohost [11.2.23+202407251415 (now)]
Downgrade the following packages:
48) libgd3 [2.3.3-12+0~20240711.16+debian12~1.gbpd0ea70 (bookworm, now) -> 2.3.3-9 (stable)]
Leave the following dependencies unresolved:
49) libgeoip1 recommends geoip-database
50) yunohost recommends php7.4-common
51) yunohost recommends php7.4-fpm
52) yunohost recommends php7.4-ldap
53) yunohost recommends php7.4-intl
54) yunohost recommends mariadb-server
55) yunohost recommends php7.4-mysql
56) yunohost recommends php7.4-gd
57) yunohost recommends php7.4-curl
58) yunohost recommends php-php-gettext
59) yunohost recommends python3-pip
60) yunohost recommends metronome (>= 3.14.0)
Accept this solution? [Y/n/q/?]
```
[15:01:52]
<Aleks (he/him/il/lui)> >libgd3 [2.3.3-12+0~20240711.16+debian12~1.gbpd0ea70 (bookworm, now) -> 2.3.3-9 (stable)]
[15:01:55]
<Aleks (he/him/il/lui)> hmpf ça ressemble à un truc de backport
[15:04:02]
<Aleks (he/him/il/lui)> moi je dirais de retenter en lui disant explicitement d'installer nginx et nginx extras:
```
sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras
```
[15:08:03]
<thatoo> Ca ne semble pas s'arranger si facilement.
```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libmilter1.0.1{a} (for yunohost) libperl5.36{a} (for yunohost) nginx opendkim{a} (for yunohost) perl-modules-5.36{a} (for yunohost) python3-all{a} (for yunohost) python3-email-validator{a} (for yunohost)
python3-jwt{a} (for yunohost) python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost) python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} galera-4{u} javascript-common{u} libcgi-fast-perl{u} libcgi-pm-perl{u} libconfig-inifiles-perl{u} libdaxctl1{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u}
libhtml-template-perl{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblua5.1-0{u} liblzf1{u} liblzo2-2{u} libndctl6{u} libnginx-mod-http-lua{u} libnginx-mod-http-ndk{u} libpmem1{u} libpython3-dev{u}
libpython3.11-dev{u} libsnappy1v5{u} liburing2{u} lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u}
mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u} mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u}
php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u} php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u}
php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u} php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u}
redis-tools{u} socat{u}
The following packages will be upgraded:
libnginx-mod-http-auth-pam (for yunohost) libnginx-mod-http-cache-purge (for yunohost) libnginx-mod-http-dav-ext (for yunohost) libnginx-mod-http-echo (for yunohost) libnginx-mod-http-fancyindex (for yunohost)
libnginx-mod-http-geoip (for yunohost) libnginx-mod-http-geoip2 (for yunohost) libnginx-mod-http-headers-more-filter (for yunohost) libnginx-mod-http-image-filter (for yunohost) libnginx-mod-http-perl (for yunohost)
libnginx-mod-http-subs-filter (for yunohost) libnginx-mod-http-uploadprogress (for yunohost) libnginx-mod-http-upstream-fair (for yunohost) libnginx-mod-http-xslt-filter (for yunohost) libnginx-mod-mail (for yunohost)
libnginx-mod-nchan (for yunohost) libnginx-mod-stream (for yunohost) libnginx-mod-stream-geoip (for yunohost) libnginx-mod-stream-geoip2 (for yunohost) nginx-common (for nginx) nginx-extras{b} (for yunohost)
perl (for yunohost) perl-base yunohost
24 packages upgraded, 12 newly installed, 73 to remove and 17 not upgraded.
Need to get 12.8 MB of archives. After unpacking 214 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
nginx-extras : Depends: libnginx-mod-http-lua (>= 1:0.10.23-1~) but it is not going to be installed
open: 6213; closed: 9818; defer: 5; conflict: 5 No solution found within the allotted time. Try harder? [Y/n]
```
Est-ce que ce retour d'expérience vous est intéressant pour améliorer la migration ynh 11 vers 12 ou pas. Si oui, je veux bien me prêter à l'exercice (ici ou dans le canal de support ou en privé). Mais si ce n'est pas un cas intéressant, je ne veux pas vous prendre du temps pour un serveur qui ne contient pas de donnée importante.
