November
Mon	Tue	Wed	Thu	Fri	Sat	Sun
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30

[09:25:39] <mrflos> Depuis l'accueil admin Yunohost dans > " Comptes" > bouton " Groupes et autorisations " en bas ya le groupe administrateur.ices
[10:24:57] <raulgarg> Hello everyone! Is DynDNS working for you? I've tried to renew my noho.st domain but I get "The peer didn't know the key we used"
[10:27:01] <cat17katze> Yes there is a problem. It is tried to fix. Forum post: https://forum.yunohost.org/t/dns-failure-peer-didnt-know-the-key-we-used/31629
[10:28:43] <raulgarg> Okay thanks, let's hope it can be fixed easily
[12:43:56] <Seb l'e-Woke végétal> > <@mrfloss:matrix.org> Depuis l'accueil admin Yunohost dans > " Comptes" > bouton " Groupes et autorisations " en bas ya le groupe administrateur.ices

Je suis bien dans les administrateurs. Et en compte individuel, je suis bien aussi avec les autorisations SSH.
[13:07:13] <hercut> Bonjour à tous, je suis toujours dans l'optique de vouloir remettre sur pied mon serveur.
J'ai diagnosis qui m'envoie ca :
```
=================================
Base system (basesystem)
=================================

[ERROR] You are running inconsistent versions of the YunoHost packages… most probably because of a failed or partial upgrade.
- yunohost version: 12.0.6 (stable)
- yunohost-admin version: 11.3.0 (stable)
- yunohost-portal version: ? (stable)
- moulinette version: 12.0.3 (stable)
- ssowat version: 12.0.3 (stable)

[WARNING] There's been a suspiciously high number of authentication failures recently. You may want to make sure that fail2ban is running and is correctly configured, or use a custom port for SSH as explained in https://yunohost.org/security.



=================================
Internet connectivity (ip)
=================================

[WARNING] DNS resolution seems to be working, but it looks like you're using a custom /etc/resolv.conf.
- The file /etc/resolv.conf should be a symlink to /etc/resolvconf/run/resolv.conf itself pointing to 127.0.0.1 (dnsmasq). If you want to manually configure DNS resolvers, please edit /etc/resolv.dnsmasq.conf.



=================================
Web (web)
=================================

[ERROR] Domain cryptpad.celien.link appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain invidious.celien.link appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain nt.celien.link appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain piped.celien.link appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain jbv.cloud appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain ninja.jbv.cloud appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain readeck.jbv.cloud appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.

[ERROR] Domain yt.jbv.cloud appears unreachable through HTTP from outside the local network in IPv4, though it works in IPv6.
- It looks like another machine (maybe your internet router) answered instead of your server.
1. The most common cause for this issue is that port 80 (and 443) are not correctly forwarded to your server.
2. On more complex setups: make sure that no firewall or reverse-proxy is interfering.



=================================
Services status check (services)
=================================

[WARNING] Configuration is broken for service fail2ban!
- ERROR: cannot import name 'MutableMapping' from 'collections' (/usr/lib/python3.11/collections/__init__.py)

[WARNING] Service yunohost-portal-api is unknown :(
- You can try to restart the service, and if it doesn't work, have a look at the service logs in the webadmin (from the command line, you can do this with 'yunohost service restart yunohost-portal-api' and 'yunohost service log yunohost-portal-api').

[ERROR] Service yunomdns is failed :(
- You can try to restart the service, and if it doesn't work, have a look at the service logs in the webadmin (from the command line, you can do this with 'yunohost service restart yunomdns' and 'yunohost service log yunomdns').



=================================
System configurations (regenconf)
=================================

[WARNING] Configuration file /etc/apt/sources.list.d/extra_php_version.list appears to have been manually modified.
- This is probably OK if you know what you're doing! YunoHost will stop updating this file automatically… But beware that YunoHost upgrades could contain important recommended changes. If you want to, you can inspect the differences with 'yunohost tools regen-conf apt --dry-run --with-diff' and force the reset to the recommended configuration with 'yunohost tools regen-conf apt --force'
```
[13:14:48] <Salamandar> Salut, on t'a déjà dit, tu es au milieu d'une migration, il faut que tu la termines
[13:15:20] <hercut> > <@Salamandar:matrix.org> Salut, on t'a déjà dit, tu es au milieu d'une migration, il faut que tu la termines

Ok, merci, mais je dois faire comment ?
[13:16:25] <hercut> mais il y a eu une erreur
[13:16:47] <hercut> J'ai fait ce que ma dit Aleks : `apt full-upgrade -o APT::Force-LoopBreak=1 -o Dpkg::Options::='--force-confold'`
[13:17:15] <geoma> > <@titus:pijean.ovh> Do you need to publish anything publicly on the Internet? If not, you may simply use the Tailscale clients to connect to your server.

I am hosting a website with yunohost and gancio, which is public, of course... This is the top priority of what I need to get working and public available... Although I also have an owncast and castopod instance, would like to host a jitsi meet server, maybe a mastodon instance also. All these are public websites. I am sorry I am very noob in network knowledge. Would you recommend me doing a setup with tailscale or headscale or another thing?
[13:17:40] <geoma> https://forum.yunohost.org/t/recommended-way-to-bypass-isp-blocking-port-forwarding/32037
[13:18:42] <Salamandar> > <@hercut:matrix.org> J'ai fait ce que ma dit Aleks : `apt full-upgrade -o APT::Force-LoopBreak=1 -o Dpkg::Options::='--force-confold'`

quelle erreur ?
[13:19:37] <hercut> > <@Salamandar:matrix.org> quelle erreur ?

C'est la que ca coince, je n'arrives pas a trouver le log, la webadmin ne foncitonne pas :/
[13:19:57] <Salamandar> si tu as lancé la commande à la main, tu n'as pas ces log
[13:20:28] <Salamandar> bref, relance la commande et donne l'erreur
[13:20:50] <hercut> en ssh il n'y as pas d'historique ?
[13:24:34] <isAAAc> > Hello hello. J'ai quelqu'un qui a un soucis avec le plugin de tchat Peertube. Y'a des requêtes dont la réponse a une en-tête "x-sso-wat: You've just been SSOed", qui m'a l'air complètement étrangère à Peertube. C'est un truc yunohost ? Qu'est ce qui peut expliquer qu'on ai ça sur un appel d'API sur une URL censée être gérée par Peertube ?

John Livingston: c'est corrigé avec la maj peertube_ynh 6.3.3~ynh1
[13:25:47] <isAAAc> et/ou ynh 12.0.7 je ne sais pas ce qui a corrigé exactement
[13:32:49] <geoma> > <@geoma:matrix.org> I am hosting a website with yunohost and gancio, which is public, of course... This is the tip priority of what I need to get working and public available... Although I also have an owncast and castopod instance, would like to host a jitsi meet server, maybe a mastodon instance also. All these are public websites. I am sorry I an very noob in network knowledge. Would you recommend me doing a setup with tailscale or headscale or another thing?

I also have the option of using IPv6 with my CGNAT ISP, I dont know if that helps
[13:43:00] <hercut> > <@Salamandar:matrix.org> bref, relance la commande et donne l'erreur

ca fait ca :
`Waiting for cache lock: Could not get lock /var/lib/dpkg/lock-frontend. It is held by process 595409 (apt)... 876s`
Pas sur que ca soit normal ?

[13:52:09] <rodinux> > <@hercut:matrix.org> ca fait ca :
> `Waiting for cache lock: Could not get lock /var/lib/dpkg/lock-frontend. It is held by process 595409 (apt)... 876s`
> Pas sur que ca soit normal ?

Il doit y avoir un processus qui bloque essaye de faire ces commandes
```
sudo lsof /var/lib/dpkg/lock
sudo lsof /var/lib/apt/lists/lock
sudo lsof /var/cache/apt/archives/lock
```
[13:52:52] <rodinux> Puis de tuer les processus
```
sudo kill -9 <PID>
```
[13:53:07] <hercut> ok je vaias essayer
[13:53:17] <rodinux> Attendsn juste cela plutôt
[13:53:21] <rodinux> sudo lsof /var/lib/dpkg/lock-frontend
[13:53:55] <rodinux> Puis
```
sudo kill -9 <PID>
[13:54:02] <hercut> > <@rodinux:matrix.org> sudo lsof /var/lib/dpkg/lock-frontend

apt 595409 root 4uW REG 8,2 0 48365689 /var/lib/dpkg/lock-frontend
[13:55:01] <rodinux> ```
kill -9 595409
```
[13:55:39] <hercut> je relance la commande ?
[13:56:11] <rodinux> Puis
```
rm /var/lib/dpkg/lock-frontend
dpkg --configure -a
```
[13:58:03] <hercut> > <@rodinux:matrix.org> Puis
> ```
> rm /var/lib/dpkg/lock-frontend
> dpkg --configure -a
> ```

dpkg: warning: 'ldconfig' not found in PATH or not executable
dpkg: warning: 'start-stop-daemon' not found in PATH or not executable
dpkg: error: 2 expected programs not found in PATH or not executable
Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin
[13:59:17] <rodinux> Peut-être que tu n'es pas en root ? ces commandes avec sudo ?
[13:59:41] <rodinux> ```
sudo rm /var/lib/dpkg/lock-frontend
sudo dpkg --configure -a
```
[13:59:58] <hercut> je suis en su
[14:00:04] <rodinux> Sinon ul y a un soucis de export PATH
[14:00:08] <hercut> je dois quand meme remettre sudo ?
[14:00:20] <rodinux> normallement non
[14:01:17] <hercut> > <@rodinux:matrix.org> Sinon ul y a un soucis de export PATH

🤔
[14:01:17] <rodinux> tu dois faire cela
[14:01:38] <Salamandar> on avait déjà vu ce soucis de PATH
[14:01:52] <Salamandar> @hercut:matrix.org peux-tu créer un post sur le forum ? Ici on perd les infos de quelles commandes tu as lancées…
[14:02:20] <rodinux> ```
nano /root/.bashrc

```
[14:02:43] <rodinux> et ajouter en bas
```
export PATH=/sbin:/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
```
[14:02:50] <hercut> > <@Salamandar:matrix.org> on avait déjà vu ce soucis de PATH

Je ne fais que suivre votre aide, et malheureusement je ne comprend pas, donc c'est pas facile.
Je fais faire un post sur le forum
[14:03:48] <rodinux> puis
```
source /root/.bashrc
```
[14:04:19] <hercut> > <@rodinux:matrix.org> puis
> ```
> source /root/.bashrc
> ```

ok
[14:05:00] <hercut> > <@rodinux:matrix.org> puis
> ```
> source /root/.bashrc
> ```

J'ajoute ca dans le fichier ?
[14:05:18] <rodinux> oui tout en bas
[14:06:11] <rodinux> il y avait peut être une commande `export` pour qu'il l'écrive, me rappelle plus
[14:06:22] <hercut> > <@rodinux:matrix.org> il y avait peut être une commande `export` pour qu'il l'écrive, me rappelle plus

c'est fait
[14:07:39] <rodinux> bien faire le `source /root/.bashrc` et du coup que donne les commandes ou ça à bloquer
[14:08:28] <hercut> > <@rodinux:matrix.org> bien faire le `source /root/.bashrc` et du coup que donne les commandes ou ça à bloquer

attend `source /root/.bashrc` je l'ai ajouter dans le fichier

[14:08:36] <hercut> c'etait une commande ?
[14:09:06] <rodinux> non, c'est une commande pour qu'il lise les changements
[14:09:15] <rodinux> il ne doit pas être dans le fichier
[14:09:19] <hercut> ah ok donc je vais retirer la ligne :)
[14:10:43] <hercut> je relance ta commande mainteannt dpkg --configure -a
[14:10:50] <hercut> qui semble foncitonner cette fois
[14:17:14] <rodinux> après tu en était où du coup ?
[14:18:21] <hercut> > <@rodinux:matrix.org> après tu en était où du coup ?

ca mouline mais il dit ca deja :
Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
Warning: set_closure_cell(cell, cls)
[14:21:08] <rodinux> et la commande qui plantait ? `apt full-upgrade -o APT::Force-LoopBreak=1 -o Dpkg::Options::='--force-confold'`
[14:21:20] <hercut> > <@rodinux:matrix.org> et la commande qui plantait ? `apt full-upgrade -o APT::Force-LoopBreak=1 -o Dpkg::Options::='--force-confold'`

oui
[14:21:50] <hercut> > <@hercut:matrix.org> oui

mais je ne sais pas ou trouver les log, car elle etait tres longue et j'ai du quiter mon pc, et donc j'ai pas l'erreur exacte :/
[14:24:41] <hercut> > <@hercut:matrix.org> ca mouline mais il dit ca deja :
> Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> Warning: set_closure_cell(cell, cls)

Ca me refait le warning
[14:28:08] <rodinux> Que dit `yunohost tools migrations list` ?
[14:28:42] <hercut> Je coupe la commande ?
[14:28:55] <rodinux> non, peut-être pas
[14:29:37] <rodinux> j'essaie de voir le déroulement pour comprendre ce qui t'arrives...
[14:29:57] <hercut> > <@rodinux:matrix.org> j'essaie de voir le déroulement pour comprendre ce qui t'arrives...

Merci c'est gentil.
[14:30:13] <rodinux> mais mieux vaut attendre voir comment elle se termine
[14:30:22] <hercut> Mais je ne peux pas faire une second commande si une est deja lancé
[14:30:36] <hercut> > <@rodinux:matrix.org> mais mieux vaut attendre voir comment elle se termine

La ca vient de me refaire le meme warning
[14:32:11] <rodinux> on va attendre
[14:32:36] <rodinux> elle va bien se terminer même si elle échoue
[14:32:56] <rodinux> ou réussi malgré les warnings...
[14:33:10] <hercut> > <@rodinux:matrix.org> elle va bien se terminer même si elle échoue

j'ai peur ^^mais ok
[14:34:00] <rodinux> c'est plus risquer d'arrêtter en cours de route et d'avoir des dépendances cassées... je pense
[14:34:06] <hercut> Success! Configuration updated for 'yunohost'
[14:34:13] <hercut> Success! Configuration updated for 'ssl'
[14:34:19] <hercut> ca continue
[14:34:48] <rodinux> Voili, c'est mieux...
[14:42:50] <hercut> C'est long :(
[14:50:10] <rodinux> patience... c'est chronophage l'informatique... si je comprends bien tu es en train de mettre à jour ton serveur en Yunohost 12...
[14:53:40] <rodinux> Sinon une astuce pour la prochaine fois pour ne pas perdre le déroulement si jamais tu te déconnectes, c'est d'utiliser un screen. https://debian-facile.org/doc:autres:screen
[14:56:08] <rodinux> J'utilise systématiquement un screen maintenant, comme cela je peux quitter le screen me déconnecter et revenir sur le screen pour si ça avance ou si ça s'est terminé quand c'est des commandes qui vont être longues...
[14:57:50] <rodinux> Bon ça demande de connaître les raccourcis clavier, mais une fois que l'on a pris en main c'est pratique...
[15:16:26] <hercut> > <@rodinux:matrix.org> Bon ça demande de connaître les raccourcis clavier, mais une fois que l'on a pris en main c'est pratique...

Oui ca semble intéressant en effet, merci pour l'info je jetterai un oeil dessus :)
[15:30:29] <rodinux> Du coup ta mise à jour c'est bien effectuée hercut ?
[15:31:45] <hercut> > <@rodinux:matrix.org> Du coup ta mise à jour c'est bien effectuée hercut ?

Ca tourne encore ...
[15:31:47] <hercut> :'(
[15:32:17] <rodinux> bien bien, c'est un gros serveur avec beaucoup d'apps ?
[15:32:56] <hercut> > <@rodinux:matrix.org> bien bien, c'est un gros serveur avec beaucoup d'apps ?

Non pas plus que ca pourtant, peut etre une 10en d'apps
[15:33:15] <rodinux> c'est pas mal déjà ...
[15:33:23] <hercut> ah
[15:34:22] <hercut> quand je cherché a faire la maj ca disait ca :
917 upgraded, 111 newly installed, 6 to remove and 1 not upgraded.
[15:35:42] <hercut> Ca me semble enorme, pourtant je fais les maj regulierement
[15:37:08] <rodinux> Tu es bien en train de migrer ton serveur vers la version 12 ?
[15:40:12] <hercut> > <@rodinux:matrix.org> Tu es bien en train de migrer ton serveur vers la version 12 ?

a la base non, j'avais des soucis de maj, avec des erreurs, divers :/
Et je pense que j'ai du lancer la migration je ne sais pas trop comment, et comme il y avait deja des bugs, ca 'a pas aidé ...
[15:40:49] <rodinux> mais maintenant c'est le cas, non ?
[15:42:16] <hercut> > <@rodinux:matrix.org> mais maintenant c'est le cas, non ?

Et bien maintenant j'essaie surtout de retrouver mon serveur foncitonnel
[15:42:32] <hercut> avec ou sans la migration, mais comme la migration a deja commencé je crois que je n'ai pas le choix
[15:44:39] <rodinux> `yunohost tools upgrade system` déjà
[15:45:15] <hercut> J'attend que ta precedente commande finisse ...
[15:45:22] <rodinux> ce serait bien aussi de regarder cela
```
yunohost tools regen-conf ssh nginx postfix --dry-run --with-diff
```
[15:46:14] <hercut> Ah oui second souci outre mes probleme de maj, mon serveur est devenu extrement lent alors que c'est un Serveur KS-7 - Intel i3 2130 - 8Go DDR3 1333 MHZ - 2To, donc censé etre plutot rapid je pense, en tout cas je n'avais pas de soucis avant.
[15:47:08] <rodinux> > <@hercut:matrix.org> J'attend que ta precedente commande finisse ...

d'accord... bon ne t'inquiète pas je pense même que avec la maj le serveur sera plus perfirmant
[15:47:19] <rodinux> *perfirmant
[15:48:07] <rodinux> ** performant (fais chier les lettres d'effacent sur mon clavier et I et O fourchent...)
[15:48:08] <hercut> > <@rodinux:matrix.org> d'accord... bon ne t'inquiète pas je pense même que avec la maj le serveur sera plus perfirmant

j'espere qu'on y arrivera ! :)merci de ton aide
[15:48:17] <hercut>
https://matrix.to/#/!gvRsI7cG1o9SVr56:pijean.ovh/$6QH1CEO6oI0AdCHIwea0TSkG-EYPhfEsv6peirccDDw?via=matrix.org&via=aria-net.org&via=tchncs.de
[15:48:33] <hercut> > <@hercut:matrix.org> j'espere qu'on y arrivera ! :)merci de ton aide

Ca ressemble a ce que tu m'as fait faire
[15:50:51] <Seb l'e-Woke végétal> Depuis quelques jours, le service mastodon-web s’arrête sur mon Yunohost. Je constate que lorsqu’il fonctionne, il pompent beaucoup de ressources CPU. Dans les logs, je vois :
Started mastodon-web.service - mastodon-web.
mastodon-web.service: Main process exited, code=exited, status=1/FAILURE
mastodon-web.service: Failed with result 'exit-code'.
mastodon-web.service: Consumed 1.804s CPU time.
Sachant que je n’ai toujours pas accès à SSH, ¿ comment puis-je procéder pour réparer la chose ?
[15:51:24] <hercut> > <@hercut:matrix.org> Ca ressemble a ce que tu m'as fait faire