[15:08:41]
<Aleks (he/him/il/lui)> >Est-ce que ce retour d'expérience vous est intéressant pour améliorer la migration ynh 11 vers 12 ou pas.
oui
[15:09:54]
<Aleks (he/him/il/lui)> essayons en rajoutant `libnginx-mod-http-lua` :
[15:09:58]
<Aleks (he/him/il/lui)> ```
sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua
```
[15:11:18]
<thatoo> ```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libmilter1.0.1{a} (for yunohost) libperl5.36{a} (for yunohost) nginx opendkim{a} (for yunohost) perl-modules-5.36{a} (for yunohost) python3-all{a} (for yunohost) python3-email-validator{a} (for yunohost)
python3-jwt{a} (for yunohost) python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost) python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} galera-4{u} javascript-common{u} libcgi-fast-perl{u} libcgi-pm-perl{u} libconfig-inifiles-perl{u} libdaxctl1{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u}
libhtml-template-perl{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblua5.1-0{u} liblzf1{u} liblzo2-2{u} libndctl6{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libsnappy1v5{u} liburing2{u}
lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
The following packages will be upgraded:
libnginx-mod-http-auth-pam (for yunohost) libnginx-mod-http-cache-purge (for yunohost) libnginx-mod-http-dav-ext (for yunohost) libnginx-mod-http-echo (for yunohost) libnginx-mod-http-fancyindex (for yunohost)
libnginx-mod-http-geoip (for yunohost) libnginx-mod-http-geoip2 (for yunohost) libnginx-mod-http-headers-more-filter (for yunohost) libnginx-mod-http-image-filter (for yunohost) libnginx-mod-http-lua{b} (for yunohost)
libnginx-mod-http-perl (for yunohost) libnginx-mod-http-subs-filter (for yunohost) libnginx-mod-http-uploadprogress (for yunohost) libnginx-mod-http-upstream-fair (for yunohost) libnginx-mod-http-xslt-filter (for yunohost)
libnginx-mod-mail (for yunohost) libnginx-mod-nchan (for yunohost) libnginx-mod-stream (for yunohost) libnginx-mod-stream-geoip (for yunohost) libnginx-mod-stream-geoip2 (for yunohost) nginx-common (for nginx)
nginx-extras (for yunohost) perl (for yunohost) perl-base yunohost
25 packages upgraded, 12 newly installed, 71 to remove and 18 not upgraded.
Need to get 13.0 MB of archives. After unpacking 213 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-http-lua : Depends: lua-resty-core (< 0.1.25.1~) but it is not installable
Depends: lua-resty-core (>= 0.1.25) but it is not installable
libnginx-mod-http-ndk : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
open: 81; closed: 300; defer: 22; conflict: 23 .The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) liblua5.1-0 [5.1.5-9 (now, stable)]
2) liblzf1 [3.6-3 (now, stable)]
3) libnginx-mod-http-auth-pam [1.18.0-6.1+deb11u3 (now)]
4) libnginx-mod-http-cache-purge [1.18.0-6.1+deb11u3 (now)]
5) libnginx-mod-http-dav-ext [1.18.0-6.1+deb11u3 (now)]
6) libnginx-mod-http-echo [1.18.0-6.1+deb11u3 (now)]
7) libnginx-mod-http-fancyindex [1.18.0-6.1+deb11u3 (now)]
8) libnginx-mod-http-geoip [1.18.0-6.1+deb11u3 (now)]
9) libnginx-mod-http-geoip2 [1.18.0-6.1+deb11u3 (now)]
10) libnginx-mod-http-headers-more-filter [1.18.0-6.1+deb11u3 (now)]
11) libnginx-mod-http-image-filter [1.18.0-6.1+deb11u3 (now)]
12) libnginx-mod-http-lua [1.18.0-6.1+deb11u3 (now)]
13) libnginx-mod-http-perl [1.18.0-6.1+deb11u3 (now)]
14) libnginx-mod-http-subs-filter [1.18.0-6.1+deb11u3 (now)]
15) libnginx-mod-http-uploadprogress [1.18.0-6.1+deb11u3 (now)]
16) libnginx-mod-http-upstream-fair [1.18.0-6.1+deb11u3 (now)]
17) libnginx-mod-http-xslt-filter [1.18.0-6.1+deb11u3 (now)]
18) libnginx-mod-mail [1.18.0-6.1+deb11u3 (now)]
19) libnginx-mod-nchan [1.18.0-6.1+deb11u3 (now)]
20) libnginx-mod-stream [1.18.0-6.1+deb11u3 (now)]
21) libnginx-mod-stream-geoip [1.18.0-6.1+deb11u3 (now)]
22) libnginx-mod-stream-geoip2 [1.18.0-6.1+deb11u3 (now)]
23) libperl5.36 [Not Installed]
24) nginx [Not Installed]
25) nginx-common [1.18.0-6.1+deb11u3 (now)]
26) nginx-extras [1.18.0-6.1+deb11u3 (now)]
27) perl [5.32.1-4+deb11u3 (now)]
28) perl-base [5.32.1-4+deb11u3 (now)]
29) perl-modules-5.36 [Not Installed]
30) redis-server [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
31) redis-tools [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
32) yunohost [11.2.23+202407251415 (now)]
Leave the following dependencies unresolved:
33) perl-modules-5.36 recommends perl (>= 5.36.0-1)
34) yunohost recommends php7.4-common
35) yunohost recommends php7.4-fpm
36) yunohost recommends php7.4-ldap
37) yunohost recommends php7.4-intl
38) yunohost recommends mariadb-server
39) yunohost recommends php7.4-mysql
40) yunohost recommends php7.4-gd
41) yunohost recommends php7.4-curl
42) yunohost recommends php-php-gettext
43) yunohost recommends python3-pip
44) yunohost recommends metronome (>= 3.14.0)
Accept this solution? [Y/n/q/?]
```
[15:11:18]
<Aleks (he/him/il/lui)> t'es sur ARM c'est ça ?
[15:11:18]
<thatoo> oui, un raspi 4
[15:12:06]
<Aleks (he/him/il/lui)> zzzzz
[15:12:27]
<Aleks (he/him/il/lui)> ```
sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua nginx-common lua-resty-core
```
[15:13:23]
<thatoo> ```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua nginx-common lua-resty-core
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libmilter1.0.1{a} (for yunohost) libperl5.36{a} (for yunohost) lua-resty-core{b} nginx opendkim{a} (for yunohost) perl-modules-5.36{a} (for yunohost) python3-all{a} (for yunohost) python3-email-validator{a} (for yunohost)
python3-jwt{a} (for yunohost) python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost) python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} galera-4{u} javascript-common{u} libcgi-fast-perl{u} libcgi-pm-perl{u} libconfig-inifiles-perl{u} libdaxctl1{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u}
libhtml-template-perl{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblua5.1-0{u} liblzf1{u} liblzo2-2{u} libndctl6{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libsnappy1v5{u} liburing2{u}
lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
The following packages will be upgraded:
libnginx-mod-http-auth-pam (for yunohost) libnginx-mod-http-cache-purge (for yunohost) libnginx-mod-http-dav-ext (for yunohost) libnginx-mod-http-echo (for yunohost) libnginx-mod-http-fancyindex (for yunohost)
libnginx-mod-http-geoip (for yunohost) libnginx-mod-http-geoip2 (for yunohost) libnginx-mod-http-headers-more-filter (for yunohost) libnginx-mod-http-image-filter (for yunohost)
libnginx-mod-http-lua (for lua-resty-core, yunohost) libnginx-mod-http-perl (for yunohost) libnginx-mod-http-subs-filter (for yunohost) libnginx-mod-http-uploadprogress (for yunohost)
libnginx-mod-http-upstream-fair (for yunohost) libnginx-mod-http-xslt-filter (for yunohost) libnginx-mod-mail (for yunohost) libnginx-mod-nchan (for yunohost) libnginx-mod-stream (for yunohost)
libnginx-mod-stream-geoip (for yunohost) libnginx-mod-stream-geoip2 (for yunohost) nginx-common (for nginx) nginx-extras (for yunohost) perl (for yunohost) perl-base yunohost
25 packages upgraded, 13 newly installed, 71 to remove and 18 not upgraded.
Need to get 13.0 MB of archives. After unpacking 213 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnginx-mod-http-ndk : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
lua-resty-core : Depends: libluajit2-5.1-2 but it is not going to be installed
Depends: lua-resty-lrucache but it is not installable
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
open: 140; closed: 591; defer: 22; conflict: 23 oThe following actions will resolve these dependencies:
Keep the following packages at their current version:
1) liblua5.1-0 [5.1.5-9 (now, stable)]
2) liblzf1 [3.6-3 (now, stable)]
3) libnginx-mod-http-auth-pam [1.18.0-6.1+deb11u3 (now)]
4) libnginx-mod-http-cache-purge [1.18.0-6.1+deb11u3 (now)]
5) libnginx-mod-http-dav-ext [1.18.0-6.1+deb11u3 (now)]
6) libnginx-mod-http-echo [1.18.0-6.1+deb11u3 (now)]
7) libnginx-mod-http-fancyindex [1.18.0-6.1+deb11u3 (now)]
8) libnginx-mod-http-geoip [1.18.0-6.1+deb11u3 (now)]
9) libnginx-mod-http-geoip2 [1.18.0-6.1+deb11u3 (now)]
10) libnginx-mod-http-headers-more-filter [1.18.0-6.1+deb11u3 (now)]
11) libnginx-mod-http-image-filter [1.18.0-6.1+deb11u3 (now)]
12) libnginx-mod-http-lua [1.18.0-6.1+deb11u3 (now)]
13) libnginx-mod-http-perl [1.18.0-6.1+deb11u3 (now)]
14) libnginx-mod-http-subs-filter [1.18.0-6.1+deb11u3 (now)]
15) libnginx-mod-http-uploadprogress [1.18.0-6.1+deb11u3 (now)]
16) libnginx-mod-http-upstream-fair [1.18.0-6.1+deb11u3 (now)]
17) libnginx-mod-http-xslt-filter [1.18.0-6.1+deb11u3 (now)]