Et encore quelque echanges avec un souci de dns aussi https://matrix.to/#/!gvRsI7cG1o9SVr56:pijean.ovh/$NzHO_R3gfAwLzedKiLIgX4_J296bLij8B5dCeHvAwoQ?via=matrix.org&via=aria-net.org&via=tchncs.de
[16:04:06] <hercut> > <@rodinux:matrix.org> d'accord... bon ne t'inquiète pas je pense même que avec la maj le serveur sera plus perfirmant

```
Setting up pinentry-curses (1.2.1-1) ...
Setting up postgresql-client-common (248) ...
Setting up libtext-iconv-perl:amd64 (1.7-8) ...
Setting up libtext-charwidth-perl:amd64 (0.04-11) ...
Setting up systemd-sysv (252.31-1~deb12u1) ...
Setting up libicu72:amd64 (72.1-3) ...
Setting up linux-base (4.9) ...
Setting up gpg-agent (2.2.40-1.1) ...
Setting up libpython3.11:amd64 (3.11.2-6+deb12u3) ...
Setting up openssh-server (1:9.2p1-2+deb12u3) ...
rescue-ssh.target is a disabled or a static unit not running, not starting it.
ssh.socket is a disabled or a static unit not running, not starting it.
Setting up python3-apt (2.6.0) ...
Setting up libtdb1:amd64 (1.4.8-2) ...
Setting up btrfs-progs (6.2-1+deb12u1) ...
Setting up gpgsm (2.2.40-1.1) ...
Setting up yunohost (12.0.6) ...
Regenerating configuration, this might take a while...
Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
Warning: set_closure_cell(cell, cls)
Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
Warning: set_closure_cell(cell, cls)
Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
Warning: set_closure_cell(cell, cls)
Success! Configuration updated for 'yunohost'
Success! Configuration updated for 'ssl'
Warning: The configuration file '/etc/ldap/slapd.ldif' has been manually modified and will not be updated
Warning: The configuration file '/etc/apt/sources.list.d/extra_php_version.list' has been manually modified and will not be updated
Warning: The configuration file '/var/www/.well-known/sandbox-cryptpad.celien.link/autoconfig/mail/config-v1.1.xml' has been manually modified and will not be updated
Success! Configuration updated for 'dovecot'
Info: The configuration file '/etc/opendkim.conf' is now managed by YunoHost (category opendkim).
Success! Configuration updated for 'opendkim'
Success! Configuration updated for 'dnsmasq'
Success! Configuration updated for 'fail2ban'
Warning: rmdir: failed to remove '/var/log/yunohost/categories/operation': Directory not empty
Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
Warning: set_closure_cell(cell, cls)
Warning: Job for fail2ban.service failed.
Warning: See "systemctl status fail2ban.service" and "journalctl -xeu fail2ban.service" for details.
Error: Could not run script: /usr/share/yunohost/hooks/conf_regen/52-fail2ban
Launching migrations...
Info: Running migration 0028_delete_legacy_xmpp_permission…
Info: Creating a backup of LDAP database and apps settings prior to the actual migration.
Success! Migration 0028_delete_legacy_xmpp_permission completed
Info: Running migration 0029_postgresql_13_to_15…
Package: invidious-ynh-deps
Depends: postgresql, libssl-dev, libxml2-dev, libyaml-dev, libgmp-dev, libreadline-dev, librsvg2-bin, imagemagick, libsqlite3-dev, zlib1g-dev, libevent-dev, libpcre3-dev
--
Package: lstu-ynh-deps
Depends: build-essential, libssl-dev, zlib1g-dev, libpng-dev, libpq-dev, libpod-parser-perl, carton, memcached, postgresql
Package: lufi-ynh-deps
Depends: build-essential, libssl-dev, zlib1g-dev, libpq-dev, libio-socket-ssl-perl, liblwp-protocol-https-perl, carton, postgresql
--
Package: pixelfed-ynh-deps
Depends: postgresql, libgd3, jpegoptim, optipng, pngquant, ffmpeg, imagemagick, supervisor, php8.2-redis, php8.2-bcmath, php8.2-cli, php8.2-ctype, php8.2-curl, php8.2-exif, php8.2-gd, php8.2-iconv, php8.2-intl, php8.2-mbstring, php8.2-tokenizer, php8.2-xml, php8.2-zip, php8.2-pdo, php8.2-pgsql, php8.2-fileinfo, php8.2-imagick, redis-server, php8.2, php8.2-fpm, php8.2-common
Package: readeck-ynh-deps
Depends: postgresql
Error: Migration 0029_postgresql_13_to_15 did not complete, aborting. Error: PostgreSQL 13 is installed, but not PostgreSQL 15!? Something weird might have happened on your system :(…
Info: The operation 'Run migrations' could not be completed. Please share the full log of this operation using the command 'yunohost log share 20241115-145640-tools_migrations_migrate_forward' to get help
Info: Running migration 0030_rebuild_python_venv_in_bookworm…
Success! Migration 0030_rebuild_python_venv_in_bookworm completed
Warning: Migration 0031_terms_of_services has to be run manually. Please go to Tools → Migrations on the webadmin page, or run `yunohost tools migrations run`.
Re-diagnosing server health...
Error: Found 1 significant issue(s) (and 1 warning(s)) related to Base system!
Warning: Found 1 item(s) that could be improved for Internet connectivity.
/usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
set_closure_cell(cell, cls)
Success! Everything looks OK for DNS records! (+ 1 ignored issue(s))
Success! Everything looks OK for Ports exposure!
Error: Found 33 significant issue(s) related to Web!
Success! Everything looks OK for Email! (+ 2 ignored issue(s))
Warning: unable to retrieve string to translate with key 'ERROR: cannot import name 'MutableMapping' from 'collections' (/usr/lib/python3.11/collections/__init__.py)' for default locale 'locales/en.json' file (don't panic this is just a warning)
Error: Found 1 significant issue(s) (and 1 warning(s)) related to Services status check!
Success! Everything looks OK for System resources!
Warning: Found 1 item(s) that could be improved for System configurations.
Success! Everything looks OK for Applications!
Warning: To see the issues found, you can go to the Diagnosis section of the webadmin, or run 'yunohost diagnosis show --issues --human-readable' from the command-line.
Refreshing app catalog...
Info: Updating application catalog…
Success! The application catalog has been updated!
Error: Command '['git', 'ls-remote', '--symref', 'https://github.com/YunoHost-Apps/invidious_ynh', 'HEAD']' returned non-zero exit status 128.
Error: Could not fetch source files, is the URL correct?
Setting up less (590-2.1~deb12u2) ...
Setting up perl-openssl-defaults:amd64 (7+b1) ...
Setting up linux-libc-dev:amd64 (6.1.115-1) ...
Setting up xkb-data (2.35.1-1) ...
Setting up kmod (30+20221128-1) ...
Installing new version of config file /etc/init.d/kmod ...
Setting up bzip2 (1.0.8-5+b1) ...
Setting up libtext-wrapi18n-perl (0.06-10) ...
Setting up libpcre2-16-0:amd64 (10.42-1) ...
Setting up libtalloc2:amd64 (2.4.0-f2) ...
Setting up busybox (1:1.35.0-4+b3) ...
Setting up libklibc:amd64 (2.0.12-1) ...
Setting up libpcre2-32-0:amd64 (10.42-1) ...
Setting up libtirpc-dev:amd64 (1.3.3+ds-1) ...
Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
Setting up libtevent0:amd64 (0.14.1-1) ...
Setting up gnupg-l10n (2.2.40-1.1) ...
Setting up libiptc0:amd64 (1.8.9-2) ...
Setting up libsocket6-perl (0.29-3) ...
Setting up ifupdown (0.8.41) ...
Installing new version of config file /etc/init.d/networking ...
ifupdown.postinst: Warning: /etc/network/interfaces does not exist
Setting up debconf-utils (1.5.82) ...
Setting up udev (252.31-1~deb12u1) ...
Setting up util-linux (2.38.1-5+deb12u2) ...
fstrim.timer is a disabled or a static unit not running, not starting it.
fstrim.service is a disabled or a static unit not running, not starting it.
Setting up libjs-sphinxdoc (5.3.0-4) ...
Setting up libfdisk1:amd64 (2.38.1-5+deb12u2) ...
Setting up libpcre2-posix3:amd64 (10.42-1) ...
Setting up libgssapi-perl (0.28-4+b1) ...
Setting up mount (2.38.1-5+deb12u2) ...
Setting up libcrypt-dev:amd64 (1:4.4.33-2) ...
Setting up dbus-session-bus-common (1.14.10-1~deb12u1) ...
Setting up libhtml-parser-perl:amd64 (3.81-1) ...
Setting up libjson-perl (4.10000-1) ...
Setting up libfcgi-perl (0.82+ds-2) ...
Setting up kbd (2.5.1-1+b1) ...
Setting up libterm-readkey-perl (2.38-2+b1) ...
Setting up dbus-system-bus-common (1.14.10-1~deb12u1) ...
Setting up libc-dev-bin (2.36-9+deb12u9) ...
Setting up klibc-utils (2.0.12-1) ...
Setting up libldb2:amd64 (2:2.6.2+samba4.17.12+dfsg-0+deb12u1) ...
Setting up rspamd (3.4-1) ...
Installing new version of config file /etc/rspamd/composites.conf ...
Installing new version of config file /etc/rspamd/modules.d/rbl.conf ...
Installing new version of config file /etc/rspamd/scores.d/rbl_group.conf ...
Installing new version of config file /etc/rspamd/scores.d/whitelist_group.conf ...
Installing new version of config file /etc/rspamd/statistic.conf ...
Setting up dbus-bin (1.14.10-1~deb12u1) ...
Setting up liblocale-gettext-perl (1.07-5) ...
Setting up sqlite3 (3.40.1-2+deb12u1) ...
Setting up gpg (2.2.40-1.1) ...
Setting up libdbi-perl:amd64 (1.643-4) ...
Setting up python3-systemd (235-1+b2) ...
Setting up gnupg-utils (2.2.40-1.1) ...
Setting up libnet-ssleay-perl:amd64 (1.92-2+b1) ...
Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
Setting up gpg-wks-client (2.2.40-1.1) ...
Setting up python3-talloc:amd64 (2.4.0-f2) ...
Setting up debconf-i18n (1.5.82) ...
Setting up dbus-daemon (1.14.10-1~deb12u1) ...
Setting up fdisk (2.38.1-5+deb12u2) ...
Setting up dbus (1.14.10-1~deb12u1) ...
A reboot is required to replace the running dbus-daemon.
Please reboot the system when convenient.
dbus.service is a disabled or a static unit, not starting it.
Setting up postgresql-common (248) ...
Replacing config file /etc/postgresql-common/createcluster.conf with new version
Setting up python3-ldb (2:2.6.2+samba4.17.12+dfsg-0+deb12u1) ...
Setting up libdbd-mysql-perl:amd64 (4.050-5+b1) ...
Setting up gpg-wks-server (2.2.40-1.1) ...
Setting up gnupg (2.2.40-1.1) ...
Setting up libpam-systemd:amd64 (252.31-1~deb12u1) ...
Setting up libc6-dev:amd64 (2.36-9+deb12u9) ...
Setting up keyboard-configuration (1.221) ...
Setting up initramfs-tools-core (0.142+deb12u1) ...
Installing new version of config file /etc/initramfs-tools/initramfs.conf ...
Setting up libncurses-dev:amd64 (6.4-4) ...
Setting up initramfs-tools (0.142+deb12u1) ...
update-initramfs: deferring update (trigger activated)
Setting up libpcre2-dev:amd64 (10.42-1) ...
Setting up libreadline-dev:amd64 (8.2-1.3) ...
Setting up libexpat1-dev:amd64 (2.5.0-1+deb12u1) ...
Setting up libsqlite3-dev:amd64 (3.40.1-2+deb12u1) ...
Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
Setting up console-setup-linux (1.221) ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-1.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-13.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-14.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-15.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-2.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-3.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-4.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-7.inc ...
Installing new version of config file /etc/console-setup/compose.ISO-8859-9.inc ...
Installing new version of config file /etc/console-setup/compose.KOI8-R.inc ...
Installing new version of config file /etc/console-setup/compose.KOI8-U.inc ...
Installing new version of config file /etc/console-setup/compose.VISCII.inc ...
Installing new version of config file /etc/init.d/console-setup.sh ...
Installing new version of config file /etc/init.d/keyboard-setup.sh ...
Setting up console-setup (1.221) ...
Setting up libpython3.11-dev:amd64 (3.11.2-6+deb12u3) ...
Setting up libpython3-dev:amd64 (3.11.2-1+b1) ...
Setting up python3.11-dev (3.11.2-6+deb12u3) ...
Setting up python3-dev (3.11.2-1+b1) ...
Processing triggers for nginx (1.22.1-9) ...
Triggering nginx reload ...
invoke-rc.d: policy-rc.d denied execution of reload.
Processing triggers for libc-bin (2.36-9+deb12u8) ...
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for ca-certificates (20230311) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...

done.
done.
Processing triggers for mailcap (3.69) ...
Processing triggers for initramfs-tools (0.142+deb12u1) ...
update-initramfs: Generating /boot/initrd.img-4.19-ovh-xxxx-std-ipv6-64
W: No zstd in /usr/bin:/sbin:/bin, using gzip
depmod: WARNING: could not open modules.builtin.modinfo at /var/tmp/mkinitramfs_3UwLyq/lib/modules/4.19-ovh-xxxx-std-ipv6-64: No such file or directory
```
[16:04:35] <hercut> C'est fini :)
[16:04:45] <rodinux> > <@hercut:matrix.org> ```
> Setting up pinentry-curses (1.2.1-1) ...
> Setting up postgresql-client-common (248) ...