18) libnginx-mod-mail [1.18.0-6.1+deb11u3 (now)]
19) libnginx-mod-nchan [1.18.0-6.1+deb11u3 (now)]
20) libnginx-mod-stream [1.18.0-6.1+deb11u3 (now)]
21) libnginx-mod-stream-geoip [1.18.0-6.1+deb11u3 (now)]
22) libnginx-mod-stream-geoip2 [1.18.0-6.1+deb11u3 (now)]
23) libperl5.36 [Not Installed]
24) lua-resty-core [Not Installed]
25) nginx [Not Installed]
26) nginx-common [1.18.0-6.1+deb11u3 (now)]
27) nginx-extras [1.18.0-6.1+deb11u3 (now)]
28) perl [5.32.1-4+deb11u3 (now)]
29) perl-base [5.32.1-4+deb11u3 (now)]
30) perl-modules-5.36 [Not Installed]
31) redis-server [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
32) redis-tools [5:7.0.15-1~deb12u1 (now, stable, stable-security)]
33) yunohost [11.2.23+202407251415 (now)]
Leave the following dependencies unresolved:
34) perl-modules-5.36 recommends perl (>= 5.36.0-1)
35) yunohost recommends php7.4-common
36) yunohost recommends php7.4-fpm
37) yunohost recommends php7.4-ldap
38) yunohost recommends php7.4-intl
39) yunohost recommends mariadb-server
40) yunohost recommends php7.4-mysql
41) yunohost recommends php7.4-gd
42) yunohost recommends php7.4-curl
43) yunohost recommends php-php-gettext
44) yunohost recommends python3-pip
45) yunohost recommends metronome (>= 3.14.0)
Accept this solution? [Y/n/q/?]
```
[15:13:42]
<Aleks (he/him/il/lui)> ah god le retour de la vengeance de libluajit
[15:15:08]
<Aleks (he/him/il/lui)> bon ben:
```
sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua nginx-common lua-resty-core libluajit2-5.1-2 lua-resty-lrucache
```
...
[15:15:40]
<Aleks (he/him/il/lui)> adore faire le travail du package manager à sa place
[15:16:10]
<thatoo> ```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat nginx nginx-extras libnginx-mod-http-lua nginx-common lua-resty-core libluajit2-5.1-2 lua-resty-lrucache
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libluajit2-5.1-2{b} libmilter1.0.1{a} (for yunohost) libperl5.36{a} (for yunohost) lua-resty-core lua-resty-lrucache nginx opendkim{a} (for yunohost) perl-modules-5.36{a} (for yunohost) python3-all{a} (for yunohost)
python3-email-validator{a} (for yunohost) python3-jwt{a} (for yunohost) python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost) python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} galera-4{u} javascript-common{u} libcgi-fast-perl{u} libcgi-pm-perl{u} libconfig-inifiles-perl{u} libdaxctl1{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u}
libhtml-template-perl{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblua5.1-0{u} libluajit-5.1-2{a} liblzf1{u} liblzo2-2{u} libndctl6{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libsnappy1v5{u}
liburing2{u} lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
The following packages will be upgraded:
libnginx-mod-http-auth-pam (for yunohost) libnginx-mod-http-cache-purge (for yunohost) libnginx-mod-http-dav-ext (for yunohost) libnginx-mod-http-echo (for yunohost) libnginx-mod-http-fancyindex (for yunohost)
libnginx-mod-http-geoip (for yunohost) libnginx-mod-http-geoip2 (for yunohost) libnginx-mod-http-headers-more-filter (for yunohost) libnginx-mod-http-image-filter (for yunohost)
libnginx-mod-http-lua (for lua-resty-core, yunohost) libnginx-mod-http-perl (for yunohost) libnginx-mod-http-subs-filter (for yunohost) libnginx-mod-http-uploadprogress (for yunohost)
libnginx-mod-http-upstream-fair (for yunohost) libnginx-mod-http-xslt-filter (for yunohost) libnginx-mod-mail (for yunohost) libnginx-mod-nchan (for yunohost) libnginx-mod-stream (for yunohost)
libnginx-mod-stream-geoip (for yunohost) libnginx-mod-stream-geoip2 (for yunohost) nginx-common (for nginx) nginx-extras (for yunohost) perl (for yunohost) perl-base yunohost
25 packages upgraded, 15 newly installed, 72 to remove and 18 not upgraded.