> Setting up libtext-iconv-perl:amd64 (1.7-8) ...
> Setting up libtext-charwidth-perl:amd64 (0.04-11) ...
> Setting up systemd-sysv (252.31-1~deb12u1) ...
> Setting up libicu72:amd64 (72.1-3) ...
> Setting up linux-base (4.9) ...
> Setting up gpg-agent (2.2.40-1.1) ...
> Setting up libpython3.11:amd64 (3.11.2-6+deb12u3) ...
> Setting up openssh-server (1:9.2p1-2+deb12u3) ...
> rescue-ssh.target is a disabled or a static unit not running, not starting it.
> ssh.socket is a disabled or a static unit not running, not starting it.
> Setting up python3-apt (2.6.0) ...
> Setting up libtdb1:amd64 (1.4.8-2) ...
> Setting up btrfs-progs (6.2-1+deb12u1) ...
> Setting up gpgsm (2.2.40-1.1) ...
> Setting up yunohost (12.0.6) ...
> Regenerating configuration, this might take a while...
> Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> Warning: set_closure_cell(cell, cls)
> Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> Warning: set_closure_cell(cell, cls)
> Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> Warning: set_closure_cell(cell, cls)
> Success! Configuration updated for 'yunohost'
> Success! Configuration updated for 'ssl'
> Warning: The configuration file '/etc/ldap/slapd.ldif' has been manually modified and will not be updated
> Warning: The configuration file '/etc/apt/sources.list.d/extra_php_version.list' has been manually modified and will not be updated
> Warning: The configuration file '/var/www/.well-known/sandbox-cryptpad.celien.link/autoconfig/mail/config-v1.1.xml' has been manually modified and will not be updated
> Success! Configuration updated for 'dovecot'
> Info: The configuration file '/etc/opendkim.conf' is now managed by YunoHost (category opendkim).
> Success! Configuration updated for 'opendkim'
> Success! Configuration updated for 'dnsmasq'
> Success! Configuration updated for 'fail2ban'
> Warning: rmdir: failed to remove '/var/log/yunohost/categories/operation': Directory not empty
> Warning: /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> Warning: set_closure_cell(cell, cls)
> Warning: Job for fail2ban.service failed.
> Warning: See "systemctl status fail2ban.service" and "journalctl -xeu fail2ban.service" for details.
> Error: Could not run script: /usr/share/yunohost/hooks/conf_regen/52-fail2ban
> Launching migrations...
> Info: Running migration 0028_delete_legacy_xmpp_permission…
> Info: Creating a backup of LDAP database and apps settings prior to the actual migration.
> Success! Migration 0028_delete_legacy_xmpp_permission completed
> Info: Running migration 0029_postgresql_13_to_15…
> Package: invidious-ynh-deps
> Depends: postgresql, libssl-dev, libxml2-dev, libyaml-dev, libgmp-dev, libreadline-dev, librsvg2-bin, imagemagick, libsqlite3-dev, zlib1g-dev, libevent-dev, libpcre3-dev
> --
> Package: lstu-ynh-deps
> Depends: build-essential, libssl-dev, zlib1g-dev, libpng-dev, libpq-dev, libpod-parser-perl, carton, memcached, postgresql
> Package: lufi-ynh-deps
> Depends: build-essential, libssl-dev, zlib1g-dev, libpq-dev, libio-socket-ssl-perl, liblwp-protocol-https-perl, carton, postgresql
> --
> Package: pixelfed-ynh-deps
> Depends: postgresql, libgd3, jpegoptim, optipng, pngquant, ffmpeg, imagemagick, supervisor, php8.2-redis, php8.2-bcmath, php8.2-cli, php8.2-ctype, php8.2-curl, php8.2-exif, php8.2-gd, php8.2-iconv, php8.2-intl, php8.2-mbstring, php8.2-tokenizer, php8.2-xml, php8.2-zip, php8.2-pdo, php8.2-pgsql, php8.2-fileinfo, php8.2-imagick, redis-server, php8.2, php8.2-fpm, php8.2-common
> Package: readeck-ynh-deps
> Depends: postgresql
> Error: Migration 0029_postgresql_13_to_15 did not complete, aborting. Error: PostgreSQL 13 is installed, but not PostgreSQL 15!? Something weird might have happened on your system :(…
> Info: The operation 'Run migrations' could not be completed. Please share the full log of this operation using the command 'yunohost log share 20241115-145640-tools_migrations_migrate_forward' to get help
> Info: Running migration 0030_rebuild_python_venv_in_bookworm…
> Success! Migration 0030_rebuild_python_venv_in_bookworm completed
> Warning: Migration 0031_terms_of_services has to be run manually. Please go to Tools → Migrations on the webadmin page, or run `yunohost tools migrations run`.
> Re-diagnosing server health...
> Error: Found 1 significant issue(s) (and 1 warning(s)) related to Base system!
> Warning: Found 1 item(s) that could be improved for Internet connectivity.
> /usr/lib/python3/dist-packages/attr/_make.py:778: RuntimeWarning: Running interpreter doesn't sufficiently support code object introspection. Some features like bare super() or accessing __class__ will not work with slotted classes.
> set_closure_cell(cell, cls)
> Success! Everything looks OK for DNS records! (+ 1 ignored issue(s))
> Success! Everything looks OK for Ports exposure!
> Error: Found 33 significant issue(s) related to Web!
> Success! Everything looks OK for Email! (+ 2 ignored issue(s))
> Warning: unable to retrieve string to translate with key 'ERROR: cannot import name 'MutableMapping' from 'collections' (/usr/lib/python3.11/collections/__init__.py)' for default locale 'locales/en.json' file (don't panic this is just a warning)
> Error: Found 1 significant issue(s) (and 1 warning(s)) related to Services status check!
> Success! Everything looks OK for System resources!
> Warning: Found 1 item(s) that could be improved for System configurations.
> Success! Everything looks OK for Applications!
> Warning: To see the issues found, you can go to the Diagnosis section of the webadmin, or run 'yunohost diagnosis show --issues --human-readable' from the command-line.
> Refreshing app catalog...
> Info: Updating application catalog…
> Success! The application catalog has been updated!
> Error: Command '['git', 'ls-remote', '--symref', 'https://github.com/YunoHost-Apps/invidious_ynh', 'HEAD']' returned non-zero exit status 128.
> Error: Could not fetch source files, is the URL correct?
> Setting up less (590-2.1~deb12u2) ...
> Setting up perl-openssl-defaults:amd64 (7+b1) ...
> Setting up linux-libc-dev:amd64 (6.1.115-1) ...
> Setting up xkb-data (2.35.1-1) ...
> Setting up kmod (30+20221128-1) ...
> Installing new version of config file /etc/init.d/kmod ...
> Setting up bzip2 (1.0.8-5+b1) ...
> Setting up libtext-wrapi18n-perl (0.06-10) ...
> Setting up libpcre2-16-0:amd64 (10.42-1) ...
> Setting up libtalloc2:amd64 (2.4.0-f2) ...
> Setting up busybox (1:1.35.0-4+b3) ...
> Setting up libklibc:amd64 (2.0.12-1) ...
> Setting up libpcre2-32-0:amd64 (10.42-1) ...
> Setting up libtirpc-dev:amd64 (1.3.3+ds-1) ...
> Setting up libgmpxx4ldbl:amd64 (2:6.2.1+dfsg1-1.1) ...
> Setting up libtevent0:amd64 (0.14.1-1) ...
> Setting up gnupg-l10n (2.2.40-1.1) ...
> Setting up libiptc0:amd64 (1.8.9-2) ...
> Setting up libsocket6-perl (0.29-3) ...
> Setting up ifupdown (0.8.41) ...
> Installing new version of config file /etc/init.d/networking ...
> ifupdown.postinst: Warning: /etc/network/interfaces does not exist
> Setting up debconf-utils (1.5.82) ...
> Setting up udev (252.31-1~deb12u1) ...
> Setting up util-linux (2.38.1-5+deb12u2) ...
> fstrim.timer is a disabled or a static unit not running, not starting it.
> fstrim.service is a disabled or a static unit not running, not starting it.
> Setting up libjs-sphinxdoc (5.3.0-4) ...
> Setting up libfdisk1:amd64 (2.38.1-5+deb12u2) ...
> Setting up libpcre2-posix3:amd64 (10.42-1) ...
> Setting up libgssapi-perl (0.28-4+b1) ...
> Setting up mount (2.38.1-5+deb12u2) ...
> Setting up libcrypt-dev:amd64 (1:4.4.33-2) ...
> Setting up dbus-session-bus-common (1.14.10-1~deb12u1) ...
> Setting up libhtml-parser-perl:amd64 (3.81-1) ...
> Setting up libjson-perl (4.10000-1) ...
> Setting up libfcgi-perl (0.82+ds-2) ...
> Setting up kbd (2.5.1-1+b1) ...
> Setting up libterm-readkey-perl (2.38-2+b1) ...
> Setting up dbus-system-bus-common (1.14.10-1~deb12u1) ...
> Setting up libc-dev-bin (2.36-9+deb12u9) ...
> Setting up klibc-utils (2.0.12-1) ...
> Setting up libldb2:amd64 (2:2.6.2+samba4.17.12+dfsg-0+deb12u1) ...
> Setting up rspamd (3.4-1) ...
> Installing new version of config file /etc/rspamd/composites.conf ...
> Installing new version of config file /etc/rspamd/modules.d/rbl.conf ...
> Installing new version of config file /etc/rspamd/scores.d/rbl_group.conf ...
> Installing new version of config file /etc/rspamd/scores.d/whitelist_group.conf ...
> Installing new version of config file /etc/rspamd/statistic.conf ...
> Setting up dbus-bin (1.14.10-1~deb12u1) ...
> Setting up liblocale-gettext-perl (1.07-5) ...
> Setting up sqlite3 (3.40.1-2+deb12u1) ...
> Setting up gpg (2.2.40-1.1) ...
> Setting up libdbi-perl:amd64 (1.643-4) ...
> Setting up python3-systemd (235-1+b2) ...
> Setting up gnupg-utils (2.2.40-1.1) ...
> Setting up libnet-ssleay-perl:amd64 (1.92-2+b1) ...
> Setting up libgmp-dev:amd64 (2:6.2.1+dfsg1-1.1) ...
> Setting up gpg-wks-client (2.2.40-1.1) ...
> Setting up python3-talloc:amd64 (2.4.0-f2) ...
> Setting up debconf-i18n (1.5.82) ...
> Setting up dbus-daemon (1.14.10-1~deb12u1) ...
> Setting up fdisk (2.38.1-5+deb12u2) ...
> Setting up dbus (1.14.10-1~deb12u1) ...
> A reboot is required to replace the running dbus-daemon.
> Please reboot the system when convenient.
> dbus.service is a disabled or a static unit, not starting it.
> Setting up postgresql-common (248) ...
> Replacing config file /etc/postgresql-common/createcluster.conf with new version
> Setting up python3-ldb (2:2.6.2+samba4.17.12+dfsg-0+deb12u1) ...
> Setting up libdbd-mysql-perl:amd64 (4.050-5+b1) ...
> Setting up gpg-wks-server (2.2.40-1.1) ...
> Setting up gnupg (2.2.40-1.1) ...
> Setting up libpam-systemd:amd64 (252.31-1~deb12u1) ...
> Setting up libc6-dev:amd64 (2.36-9+deb12u9) ...
> Setting up keyboard-configuration (1.221) ...
> Setting up initramfs-tools-core (0.142+deb12u1) ...
> Installing new version of config file /etc/initramfs-tools/initramfs.conf ...
> Setting up libncurses-dev:amd64 (6.4-4) ...
> Setting up initramfs-tools (0.142+deb12u1) ...
> update-initramfs: deferring update (trigger activated)
> Setting up libpcre2-dev:amd64 (10.42-1) ...
> Setting up libreadline-dev:amd64 (8.2-1.3) ...
> Setting up libexpat1-dev:amd64 (2.5.0-1+deb12u1) ...
> Setting up libsqlite3-dev:amd64 (3.40.1-2+deb12u1) ...
> Setting up zlib1g-dev:amd64 (1:1.2.13.dfsg-1) ...
> Setting up console-setup-linux (1.221) ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-1.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-13.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-14.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-15.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-2.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-3.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-4.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-7.inc ...
> Installing new version of config file /etc/console-setup/compose.ISO-8859-9.inc ...
> Installing new version of config file /etc/console-setup/compose.KOI8-R.inc ...
> Installing new version of config file /etc/console-setup/compose.KOI8-U.inc ...
> Installing new version of config file /etc/console-setup/compose.VISCII.inc ...
> Installing new version of config file /etc/init.d/console-setup.sh ...
> Installing new version of config file /etc/init.d/keyboard-setup.sh ...
> Setting up console-setup (1.221) ...
> Setting up libpython3.11-dev:amd64 (3.11.2-6+deb12u3) ...
> Setting up libpython3-dev:amd64 (3.11.2-1+b1) ...
> Setting up python3.11-dev (3.11.2-6+deb12u3) ...
> Setting up python3-dev (3.11.2-1+b1) ...
> Processing triggers for nginx (1.22.1-9) ...
> Triggering nginx reload ...
> invoke-rc.d: policy-rc.d denied execution of reload.
> Processing triggers for libc-bin (2.36-9+deb12u8) ...
> Processing triggers for man-db (2.9.4-2) ...
> Processing triggers for ca-certificates (20230311) ...
> Updating certificates in /etc/ssl/certs...
> 0 added, 0 removed; done.
> Running hooks in /etc/ca-certificates/update.d...
>
> done.
> done.
> Processing triggers for mailcap (3.69) ...
> Processing triggers for initramfs-tools (0.142+deb12u1) ...
> update-initramfs: Generating /boot/initrd.img-4.19-ovh-xxxx-std-ipv6-64
> W: No zstd in /usr/bin:/sbin:/bin, using gzip
> depmod: WARNING: could not open modules.builtin.modinfo at /var/tmp/mkinitramfs_3UwLyq/lib/modules/4.19-ovh-xxxx-std-ipv6-64: No such file or directory
> ```