Need to get 13.3 MB of archives. After unpacking 213 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
luajit : Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20220320+dfsg-4.1) but it is not going to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libluajit2-5.1-2 : Depends: libluajit2-5.1-common (= 2.1-20230119-1) but it is not going to be installed
libnginx-mod-http-ndk : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
The following actions will resolve these dependencies:
Remove the following packages:
1) libluajit-5.1-common [2.1.0~beta3+git20220320+dfsg-4.1 (now, stable)]
2) luajit [2.1.0~beta3+git20220320+dfsg-4.1 (now, stable)]
Install the following packages:
3) libluajit2-5.1-common [2.1-20230119-1 (stable)]
Upgrade the following packages:
4) libalgorithm-diff-xs-perl [0.04-6+b1 (now) -> 0.04-8+b1 (stable)]
5) libclone-perl [0.45-1+b1 (now) -> 0.46-1 (stable)]
6) libdbi-perl [1.643-3+b1 (now) -> 1.643-4 (stable)]
7) libfile-fcntllock-perl [0.22-3+b7 (now) -> 0.22-4+b1 (stable)]
8) libgssapi-perl [0.28-3+b3 (now) -> 0.28-4+b1 (stable)]
9) libhtml-parser-perl [3.75-1+b1 (now) -> 3.81-1 (stable)]
10) liblocale-gettext-perl [1.07-4+b1 (now) -> 1.07-5 (stable)]
11) libnet-dns-sec-perl [1.18-1+b1 (now) -> 1.20-1+b1 (stable)]
12) libnet-libidn-perl [0.12.ds-3+b3 (now) -> 0.12.ds-4+b1 (stable)]
13) libnet-ssleay-perl [1.88-3+b1 (now) -> 1.92-2+b1 (stable)]
14) libnetaddr-ip-perl [4.079+dfsg-1+b5 (now) -> 4.079+dfsg-2+b1 (stable)]
15) libnginx-mod-http-ndk [1.18.0-6.1+deb11u3 (now) -> 1:0.3.2-3 (stable)]
16) libsocket6-perl [0.29-1+b3 (now) -> 0.29-3 (stable)]
17) libtext-charwidth-perl [0.04-10+b1 (now) -> 0.04-11 (stable)]
18) libtext-iconv-perl [1.7-7+b1 (now) -> 1.7-8 (stable)]
19) perl-openssl-defaults [5 (now) -> 7+b1 (stable)]
Accept this solution? [Y/n/q/?]
```
[15:17:19]
<Aleks (he/him/il/lui)> ouai ça a l'air pas mal mais avant d'accepter sauvagement ça comme ça j'aimerais voir si ça donne le même résutlat en mentionnant moins de truc:
[15:17:42]
<Aleks (he/him/il/lui)> `sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat libluajit2-5.1-2`
[15:18:25]
<thatoo> ```
administrateur@yunohost:~ $ sudo aptitude full-upgrade --show-why yunohost yunohost-admin yunohost-portal moulinette ssowat libluajit2-5.1-2
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
yunohost-admin is already installed at the latest version (12.0.0+202403262345), so it will not be upgraded
moulinette is already installed at the latest version (12.0.0+202407171700), so it will not be upgraded
ssowat is already installed at the latest version (12.0.0+202403291800), so it will not be upgraded
The following NEW packages will be installed:
libluajit2-5.1-2{b} libmilter1.0.1{a} (for yunohost) libperl5.36{a} (for yunohost) lua-resty-core{a} (for yunohost) lua-resty-lrucache{a} (for yunohost) nginx{a} (for yunohost) opendkim{a} (for yunohost)
perl-modules-5.36{a} (for yunohost) python3-all{a} (for yunohost) python3-email-validator{a} (for yunohost) python3-jwt{a} (for yunohost) python3-magic{a} (for yunohost) python3-passlib{a} (for yunohost)
python3-pydantic{a} (for yunohost) yunohost-portal
The following packages will be REMOVED:
debsuryorg-archive-keyring{u} galera-4{u} javascript-common{u} libcgi-fast-perl{u} libcgi-pm-perl{u} libconfig-inifiles-perl{u} libdaxctl1{u} libexpat1-dev{u} libfcgi-bin{u} libfcgi-perl{u} libfcgi0ldbl{u}
libhtml-template-perl{u} libjs-jquery{u} libjs-sphinxdoc{u} libjs-underscore{u} liblua5.1-0{u} libluajit-5.1-2{a} liblzf1{u} liblzo2-2{u} libndctl6{u} libpmem1{u} libpython3-dev{u} libpython3.11-dev{u} libsnappy1v5{u}
liburing2{u} lua-bitop{u} lua-event{u} lua-expat{u} lua-ldap{u} lua-rex-pcre{u} lua-sec{u} lua-zlib{u} lua5.3{u} mariadb-client{u} mariadb-client-core{u} mariadb-plugin-provider-bzip2{u} mariadb-plugin-provider-lz4{u}
mariadb-plugin-provider-lzma{u} mariadb-plugin-provider-lzo{u} mariadb-plugin-provider-snappy{u} mariadb-server{u} mariadb-server-core{u} metronome{u} php-common{u} php-mbstring{u} php-pear{u} php-php-gettext{u}
php-xml{u} php7.4-cli{u} php7.4-common{u} php7.4-curl{u} php7.4-fpm{u} php7.4-gd{u} php7.4-intl{u} php7.4-json{u} php7.4-ldap{u} php7.4-mbstring{u} php7.4-mysql{u} php7.4-opcache{u} php7.4-readline{u} php7.4-xml{u}
php8.2-common{u} php8.2-mbstring{u} php8.2-xml{u} pv{u} python3-dev{u} python3-pip{u} python3-wheel{u} python3.11-dev{u} redis-server{u} redis-tools{u} socat{u}
The following packages will be upgraded:
libnginx-mod-http-auth-pam (for yunohost) libnginx-mod-http-cache-purge (for yunohost) libnginx-mod-http-dav-ext (for yunohost) libnginx-mod-http-echo (for yunohost) libnginx-mod-http-fancyindex (for yunohost)
libnginx-mod-http-geoip (for yunohost) libnginx-mod-http-geoip2 (for yunohost) libnginx-mod-http-headers-more-filter (for yunohost) libnginx-mod-http-image-filter (for yunohost) libnginx-mod-http-lua (for yunohost)
libnginx-mod-http-perl (for yunohost) libnginx-mod-http-subs-filter (for yunohost) libnginx-mod-http-uploadprogress (for yunohost) libnginx-mod-http-upstream-fair (for yunohost) libnginx-mod-http-xslt-filter (for yunohost)
libnginx-mod-mail (for yunohost) libnginx-mod-nchan (for yunohost) libnginx-mod-stream (for yunohost) libnginx-mod-stream-geoip (for yunohost) libnginx-mod-stream-geoip2 (for yunohost) nginx-common (for yunohost)
nginx-extras (for yunohost) perl (for yunohost) perl-base yunohost
25 packages upgraded, 15 newly installed, 72 to remove and 18 not upgraded.
Need to get 13.3 MB of archives. After unpacking 213 MB will be freed.
The following packages have unmet dependencies:
libnetaddr-ip-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-ssleay-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
luajit : Depends: libluajit-5.1-2 (= 2.1.0~beta3+git20220320+dfsg-4.1) but it is not going to be installed
libdbi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libluajit2-5.1-2 : Depends: libluajit2-5.1-common (= 2.1-20230119-1) but it is not going to be installed
libnginx-mod-http-ndk : Depends: nginx-common (= 1.18.0-6.1+deb11u3) but 1.22.1-9 is to be installed
libsocket6-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
liblocale-gettext-perl : PreDepends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libfile-fcntllock-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-dns-sec-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-charwidth-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libhtml-parser-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libnet-libidn-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libclone-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libtext-iconv-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
libgssapi-perl : Depends: perlapi-5.32.0 which is a virtual package, provided by:
- perl-base (5.32.1-4+deb11u3), but 5.36.0-7+deb12u1 is to be installed
The following actions will resolve these dependencies:
Remove the following packages:
1) libluajit-5.1-common [2.1.0~beta3+git20220320+dfsg-4.1 (now, stable)]
2) luajit [2.1.0~beta3+git20220320+dfsg-4.1 (now, stable)]
Install the following packages:
3) libluajit2-5.1-common [2.1-20230119-1 (stable)]
Upgrade the following packages:
4) libalgorithm-diff-xs-perl [0.04-6+b1 (now) -> 0.04-8+b1 (stable)]
5) libclone-perl [0.45-1+b1 (now) -> 0.46-1 (stable)]
6) libdbi-perl [1.643-3+b1 (now) -> 1.643-4 (stable)]
7) libfile-fcntllock-perl [0.22-3+b7 (now) -> 0.22-4+b1 (stable)]
8) libgssapi-perl [0.28-3+b3 (now) -> 0.28-4+b1 (stable)]
9) libhtml-parser-perl [3.75-1+b1 (now) -> 3.81-1 (stable)]
10) liblocale-gettext-perl [1.07-4+b1 (now) -> 1.07-5 (stable)]
11) libnet-dns-sec-perl [1.18-1+b1 (now) -> 1.20-1+b1 (stable)]
12) libnet-libidn-perl [0.12.ds-3+b3 (now) -> 0.12.ds-4+b1 (stable)]
13) libnet-ssleay-perl [1.88-3+b1 (now) -> 1.92-2+b1 (stable)]
14) libnetaddr-ip-perl [4.079+dfsg-1+b5 (now) -> 4.079+dfsg-2+b1 (stable)]
15) libnginx-mod-http-ndk [1.18.0-6.1+deb11u3 (now) -> 1:0.3.2-3 (stable)]
16) libsocket6-perl [0.29-1+b3 (now) -> 0.29-3 (stable)]
17) libtext-charwidth-perl [0.04-10+b1 (now) -> 0.04-11 (stable)]
18) libtext-iconv-perl [1.7-7+b1 (now) -> 1.7-8 (stable)]
19) perl-openssl-defaults [5 (now) -> 7+b1 (stable)]
Accept this solution? [Y/n/q/?]