Ah zut ! ton soucis est que tu es sur un kernel ancien de OVJ
[16:04:47] <rodinux> de OVH !
[16:04:48] <rodinux> update-initramfs: Generating /boot/initrd.img-4.19-ovh-xxxx-std-ipv6-64
[16:04:58] <hercut> bash: update-initramfs:: command not found
[16:05:17] <rodinux> C'est quelle gamme de VPS chez OVH ?
[16:05:37] <hercut> Serveur KS-7 - Intel i3 2130 - 8Go DDR3 1333 MHZ - 2To
[16:05:47] <hercut> ce n'est pas un vps
[16:06:56] <hercut> > <@rodinux:matrix.org> Ah zut ! ton soucis est que tu es sur un kernel ancien de OVJ

c'est donc une sorte d'incompatibilité entre younohost et mon serveur ?
[16:08:00] <rodinux> Il faut voir si tu peux mettre à jour ton VPS de OVH car là c'est un fichtre vieux kernel !
[16:08:32] <rodinux> C'est un serveur VPS mutulaisé ou un serveur dédié ?
[16:09:01] <hercut> > <@rodinux:matrix.org> C'est un serveur VPS mutulaisé ou un serveur dédié ?

un dedié, c'est un kimsufi
[16:09:38] <rodinux> Ah, alors c'est juste des configs
[16:10:56] <hercut> > <@rodinux:matrix.org> Ah, alors c'est juste des configs

Ok, ca me semble rassurant quand tu dis ca ^^
[16:13:18] <rodinux> déjà `cat /etc/apt/sources.list`
[16:14:21] <hercut> deb-src http://debian.mirrors.ovh.net/debian bookworm-updates main

[16:14:54] <lps> Test
[16:15:01] <rodinux> sérieux ?? il n'y a que cette ligne ici ?
[16:15:23] <lps> Hi, I'm trying to get prestashop up and running but getting a warning that memory limit should be 256m ... Which php.ini should I be modifying? I've changed what I've found, but I'm still presented with this error
[16:15:42] <hercut> > <@rodinux:matrix.org> sérieux ?? il n'y a que cette ligne ici ?

pardon
[16:15:49] <hercut> ```
#



deb http://debian.mirrors.ovh.net/debian bookworm main
deb-src http://debian.mirrors.ovh.net/debian bookworm main

deb http://security.debian.org/debian-security bookworm-security main
deb-src http://security.debian.org/debian-security bookworm-security main

# bookworm-updates, previously known as 'volatile'
deb http://debian.mirrors.ovh.net/debian bookworm-updates main
deb-src http://debian.mirrors.ovh.net/debian bookworm-updates main
```
[16:16:16] <hercut> comme je suis en su, les ligne sont moins visible
[16:18:40] <rodinux> C'est mieux d'éditer ces lignes avec les dépôts sources de debian...
[16:18:55] <rodinux> ```
deb http://deb.debian.org/debian/ bookworm main non-free-firmware
deb-src http://deb.debian.org/debian/ bookworm main non-free-firmware

deb http://security.debian.org/debian-security bookworm-security main non-free-firmware
deb-src http://security.debian.org/debian-security bookworm-security main non-free-firmware

# bookworm-updates, to get updates before a point release is made;
# see https://www.debian.org/doc/manuals/debian-reference/ch02.en.html#_updates_and_backports
deb http://deb.debian.org/debian/ bookworm-updates main non-free-firmware
deb-src http://deb.debian.org/debian/ bookworm-updates main non-free-firmware
[16:19:24] <hercut> > <@rodinux:matrix.org> C'est mieux d'éditer ces lignes avec les dépôts sources de debian...

je ne comprend pas :/
[16:22:27] <rodinux> là il regarde le dépôt des paquets de ovh, je ne pense pas ce soit une bonne idée... j'espère pas dire de bêtises, j'ai aussi un serveur dédié kimsufi mais j'ai mis ces dépôts
[16:23:31] <hercut> ah ok je comprend
[16:23:56] <hercut> il faudrait que j'edit sources.list
[16:25:55] <rodinux> remplacer `debian.mirrors.ovh` par `deb.debian.org`
[16:27:17] <hercut> je dois faire `nano /etc/apt/sources.list` c'est ca ?
[16:28:21] <rodinux> ouais...
[16:28:55] <hercut> ah tu semble perplexe :)
[16:30:00] <hercut> toi tu as ajouté "non-free-firmware"
[16:33:49] <rodinux> attends... je vois un topic à ce sujet...
[16:34:02] <rodinux> que renvoi `uname -a`
[16:35:04] <hercut> Linux ndd.cloud 4.19.62-mod-std-ipv6-64-rescue #828825 SMP Tue Jul 30 13:54:49 UTC 2019 x86\_64 GNU/Linux

[16:38:14] <hercut> https://forum.yunohost.org/t/solved-installation-retry/816/7
[16:38:23] <hercut> je v ois qu'il recommande comme toi de changer les repos
[16:41:43] <rodinux> Moi je ferai cela, changer les dépôts, puis

```
apt update
yunohost tools update
yunohost tools upgrade system
update grub
yunohost tools reboot
```
[16:42:32] <rodinux> sans nano
[16:42:32] <rodinux> oui
[16:42:32] <hercut> il y a un moyen en nana de selection et remplacer rapidement ?
[16:42:46] <hercut> ?
[16:45:21] <rodinux> `sed -i 's/debian.mirrors.ovh/deb.debian.org/g' /etc/apt/sources.list`
[16:47:47] <hercut> > <@rodinux:matrix.org> `sed -i 's/debian.mirrors.ovh/deb.debian.org/g' /etc/apt/sources.list`

ok fait
[16:48:18] <rodinux> `apt update`
[16:48:27] <hercut> > <@rodinux:matrix.org> Moi je ferai cela, changer les dépôts, puis
>
> ```
> apt update
> yunohost tools update
> yunohost tools upgrade system
> update grub
> yunohost tools reboot
> ```

yes je lance ca :)
[16:51:22] <hercut> ```
735 packages can be upgraded. Run 'apt list --upgradable' to see them.
W: https://last-public-ovh-kernel.snap.mirrors.ovh.net/debian/dists/ovhkernel/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
```
[16:53:31] <rodinux> essaye cela
```
cd /etc/apt
cp trusted.gpg trusted.gpg.d
apt update
```
[16:56:51] <rodinux> ah, qu'est-ce que tu as ici ?
```
ls /etc/apt/sources.list.d/
```
[16:57:58] <hercut> > <@rodinux:matrix.org> ah, qu'est-ce que tu as ici ?
> ```
> ls /etc/apt/sources.list.d/
> ```

Je te dis ca des que la commande precedente fini
[17:05:39] <hercut> > <@rodinux:matrix.org> essaye cela
> ```
> cd /etc/apt
> cp trusted.gpg trusted.gpg.d
> apt update
> ```

```
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://security.debian.org/debian-security bookworm-security InRelease
Hit:4 http://download.opensuse.org/repositories/devel:/languages:/crystal/Debian_11 InRelease
Hit:6 https://last-public-ovh-kernel.snap.mirrors.ovh.net/debian ovhkernel InRelease
Hit:5 https://forge.yunohost.org/debian bookworm InRelease
Hit:7 https://dl.yarnpkg.com/debian stable InRelease
Hit:8 https://packages.sury.org/php bookworm InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
735 packages can be upgraded. Run 'apt list --upgradable' to see them.
```
[17:05:40] <hercut> > <@hercut:matrix.org> Je te dis ca des que la commande precedente fini

`crystal.list extra_php_version.list ovhkernel.list yarn.list yunohost.list`

[17:05:45] <rodinux> cat /etc/apt/sources.list.d/ovhkernel.list
[17:06:43] <hercut> ```
# This repository contains OVH kernels as Debian package.

# These can be installed along the distribution's default kernel,

# in which case you have to choose which kernel to boot either by

# setting GRUB\_DEFAULT in /etc/default/grub, or by using the

# 'grub-reboot' command.

deb https://last-public-ovh-kernel.snap.mirrors.ovh.net/debian/ ovhkernel main
```
[17:12:13] <rodinux> `cat /etc/default/grub`
[17:12:46] <rodinux> je regarde bien, car il ne faudrait pas que le serveur n'arrive pas a rebooter sur le grub...
[17:12:49] <hercut> > <@rodinux:matrix.org> `cat /etc/default/grub`

```
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="noquiet nosplash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
root@jbv:/etc/apt#
```

[17:14:24] <rodinux> `dpkg -l | grep linux-image`
[17:16:21] <hercut> ii linux-image-4.19-ovh-xxxx-std-ipv6-64 4.19-ovh-xxxx-std-ipv6-64-2984189 amd64 Linux kernel, version 4.19-ovh-xxxx-std-ipv6-64
[17:24:18] <rodinux> bon, je lis beaucoup de sujets, je tenterais tout de même de commenter la ligne dans le fichier `ovhkernel.list` en mettant un `#` puis une mise à jour
[17:25:43] <rodinux> C'est pas normal d'avoir un kernel en `4.19` ni sur une debian 11 encore moins sur une debian 12
[17:26:20] <hercut> :/
[17:26:58] <rodinux> par contre il faut être sûr après que le grub va bien trouver le kernel...
[17:27:31] <hercut> Ca fait plus de 4ans que j'ai mon serveur avec yht dessus, peut etre pour ca
[17:27:44] <denisapain> heyo! I'm trying to make a chibisafe app for yunohost, but im getting a really confusing error

```
Info: INFO - [++..................] > --message=Installing dependencies...
Info: DEBUG - + ynh_exec_warn_less ynh_install_nodejs --nodejs_version=20
Info: WARNING - ./install: line 32: ynh_exec_warn_less: command not found
Info: DEBUG - + ynh_exit_properly
Warning: Removing the app after installation failure…
```

I see a bit of apps using "ynh\_exec\_warn\_less" so I'm not sure why it isn't working for me.

My install script is here https://git.qilk.de/denis/chibisafe\_ynh/src/branch/master/scripts/install
[17:27:45] <hercut> > <@rodinux:matrix.org> par contre il faut être sûr après que le grub va bien trouver le kernel...

Je ne sais pas ce que c'est :(
[17:28:14] <hercut> > <@hercut:matrix.org> Je ne sais pas ce que c'est :(

Faut me tenir la main et me dire quoi faire ^^:/
[17:36:40] <rodinux> Je ne veux compliquer trop non plus, peut-être que le kernel peut suffire, tant pis que donne une upgrade
[17:36:58] <hercut> rodinux: Je vois l'heure, merci beaucoup d'avoir pris du temps pour m'aider, c'est vraiment tres sympa !
Je reprendrais la reparation lundi, en esperant pouvoir te croiser afin de reussir a finir :D
[17:37:22] <hercut> > <@rodinux:matrix.org> Je ne veux compliquer trop non plus, peut-être que le kernel peut suffire, tant pis que donne une upgrade

Je vais peut-etre pas lancer si je pars ?
[17:37:43] <cress1> Bonjour! Je viens d'installer yuno sur un VPS Hetzner, mais lors de la création du premier compte administrateur sur la première page, je clique sur Suivant et rien ne se passe. J'ai essayé de reboot le serveur, et rien non plus. Avez-vous connaissance de ce problème ? Merci !
[17:37:52] <denisapain> deleted: I posted in the wrong room
[17:38:17] <rodinux> > <@hercut:matrix.org> rodinux: Je vois l'heure, merci beaucoup d'avoir pris du temps pour m'aider, c'est vraiment tres sympa !
> Je reprendrais la reparation lundi, en esperant pouvoir te croiser afin de reussir a finir :D

essaye de faire une upgrade tout de même...
[17:38:32] <hercut> > <@rodinux:matrix.org> essaye de faire une upgrade tout de même...

Je lance la commande seul ?
[17:38:50] <rodinux> yunohost tools upgrade system
[17:38:57] <rodinux> c'est mieux...
[17:41:12] <cress1> > <@cress1:tedomum.net> Bonjour! Je viens d'installer yuno sur un VPS Hetzner, mais lors de la création du premier compte administrateur sur la première page, je clique sur Suivant et rien ne se passe. J'ai essayé de reboot le serveur, et rien non plus. Avez-vous connaissance de ce problème ? Merci !

J'essaie de faire la post-installation directement sur l'interface web, pas par le terminal
[17:41:43] <Cam✨> > <@cress1:tedomum.net> J'essaie de faire la post-installation directement sur l'interface web, pas par le terminal

depuis le terminal ça fonctionne pas?
[17:41:56] <cress1> Pas encore essayé, mais je vais. Juste je m'interrogeais de pourquoi ça ne marchait pas sur l'ide..
[17:42:37] <hercut> > <@rodinux:matrix.org> yunohost tools upgrade system