```
[15:18:59]
<Aleks (he/him/il/lui)> hmmouai ça a l'air pas mal
[15:19:16]
<thatoo> On a la même chose en effet
[15:19:25]
<Aleks (he/him/il/lui)> du coup moi je ferais "Y"
[15:19:56]
<Aleks (he/him/il/lui)> et pour mysql/mariadb, c'est normal que ce soit enlevé si aucune app installée ne l'utilise, parce que par défaut on installe plus mariadb (ni php)
[15:30:51]
<thatoo> Je suis dans la webadmin et "Propulsé par YunoHost 12.0.0+202407251730 (unstable)." 👍️
[15:34:17]
<thatoo> tous les services sont "en cours" et "Aucune migration en attente" et les diagnostiques semblent ok
[15:34:36]
<thatoo> On dirait que la migration s'est terminée par un succès.
[15:35:14]
<Aleks (he/him/il/lui)> https://www.memesmonkey.com/images/memesmonkey/20/202f8f8237d5badcd0a6e0e3f66b886d.jpeg
[16:39:58]
<Yunohost Git/Infra notifications> [apps] ericgaspar created new branch Galène
[16:39:59]
<Yunohost Git/Infra notifications> [apps] ericgaspar opened [pull request #2485](https://github.com/YunoHost/apps/pull/2485): Add potential alternative to
[16:39:59]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to Galène: Add potential alternative to ([2e0a05a6](https://github.com/YunoHost/apps/commit/2e0a05a6738b692d988dbf0b83229d139afd4981))
[16:40:12]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] opened [pull request #2486](https://github.com/YunoHost/apps/pull/2486): Format TOML with Taplo
[16:40:16]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] pushed 1 commit to actions/toml: :art: Format TOML with Taplo ([9620b54e](https://github.com/YunoHost/apps/commit/9620b54e1a1c764de9e2bd862e4d21ebfb27453b))
[16:40:16]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] created new branch actions/toml
[16:40:20]
<Yunohost Git/Infra notifications> [apps] ericgaspar merged [pull request #2485](https://github.com/YunoHost/apps/pull/2485): Add potential alternative to
[16:40:21]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to master: Add potential alternative to (#2485) ([a41644bf](https://github.com/YunoHost/apps/commit/a41644bfa0af2d4bfb8ca866c5f21ae7258e9757))
[16:40:23]
<Yunohost Git/Infra notifications> [apps] ericgaspar deleted branch Galène
[16:40:23]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2486](https://github.com/YunoHost/apps/pull/2486): Format TOML with Taplo
[16:40:28]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] pushed 1 commit to actions/toml: :art: Format TOML with Taplo ([a62b26ae](https://github.com/YunoHost/apps/commit/a62b26aed912919a9a91fd07d257335790946d96))
[16:40:34]
<Yunohost Git/Infra notifications> [apps] yunohost-bot pushed 1 commit to master: Automatically add dates to the catalog files ([2b3a5d35](https://github.com/YunoHost/apps/commit/2b3a5d353b65c4cc0727d9a2e41061fd9a49f0ee))
[16:40:50]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] closed [pull request #2486](https://github.com/YunoHost/apps/pull/2486): Format TOML with Taplo
[16:41:48]
<Yunohost Git/Infra notifications> [nextcloud_ynh] ericgaspar pushed 1 commit to v2_PostgreSQL: Update upgrade ([8a090a96](https://github.com/YunoHost-Apps/nextcloud_ynh/commit/8a090a966260733a16f9f9b91c0daa5d418dd74b))
[17:00:55]
<Yunohost Git/Infra notifications> [apps] yunohost-bot opened [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[17:00:55]
<Yunohost Git/Infra notifications> [apps] yunohost-bot created new branch update_app_levels
[17:00:55]
<Yunohost Git/Infra notifications> [apps] yunohost-bot pushed 1 commit to update_app_levels: Update app levels according to CI results ([a521c214](https://github.com/YunoHost/apps/commit/a521c21442aca0d44b38523076c9af144b0dd224))
[17:01:02]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] pushed 2 commits to actions/toml ([2b3a5d353b65...b8f739fa8824](https://github.com/YunoHost/apps/compare/2b3a5d353b65...b8f739fa8824))
[17:01:04]
<Yunohost Git/Infra notifications> [apps] github-actions[bot] opened [pull request #2488](https://github.com/YunoHost/apps/pull/2488): Format TOML with Taplo
[17:02:59]
<thatoo> Autre succès du jour (sur le raspi 4) :
```
Info: [####################] > Installation of dokos completed
Success! Installation completed
```
Un raspi 3 n'arrive pas à le builder mais un raspi 4 oui.