```
Info: Upgrading packages…
Info: Upgrading system packages
Info: + Reading package lists...
Info: + Building dependency tree...
Info: + Reading state information...
Info: + Correcting dependencies... Done
Info: + Calculating upgrade...
Info: + The following packages were automatically installed and are no longer required:
Info: + g++-10 glib-networking glib-networking-common glib-networking-services
Info: + gsettings-desktop-schemas guile-2.2-libs libabsl20200923 libaom0
Info: + libatk1.0-data libavcodec58 libavdevice58 libavfilter7 libavformat58
Info: + libavif9 libavresample4 libavutil56 libbpf0 libcbor0 libcodec2-0.9 libdav1d4
Info: + libdns-export1110 libexpat1-dev libfl2 libflac8 libgav1-0 libilmbase25
Info: + libisc-export1105 libjs-sphinxdoc libjs-underscore libjson-glib-1.0-0
Info: + libjson-glib-1.0-common libjsoncpp24 liblua5.1-0 libmpdec3 libnet-ip-perl
Info: + libodbc1 libodbccr2 libopenexr25 libopts25 libperl5.32 libpostproc55
Info: + libprocps8 libproxy1v5 libpython3-dev libpython3.11-dev libpython3.9
Info: + libpython3.9-dev libpython3.9-minimal libpython3.9-stdlib librest-0.7-0
Info: + libsgutils2-2 libsoup-gnome2.4-1 libsoup2.4-1 libsoup2.4-common
Info: + libsrt1.4-gnutls libstdc++-10-dev libswresample3 libswscale5 libtiff5
Info: + libusb-0.1-4 libvpx6 libwavpack1 libwebp6 libwmf-0.2-7 libwmf0.2-7 libwoff1
Info: + libx264-160 libx265-192 lua-bitop lua-event lua-expat lua-ldap lua-rex-pcre
Info: + lua-sec lua-zlib lua5.3 mariadb-server-10.5 metronome perl-modules-5.32
Info: + php-mbstring php-php-gettext php7.0-mbstring php7.4-curl php7.4-intl
Info: + php7.4-ldap php7.4-mbstring php7.4-mysql php8.0-mbstring php8.1-mbstring
Info: + python-pip-whl python3-appdirs python3-dev python3-future python3-ldb
Info: + python3-pip python3-pyparsing python3-talloc python3-wheel python3.11-dev
Info: + python3.9 python3.9-dev python3.9-minimal
Info: + Use 'apt autoremove' to remove them.
Info: + The following packages will be REMOVED:
Info: + libgsasl7 libmailutils7 mariadb-client-10.5 mariadb-client-core-10.5
Info: + mariadb-server-core-10.5
Info: + The following NEW packages will be installed:
Info: + at-spi2-common cpp-12 cron-daemon-common g++-12 gcc-11-base gcc-12
Info: + guile-3.0-libs libabsl20220623 libaom3 libasan8 libavcodec59 libavdevice59
Info: + libavfilter8 libavformat59 libavif15 libavutil57 libc++1-16 libc++abi1-16
Info: + libcjson1 libclone-perl libcodec2-1.0 libdav1d6 libdaxctl1 libdecor-0-0
Info: + libflac12 libgav1-1 libgcc-12-dev libgsasl18 libgssglue1 libharfbuzz-subset0
Info: + libhwy1 libidn12 libimath-3-1-29 libjxl0.7 liblerc4 libllvm14 libllvm15
Info: + liblua5.4-0 libmailutils9 libmbedcrypto7 libndctl6 libnftables1 libnss-sudo
Info: + libnvme1 libodbc2 libodbccr2 libopenexr-3-1-30 libopenh264-7 libpkgconf3
Info: + libplacebo208 libpmem1 libpostproc56 libproc2-0 librav1e0
Info: + libregexp-ipv6-perl librist4 libsgutils2-1.46-2 libsoup2.4-common
Info: + libsrt1.5-gnutls libstdc++-12-dev libsvtav1enc1 libswresample4 libswscale6
Info: + libtiff6 libtsan2 libunwind-16 liburcu8 liburing2 libvpx7 libwebp7
Info: + libwmf-0.2-7 libwmflite-0.2-7 libx264-164 libx265-199 libxcb-randr0 libyuv0
Info: + libzimg2 manpages-pt-br mariadb-client mariadb-client-core
Info: + mariadb-server-core ntpsec ntpsec-ntpdate ntpsec-ntpdig
Info: + openjdk-17-jre-headless pkgconf pkgconf-bin postgresql-15
Info: + postgresql-client-15 python3-ntp python3-platformdirs sgml-base
Info: + The following packages have been kept back:
Info: + yunohost-admin
Info: + The following packages will be upgraded:
Info: + adwaita-icon-theme apt-config-auto-update at autoconf automake autopoint
Info: + autotools-dev base-files base-passwd bash bash-completion bc bind9-dnsutils
Info: + bind9-host bind9-libs bison bsdextrautils bsdutils ca-certificates-java
Info: + carton chromium chromium-common cpp cron curl dash dbus-user-session
Info: + dconf-gsettings-backend dconf-service debhelper debianutils
Info: + debsuryorg-archive-keyring default-jre-headless dh-strip-nondeterminism
Info: + dialog dictionaries-common diffutils discover discover-data distro-info-data
Info: + dmeventd dmidecode dns-root-data dnsmasq dnsmasq-base dnsutils
Info: + dovecot-antispam dovecot-core dovecot-imapd dovecot-ldap dovecot-lmtpd
Info: + dovecot-managesieved dovecot-sieve dpkg-dev dwz eject emacsen-common ethtool
Info: + fail2ban fake-hwclock fakeroot ffmpeg file findutils fontconfig
Info: + fontconfig-config fonts-dejavu-core fonts-glyphicons-halflings
Info: + freeipmi-common g++ galera-4 gawk gcc gettext gettext-base git git-man
Info: + glib-networking glib-networking-common glib-networking-services gnupg-agent
Info: + graphviz grep groff-base grub-common grub-pc grub-pc-bin grub2-common
Info: + gsasl-common gsettings-desktop-schemas gtk-update-icon-cache guile-2.2-libs
Info: + gzip haveged hostname htop hunspell hunspell-de-de hunspell-en-gb iamerican
Info: + ibritish icu-devtools ienglish-common imagemagick imagemagick-6-common
Info: + imagemagick-6.q16 init installation-report intltool-debian ipmitool
Info: + iputils-ping irqbalance isc-dhcp-client isc-dhcp-common iso-codes ispell
Info: + j2cli java-common jpegoptim ldap-utils libaio1 libann0 libapache-pom-java
Info: + libarchive13 libasan6 libasound2 libasound2-data libass9 libasyncns0
Info: + libatk-bridge2.0-0 libatk1.0-0 libatomic1 libatspi2.0-0 libattr1
Info: + libauthen-sasl-perl libavahi-client3 libavahi-common-data libavahi-common3
Info: + libbcprov-java libblas3 libbluray2 libbrotli1 libbs2b0 libc-ares2 libc-bin
Info: + libc-client2007e libc-l10n libcaca0 libcairo-gobject2 libcairo2
Info: + libcapture-tiny-perl libcc1-0 libcdio-cdda2 libcdio-paranoia2 libcdio19
Info: + libcdt5 libcgi-pm-perl libcgraph6 libchromaprint1 libclass-tiny-perl
Info: + libcolord2 libcommons-lang3-java libcommons-parent-java
Info: + libconfig-inifiles-perl libconvert-asn1-perl libcpan-common-index-perl
Info: + libcpan-distnameinfo-perl libcpan-meta-check-perl libcups2 libcurl3-gnutls
Info: + libcurl4 libdatrie1 libdc1394-25 libdconf1 libde265-0 libdebconfclient0
Info: + libdebhelper-perl libdeflate0 libdevmapper-event1.02.1 libdigest-hmac-perl
Info: + libdiscover2 libdjvulibre21 libdouble-conversion3 libdpkg-perl
Info: + libdrm-amdgpu1 libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1
Info: + libdrm2 libedit2 libencode-locale-perl libepoxy0 liberror-perl libestr0
Info: + libevent-2.1-7 libevent-core-2.1-7 libevent-dev libevent-extra-2.1-7
Info: + libevent-openssl-2.1-7 libevent-pthreads-2.1-7 libextutils-config-perl
Info: + libextutils-helpers-perl libfakeroot libfastjson4 libfftw3-double3
Info: + libfile-listing-perl libfile-pushd-perl libfile-stripnondeterminism-perl
Info: + libfile-which-perl libfl2 libflite1 libfont-afm-perl libfontconfig1
Info: + libfreeipmi17 libfreetype6 libfribidi0 libfstrm0 libfuse2 libgbm1 libgc1
Info: + libgd3 libgdbm-compat4 libgdk-pixbuf-2.0-0 libgdk-pixbuf2.0-common libgeoip1
Info: + libgfortran5 libgl1 libgl1-mesa-dri libglapi-mesa libglib2.0-0
Info: + libglib2.0-data libglvnd0 libglx-mesa0 libglx0 libgme0 libgomp1 libgpm2
Info: + libgsm1 libgtk-3-0 libgtk-3-common libgts-0.7-5 libgvc6 libgvpr2
Info: + libharfbuzz0b libhashkit2 libhavege2 libheif1 libhogweed6 libhtml-form-perl
Info: + libhtml-format-perl libhtml-tagset-perl libhtml-template-perl
Info: + libhtml-tree-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl
Info: + libhttp-negotiate-perl libhttp-tinyish-perl libhunspell-1.7-0 libicu-dev
Info: + libidn2-0 libiec61883-0 libimagequant0 libinih1 libio-html-perl
Info: + libio-socket-inet6-perl libio-socket-ssl-perl libipc-run3-perl libisl23
Info: + libitm1 libjack-jackd2-0 libjbig0 libjemalloc2 libjpeg62-turbo
Info: + libjs-bootstrap4 libjs-jquery libjs-popper.js libjs-requirejs
Info: + libjs-underscore libjson-glib-1.0-0 libjson-glib-1.0-common liblab-gamut1
Info: + liblapack3 liblcms2-2 libldap-common liblilv-0-0 liblocal-lib-perl
Info: + liblognorm5 liblsan0 libltdl7 liblua5.1-0 liblua5.3-0 liblvm2cmd2.03
Info: + liblwp-mediatypes-perl libmagic-mgc libmagic1 libmagickcore-6.q16-6
Info: + libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libmailtools-perl
Info: + libmariadb3 libmaxminddb0 libmemcached11 libmenlo-perl libmfx1
Info: + libminiupnpc17 libminizip1 libmodule-build-perl libmodule-cpanfile-perl
Info: + libmp3lame0 libmpc3 libmpdec3 libmpfr6 libmpg123-0 libmysofa1 libncurses5
Info: + libncursesw5 libnet-dns-perl libnet-http-perl libnet-ip-perl
Info: + libnet-smtp-ssl-perl libnettle8 libnewt0.52 libnghttp2-14 libnl-3-200
Info: + libnl-genl-3-200 libnspr4 libnspr4-dev libnss-ldapd libnss-myhostname
Info: + libnss3 libnss3-dev libntlm0 libnuma1 libodbc1 libogg0 libonig5 libopendbx1
Info: + libopendbx1-sqlite3 libopenjp2-7 libopenmpt0 libopts25 libopus0 libpam-ldapd
Info: + libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libparse-pmfile-perl
Info: + libparted2 libpath-tiny-perl libpathplan4 libpcap0.8 libpci3 libpciaccess0
Info: + libpcre16-3 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpcsclite1
Info: + libpipeline1 libpixman-1-0 libpng-dev libpng16-16 libpocketsphinx3
Info: + libpod-parser-perl libpopt0 libpq-dev libpq5 libprotobuf-c1 libproxy1v5
Info: + libpsl5 libpulse0 libpython3.11 libpython3.11-dev libpython3.11-minimal
Info: + libpython3.11-stdlib libquadmath0 librabbitmq4 libraqm0 librbl1 librsvg2-2
Info: + librsvg2-bin librsvg2-common librubberband2 libsamplerate0 libsasl2-modules
Info: + libsdl2-2.0-0 libsensors-config libsensors5 libserd-0-0 libsigsegv2
Info: + libslang2 libsmbclient libsnappy1v5 libsndfile1 libsndio7.0 libsord-0-0
Info: + libsoup-gnome2.4-1 libsoup2.4-1 libspeex1 libsphinxbase3 libsratom-0-0
Info: + libss2 libssh-gcrypt-4 libssh2-1 libssl-dev libstemmer0d
Info: + libstring-shellquote-perl libsub-override-perl libsys-hostname-long-perl
Info: + libtasn1-6 libthai-data libthai0 libtheora0 libtie-handle-offset-perl
Info: + libtinfo5 libtool libtry-tiny-perl libtsan0 libubsan1 libudfread0
Info: + libunbound8 libunistring2 libunwind8 liburi-perl libusb-1.0-0 libustr-1.0-1
Info: + libutempter0 libuv1 libva-drm2 libva-x11-2 libva2 libvbr2 libvdpau1
Info: + libvulkan1 libwavpack1 libwayland-client0 libwayland-cursor0 libwayland-egl1
Info: + libwayland-server0 libwbclient0 libwebpdemux2 libwebpmux3 libwmf0.2-7
Info: + libwoff1 libwrap0 libwww-perl libx11-6 libx11-data libx11-xcb1 libxaw7
Info: + libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-render0
Info: + libxcb-shape0 libxcb-shm0 libxcb-sync1 libxcb-xfixes0 libxcb1 libxcursor1
Info: + libxdamage1 libxext6 libxfixes3 libxft2 libxi6 libxinerama1 libxkbcommon0
Info: + libxml2 libxml2-dev libxmu6 libxmuu1 libxnvctrl0 libxpm4 libxrandr2
Info: + libxrender1 libxslt1.1 libxt6 libxtst6 libxv1 libxxf86dga1 libyaml-0-2
Info: + libyaml-dev libz3-4 libzip4 libzmq5 libzvbi-common libzvbi0 locales
Info: + logrotate lsb-release lsof lua-bitop lua-cjson lua-event lua-expat
Info: + lua-filesystem lua-ldap lua-lpeg lua-sec lua-socket lua-zlib lua5.3 lvm2 m4
Info: + mailcap mailutils mailutils-common man-db manpages-de manpages-es
Info: + manpages-fr manpages-it manpages-pl manpages-pt mariadb-common
Info: + mariadb-server mariadb-server-10.5 mawk mdadm media-types memcached mlock
Info: + mtr-tiny mysql-common nano ncal ncurses-base net-tools netcat-openbsd nslcd
Info: + nslcd-utils ntp ntpdate nvme-cli ocl-icd-libopencl1 opendkim-tools
Info: + openssh-sftp-server optipng parted pci.ids pciutils pdftk-java php-common
Info: + php-mbstring php-pear php-php-gettext php-xml php7.0-cli php7.0-common
Info: + php7.0-json php7.0-mbstring php7.0-opcache php7.0-readline php7.0-xml
Info: + php7.3-cli php7.3-common php7.3-curl php7.3-fpm php7.3-gd php7.3-imagick
Info: + php7.3-intl php7.3-json php7.3-mbstring php7.3-mysql php7.3-opcache
Info: + php7.3-readline php7.3-soap php7.3-xml php7.3-zip php7.4-apcu php7.4-bcmath
Info: + php7.4-bz2 php7.4-cli php7.4-common php7.4-curl php7.4-fpm php7.4-gd
Info: + php7.4-gmp php7.4-igbinary php7.4-imagick php7.4-imap php7.4-intl
Info: + php7.4-json php7.4-ldap php7.4-mbstring php7.4-mysql php7.4-opcache
Info: + php7.4-pgsql php7.4-readline php7.4-redis php7.4-soap php7.4-sqlite3
Info: + php7.4-xml php7.4-zip php8.0-cli php8.0-common php8.0-gd php8.0-mbstring
Info: + php8.0-opcache php8.0-readline php8.0-xml php8.1-cli php8.1-common php8.1-gd
Info: + php8.1-mbstring php8.1-opcache php8.1-readline php8.1-xml php8.2
Info: + php8.2-bcmath php8.2-cli php8.2-common php8.2-curl php8.2-fpm php8.2-gd
Info: + php8.2-igbinary php8.2-imagick php8.2-intl php8.2-ldap php8.2-mbstring
Info: + php8.2-mysql php8.2-opcache php8.2-pgsql php8.2-phpdbg php8.2-readline
Info: + php8.2-redis php8.2-tidy php8.2-xml php8.2-zip php8.3 php8.3-apcu
Info: + php8.3-bcmath php8.3-bz2 php8.3-cli php8.3-common php8.3-curl php8.3-fpm
Info: + php8.3-gd php8.3-gmp php8.3-igbinary php8.3-imagick php8.3-imap php8.3-intl
Info: + php8.3-ldap php8.3-mbstring php8.3-mysql php8.3-opcache php8.3-readline
Info: + php8.3-redis php8.3-xml php8.3-zip pkg-config pngquant postfix postfix-ldap
Info: + postfix-pcre postfix-policyd-spf-perl postfix-sqlite postgresql postsrsd
Info: + procmail procps psmisc python-apt-common python3-appdirs python3-attr
Info: + python3-dateutil python3-defusedxml python3-distro-info python3-freezegun
Info: + python3-future python3-gevent-websocket python3-ifaddr python3-isodate
Info: + python3-pip python3-prompt-toolkit python3-pyasn1 python3-pyasn1-modules
Info: + python3-pygments python3-pyinotify python3-pyparsing
Info: + python3-requests-toolbelt python3-tz python3-wcwidth python3-wheel
Info: + python3-zeep python3.11 python3.11-dev python3.11-minimal redis-server
Info: + redis-tools resolvconf rsync rsyslog samba-common samba-libs screen sed
Info: + sg3-utils shared-mime-info slapd smartmontools smbclient socat sudo-ldap
Info: + supervisor sysstat task-english tasksel tasksel-data tcpdump tzdata
Info: + unattended-upgrades unzip util-linux-locales uuid-runtime vim vim-common
Info: + vim-runtime vim-tiny wamerican wget whiptail whois x11-common xfsprogs xxd
Info: + xz-utils yunohost zip
Info: + 734 upgraded, 92 newly installed, 5 to remove and 1 not upgraded.
Info: + Need to get 1,222 kB/620 MB of archives.
Info: + After this operation, 1,000 MB of additional disk space will be used.
Info: + Get:1 https://forge.yunohost.org/debian bookworm/stable amd64 yunohost all 12.0.7 [1,222 kB]
Info: + Fetched 1,222 kB in 1s (841 kB/s)
Warning: E: This installation run will require temporarily removing the essential package cron:amd64 due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
Warning: E: Internal Error, Could not early remove cron:amd64 (2)