[18:04:12]
<Yunohost Git/Infra notifications> App penpot goes down from level 7 to 6 in job [#29080](https://ci-apps.yunohost.org/ci/job/29080)
[18:43:45]
<Yunohost Git/Infra notifications> [apps] ericgaspar deleted branch actions/toml
[18:43:46]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to update_app_levels: :art: Format TOML with Taplo (#2488) Co-authored-by: yunohost-bot <14998418+yunohost-bot@users.noreply.github.com> ([7db84396](https://github.com/YunoHost/apps/commit/7db84396eb137533daaa8d5fa1cc26c5cefad91e))
[18:43:46]
<Yunohost Git/Infra notifications> [apps] ericgaspar merged [pull request #2488](https://github.com/YunoHost/apps/pull/2488): Format TOML with Taplo
[19:04:58]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to update_app_levels: Update apps.toml ([5a4b6079](https://github.com/YunoHost/apps/commit/5a4b6079063872ce39c8ee66e041e30e4f185cbc))
[19:05:04]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[19:05:53]
<Yunohost Git/Infra notifications> App cinny goes down from level 8 to 1 in job [#29054](https://ci-apps.yunohost.org/ci/job/29054)
[19:18:05]
<Yunohost Git/Infra notifications> [nextcloud_ynh] ericgaspar pushed 1 commit to v2_PostgreSQL: Update upgrade ([7d25e4ec](https://github.com/YunoHost-Apps/nextcloud_ynh/commit/7d25e4ecaf14da55b9ca6d32cbbc0b43226e13e6))
[19:18:38]
<Yunohost Git/Infra notifications> [nextcloud_ynh] ericgaspar [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2253331734) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: testme
[19:18:45]
<Yunohost Git/Infra notifications> [nextcloud_ynh] yunohost-bot [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2253331980) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: :bug:
[[Test Badge](https://img.shields.io/endpoint?url=https://ci-apps-bookworm-dev.yunohost.org/ci/api/job/2008/badge...
[19:18:45]
<Yunohost Git/Infra notifications> [nextcloud_ynh] yunohost-bot [commented](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597#issuecomment-2253331968) on [issue #597](https://github.com/YunoHost-Apps/nextcloud_ynh/pull/597) V2 postgresql: Meow :cat2:
[[Test Badge](https://img.shields.io/endpoint?url=https://ci-apps-dev.yunohost.org/ci/api/job/17922/badge)]...
[19:32:24]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to update_app_levels: Update apps.toml ([a7d8cb6d](https://github.com/YunoHost/apps/commit/a7d8cb6df36e6fb7567d1e898990d76cf10a6d3b))
[19:33:09]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[19:38:29]
<marc-flender> coucou, j'ai besoin de quelqu'un pour réveiller Yunohost_bot. Un petit "!testme" ne serait pas de refus ici SVP:
[19:38:34]
<marc-flender> https://github.com/YunoHost-Apps/my_webdav_ynh/pull/11
[19:38:54]
<marc-flender> Merci d'avance
[19:39:02]
<marc-flender> car ça ne fonctionne toujours pas quand c'est moi qui commente
[19:50:44]
<Aleks (he/him/il/lui)> (done)
[19:58:53]
<Yunohost Git/Infra notifications> App freshrss rises from level 6 to 8 in job [#29082](https://ci-apps.yunohost.org/ci/job/29082) !
[20:05:10]
<marc-flender> > <@Alekswag:matrix.org> (done)
merci
[20:07:06]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[21:03:06]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[21:05:30]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to update_app_levels: Update apps.toml ([76085a14](https://github.com/YunoHost/apps/commit/76085a140574542620f1461fe8843bb8ee0a5261))
[21:06:48]
<Yunohost Git/Infra notifications> [apps] ericgaspar pushed 1 commit to update_app_levels: Revert "Update apps.toml" This reverts commit 76085a140574542620f1461fe8843bb8ee0a5261. ([e49a50e9](https://github.com/YunoHost/apps/commit/e49a50e942464b585447b7cb3d0e5ceea4e683eb))
[21:49:06]
<Yunohost Git/Infra notifications> [apps] ericgaspar edited [pull request #2487](https://github.com/YunoHost/apps/pull/2487): Update app levels according to CI results
[22:03:10]
<Yunohost Git/Infra notifications> App adguardhome goes down from level 8 to 6 in job [#29057](https://ci-apps.yunohost.org/ci/job/29057)