Warning: Could not upgrade packages: adwaita-icon-theme, apt-config-auto-update, at, autoconf, automake, autopoint, autotools-dev, base-files, base-passwd, bash-completion, bash, bc, bind9-dnsutils, bind9-host, bind9-libs, bison, bsdextrautils, bsdutils, ca-certificates-java, carton, chromium-common, chromium, cpp, cron, curl, dash, dbus-user-session, dconf-gsettings-backend, dconf-service, debhelper, debianutils, debsuryorg-archive-keyring, default-jre-headless, dh-strip-nondeterminism, dialog, dictionaries-common, diffutils, discover-data, discover, distro-info-data, dmeventd, dmidecode, dns-root-data, dnsmasq-base, dnsmasq, dnsutils, dovecot-antispam, dovecot-core, dovecot-imapd, dovecot-ldap, dovecot-lmtpd, dovecot-managesieved, dovecot-sieve, dpkg-dev, dwz, eject, emacsen-common, ethtool, fail2ban, fake-hwclock, fakeroot, ffmpeg, file, findutils, fontconfig-config, fontconfig, fonts-dejavu-core, fonts-glyphicons-halflings, freeipmi-common, g++, galera-4, gawk, gcc, gettext-base, gettext, git-man, git, glib-networking-common, glib-networking-services, glib-networking, gnupg-agent, graphviz, grep, groff-base, grub-common, grub-pc-bin, grub-pc, grub2-common, gsasl-common, gsettings-desktop-schemas, gtk-update-icon-cache, guile-2.2-libs, gzip, haveged, hostname, htop, hunspell-de-de, hunspell-en-gb, hunspell, iamerican, ibritish, icu-devtools, ienglish-common, imagemagick-6-common, imagemagick-6.q16, imagemagick, init, installation-report, intltool-debian, ipmitool, iputils-ping, irqbalance, isc-dhcp-client, isc-dhcp-common, iso-codes, ispell, j2cli, java-common, jpegoptim, ldap-utils, libaio1, libann0, libapache-pom-java, libarchive13, libasan6, libasound2-data, libasound2, libass9, libasyncns0, libatk-bridge2.0-0, libatk1.0-0, libatomic1, libatspi2.0-0, libattr1, libauthen-sasl-perl, libavahi-client3, libavahi-common-data, libavahi-common3, libbcprov-java, libblas3, libbluray2, libbrotli1, libbs2b0, libc-ares2, libc-bin, libc-client2007e, libc-l10n, libcaca0, libcairo-gobject2, libcairo2, libcapture-tiny-perl, libcc1-0, libcdio-cdda2, libcdio-paranoia2, libcdio19, libcdt5, libcgi-pm-perl, libcgraph6, libchromaprint1, libclass-tiny-perl, libcolord2, libcommons-lang3-java, libcommons-parent-java, libconfig-inifiles-perl, libconvert-asn1-perl, libcpan-common-index-perl, libcpan-distnameinfo-perl, libcpan-meta-check-perl, libcups2, libcurl3-gnutls, libcurl4, libdatrie1, libdc1394-25, libdconf1, libde265-0, libdebconfclient0, libdebhelper-perl, libdeflate0, libdevmapper-event1.02.1, libdigest-hmac-perl, libdiscover2, libdjvulibre21, libdouble-conversion3, libdpkg-perl, libdrm-amdgpu1, libdrm-common, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libedit2, libencode-locale-perl, libepoxy0, liberror-perl, libestr0, libevent-2.1-7, libevent-core-2.1-7, libevent-dev, libevent-extra-2.1-7, libevent-openssl-2.1-7, libevent-pthreads-2.1-7, libextutils-config-perl, libextutils-helpers-perl, libfakeroot, libfastjson4, libfftw3-double3, libfile-listing-perl, libfile-pushd-perl, libfile-stripnondeterminism-perl, libfile-which-perl, libfl2, libflite1, libfont-afm-perl, libfontconfig1, libfreeipmi17, libfreetype6, libfribidi0, libfstrm0, libfuse2, libgbm1, libgc1, libgd3, libgdbm-compat4, libgdk-pixbuf-2.0-0, libgdk-pixbuf2.0-common, libgeoip1, libgfortran5, libgl1-mesa-dri, libgl1, libglapi-mesa, libglib2.0-0, libglib2.0-data, libglvnd0, libglx-mesa0, libglx0, libgme0, libgomp1, libgpm2, libgsm1, libgtk-3-0, libgtk-3-common, libgts-0.7-5, libgvc6, libgvpr2, libharfbuzz0b, libhashkit2, libhavege2, libheif1, libhogweed6, libhtml-form-perl, libhtml-format-perl, libhtml-tagset-perl, libhtml-template-perl, libhtml-tree-perl, libhttp-daemon-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, libhttp-tinyish-perl, libhunspell-1.7-0, libicu-dev, libidn2-0, libiec61883-0, libimagequant0, libinih1, libio-html-perl, libio-socket-inet6-perl, libio-socket-ssl-perl, libipc-run3-perl, libisl23, libitm1, libjack-jackd2-0, libjbig0, libjemalloc2, libjpeg62-turbo, libjs-bootstrap4, libjs-jquery, libjs-popper.js, libjs-requirejs, libjs-underscore, libjson-glib-1.0-0, libjson-glib-1.0-common, liblab-gamut1, liblapack3, liblcms2-2, libldap-common, liblilv-0-0, liblocal-lib-perl, liblognorm5, liblsan0, libltdl7, liblua5.1-0, liblua5.3-0, liblvm2cmd2.03, liblwp-mediatypes-perl, libmagic-mgc, libmagic1, libmagickcore-6.q16-6-extra, libmagickcore-6.q16-6, libmagickwand-6.q16-6, libmailtools-perl, libmariadb3, libmaxminddb0, libmemcached11, libmenlo-perl, libmfx1, libminiupnpc17, libminizip1, libmodule-build-perl, libmodule-cpanfile-perl, libmp3lame0, libmpc3, libmpdec3, libmpfr6, libmpg123-0, libmysofa1, libncurses5, libncursesw5, libnet-dns-perl, libnet-http-perl, libnet-ip-perl, libnet-smtp-ssl-perl, libnettle8, libnewt0.52, libnghttp2-14, libnl-3-200, libnl-genl-3-200, libnspr4-dev, libnspr4, libnss-ldapd, libnss-myhostname, libnss3-dev, libnss3, libntlm0, libnuma1, libodbc1, libogg0, libonig5, libopendbx1-sqlite3, libopendbx1, libopenjp2-7, libopenmpt0, libopts25, libopus0, libpam-ldapd, libpango-1.0-0, libpangocairo-1.0-0, libpangoft2-1.0-0, libparse-pmfile-perl, libparted2, libpath-tiny-perl, libpathplan4, libpcap0.8, libpci3, libpciaccess0, libpcre16-3, libpcre3-dev, libpcre32-3, libpcre3, libpcrecpp0v5, libpcsclite1, libpipeline1, libpixman-1-0, libpng-dev, libpng16-16, libpocketsphinx3, libpod-parser-perl, libpopt0, libpq-dev, libpq5, libprotobuf-c1, libproxy1v5, libpsl5, libpulse0, libpython3.11-dev, libpython3.11-minimal, libpython3.11-stdlib, libpython3.11, libquadmath0, librabbitmq4, libraqm0, librbl1, librsvg2-2, librsvg2-bin, librsvg2-common, librubberband2, libsamplerate0, libsasl2-modules, libsdl2-2.0-0, libsensors-config, libsensors5, libserd-0-0, libsigsegv2, libslang2, libsmbclient, libsnappy1v5, libsndfile1, libsndio7.0, libsord-0-0, libsoup-gnome2.4-1, libsoup2.4-1, libspeex1, libsphinxbase3, libsratom-0-0, libss2, libssh-gcrypt-4, libssh2-1, libssl-dev, libstemmer0d, libstring-shellquote-perl, libsub-override-perl, libsys-hostname-long-perl, libtasn1-6, libthai-data, libthai0, libtheora0, libtie-handle-offset-perl, libtinfo5, libtool, libtry-tiny-perl, libtsan0, libubsan1, libudfread0, libunbound8, libunistring2, libunwind8, liburi-perl, libusb-1.0-0, libustr-1.0-1, libutempter0, libuv1, libva-drm2, libva-x11-2, libva2, libvbr2, libvdpau1, libvulkan1, libwavpack1, libwayland-client0, libwayland-cursor0, libwayland-egl1, libwayland-server0, libwbclient0, libwebpdemux2, libwebpmux3, libwmf0.2-7, libwoff1, libwrap0, libwww-perl, libx11-6, libx11-data, libx11-xcb1, libxaw7, libxcb-dri2-0, libxcb-dri3-0, libxcb-glx0, libxcb-present0, libxcb-render0, libxcb-shape0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1, libxcursor1, libxdamage1, libxext6, libxfixes3, libxft2, libxi6, libxinerama1, libxkbcommon0, libxml2-dev, libxml2, libxmu6, libxmuu1, libxnvctrl0, libxpm4, libxrandr2, libxrender1, libxslt1.1, libxt6, libxtst6, libxv1, libxxf86dga1, libyaml-0-2, libyaml-dev, libz3-4, libzip4, libzmq5, libzvbi-common, libzvbi0, locales, logrotate, lsb-release, lsof, lua-bitop, lua-cjson, lua-event, lua-expat, lua-filesystem, lua-ldap, lua-lpeg, lua-sec, lua-socket, lua-zlib, lua5.3, lvm2, m4, mailcap, mailutils-common, mailutils, man-db, manpages-de, manpages-es, manpages-fr, manpages-it, manpages-pl, manpages-pt, mariadb-common, mariadb-server-10.5, mariadb-server, mawk, mdadm, media-types, memcached, mlock, mtr-tiny, mysql-common, nano, ncal, ncurses-base, net-tools, netcat-openbsd, nslcd-utils, nslcd, ntp, ntpdate, nvme-cli, ocl-icd-libopencl1, opendkim-tools, openssh-sftp-server, optipng, parted, pci.ids, pciutils, pdftk-java, php-common, php-mbstring, php-pear, php-php-gettext, php-xml, php7.0-cli, php7.0-common, php7.0-json, php7.0-mbstring, php7.0-opcache, php7.0-readline, php7.0-xml, php7.3-cli, php7.3-common, php7.3-curl, php7.3-fpm, php7.3-gd, php7.3-imagick, php7.3-intl, php7.3-json, php7.3-mbstring, php7.3-mysql, php7.3-opcache, php7.3-readline, php7.3-soap, php7.3-xml, php7.3-zip, php7.4-apcu, php7.4-bcmath, php7.4-bz2, php7.4-cli, php7.4-common, php7.4-curl, php7.4-fpm, php7.4-gd, php7.4-gmp, php7.4-igbinary, php7.4-imagick, php7.4-imap, php7.4-intl, php7.4-json, php7.4-ldap, php7.4-mbstring, php7.4-mysql, php7.4-opcache, php7.4-pgsql, php7.4-readline, php7.4-redis, php7.4-soap, php7.4-sqlite3, php7.4-xml, php7.4-zip, php8.0-cli, php8.0-common, php8.0-gd, php8.0-mbstring, php8.0-opcache, php8.0-readline, php8.0-xml, php8.1-cli, php8.1-common, php8.1-gd, php8.1-mbstring, php8.1-opcache, php8.1-readline, php8.1-xml, php8.2-bcmath, php8.2-cli, php8.2-common, php8.2-curl, php8.2-fpm, php8.2-gd, php8.2-igbinary, php8.2-imagick, php8.2-intl, php8.2-ldap, php8.2-mbstring, php8.2-mysql, php8.2-opcache, php8.2-pgsql, php8.2-phpdbg, php8.2-readline, php8.2-redis, php8.2-tidy, php8.2-xml, php8.2-zip, php8.2, php8.3-apcu, php8.3-bcmath, php8.3-bz2, php8.3-cli, php8.3-common, php8.3-curl, php8.3-fpm, php8.3-gd, php8.3-gmp, php8.3-igbinary, php8.3-imagick, php8.3-imap, php8.3-intl, php8.3-ldap, php8.3-mbstring, php8.3-mysql, php8.3-opcache, php8.3-readline, php8.3-redis, php8.3-xml, php8.3-zip, php8.3, pkg-config, pngquant, postfix-ldap, postfix-pcre, postfix-policyd-spf-perl, postfix-sqlite, postfix, postgresql, postsrsd, procmail, procps, psmisc, python-apt-common, python3-appdirs, python3-attr, python3-dateutil, python3-defusedxml, python3-distro-info, python3-freezegun, python3-future, python3-gevent-websocket, python3-ifaddr, python3-isodate, python3-pip, python3-prompt-toolkit, python3-pyasn1-modules, python3-pyasn1, python3-pygments, python3-pyinotify, python3-pyparsing, python3-requests-toolbelt, python3-tz, python3-wcwidth, python3-wheel, python3-zeep, python3.11-dev, python3.11-minimal, python3.11, redis-server, redis-tools, resolvconf, rsync, rsyslog, samba-common, samba-libs, screen, sed, sg3-utils, shared-mime-info, slapd, smartmontools, smbclient, socat, sudo-ldap, supervisor, sysstat, task-english, tasksel-data, tasksel, tcpdump, tzdata, unattended-upgrades, unzip, util-linux-locales, uuid-runtime, vim-common, vim-runtime, vim-tiny, vim, wamerican, wget, whiptail, whois, x11-common, xfsprogs, xxd, xz-utils, yunohost-admin, yunohost, zip
Success! System upgraded
```
[17:43:01] <hercut> Le conflit a cause des repos ?
[17:45:05] <cress1> Ca a l'air de fonctionner via le terminal
EDIT: yes, mais bon du coup étonnant que rien ne se passe sur l'IDE..
[17:45:23] <hercut> > <@hercut:matrix.org> ```
> Info: Upgrading packages…
> Info: Upgrading system packages
> Info: + Reading package lists...
> Info: + Building dependency tree...
> Info: + Reading state information...
> Info: + Correcting dependencies... Done
> Info: + Calculating upgrade...
> Info: + The following packages were automatically installed and are no longer required:
> Info: + g++-10 glib-networking glib-networking-common glib-networking-services
> Info: + gsettings-desktop-schemas guile-2.2-libs libabsl20200923 libaom0
> Info: + libatk1.0-data libavcodec58 libavdevice58 libavfilter7 libavformat58
> Info: + libavif9 libavresample4 libavutil56 libbpf0 libcbor0 libcodec2-0.9 libdav1d4
> Info: + libdns-export1110 libexpat1-dev libfl2 libflac8 libgav1-0 libilmbase25
> Info: + libisc-export1105 libjs-sphinxdoc libjs-underscore libjson-glib-1.0-0
> Info: + libjson-glib-1.0-common libjsoncpp24 liblua5.1-0 libmpdec3 libnet-ip-perl
> Info: + libodbc1 libodbccr2 libopenexr25 libopts25 libperl5.32 libpostproc55
> Info: + libprocps8 libproxy1v5 libpython3-dev libpython3.11-dev libpython3.9
> Info: + libpython3.9-dev libpython3.9-minimal libpython3.9-stdlib librest-0.7-0
> Info: + libsgutils2-2 libsoup-gnome2.4-1 libsoup2.4-1 libsoup2.4-common
> Info: + libsrt1.4-gnutls libstdc++-10-dev libswresample3 libswscale5 libtiff5
> Info: + libusb-0.1-4 libvpx6 libwavpack1 libwebp6 libwmf-0.2-7 libwmf0.2-7 libwoff1
> Info: + libx264-160 libx265-192 lua-bitop lua-event lua-expat lua-ldap lua-rex-pcre
> Info: + lua-sec lua-zlib lua5.3 mariadb-server-10.5 metronome perl-modules-5.32
> Info: + php-mbstring php-php-gettext php7.0-mbstring php7.4-curl php7.4-intl
> Info: + php7.4-ldap php7.4-mbstring php7.4-mysql php8.0-mbstring php8.1-mbstring
> Info: + python-pip-whl python3-appdirs python3-dev python3-future python3-ldb
> Info: + python3-pip python3-pyparsing python3-talloc python3-wheel python3.11-dev
> Info: + python3.9 python3.9-dev python3.9-minimal
> Info: + Use 'apt autoremove' to remove them.
> Info: + The following packages will be REMOVED:
> Info: + libgsasl7 libmailutils7 mariadb-client-10.5 mariadb-client-core-10.5
> Info: + mariadb-server-core-10.5
> Info: + The following NEW packages will be installed:
> Info: + at-spi2-common cpp-12 cron-daemon-common g++-12 gcc-11-base gcc-12
> Info: + guile-3.0-libs libabsl20220623 libaom3 libasan8 libavcodec59 libavdevice59
> Info: + libavfilter8 libavformat59 libavif15 libavutil57 libc++1-16 libc++abi1-16
> Info: + libcjson1 libclone-perl libcodec2-1.0 libdav1d6 libdaxctl1 libdecor-0-0
> Info: + libflac12 libgav1-1 libgcc-12-dev libgsasl18 libgssglue1 libharfbuzz-subset0
> Info: + libhwy1 libidn12 libimath-3-1-29 libjxl0.7 liblerc4 libllvm14 libllvm15
> Info: + liblua5.4-0 libmailutils9 libmbedcrypto7 libndctl6 libnftables1 libnss-sudo
> Info: + libnvme1 libodbc2 libodbccr2 libopenexr-3-1-30 libopenh264-7 libpkgconf3
> Info: + libplacebo208 libpmem1 libpostproc56 libproc2-0 librav1e0
> Info: + libregexp-ipv6-perl librist4 libsgutils2-1.46-2 libsoup2.4-common
> Info: + libsrt1.5-gnutls libstdc++-12-dev libsvtav1enc1 libswresample4 libswscale6
> Info: + libtiff6 libtsan2 libunwind-16 liburcu8 liburing2 libvpx7 libwebp7
> Info: + libwmf-0.2-7 libwmflite-0.2-7 libx264-164 libx265-199 libxcb-randr0 libyuv0
> Info: + libzimg2 manpages-pt-br mariadb-client mariadb-client-core
> Info: + mariadb-server-core ntpsec ntpsec-ntpdate ntpsec-ntpdig
> Info: + openjdk-17-jre-headless pkgconf pkgconf-bin postgresql-15
> Info: + postgresql-client-15 python3-ntp python3-platformdirs sgml-base
> Info: + The following packages have been kept back:
> Info: + yunohost-admin
> Info: + The following packages will be upgraded:
> Info: + adwaita-icon-theme apt-config-auto-update at autoconf automake autopoint
> Info: + autotools-dev base-files base-passwd bash bash-completion bc bind9-dnsutils
> Info: + bind9-host bind9-libs bison bsdextrautils bsdutils ca-certificates-java
> Info: + carton chromium chromium-common cpp cron curl dash dbus-user-session
> Info: + dconf-gsettings-backend dconf-service debhelper debianutils
> Info: + debsuryorg-archive-keyring default-jre-headless dh-strip-nondeterminism
> Info: + dialog dictionaries-common diffutils discover discover-data distro-info-data
> Info: + dmeventd dmidecode dns-root-data dnsmasq dnsmasq-base dnsutils
> Info: + dovecot-antispam dovecot-core dovecot-imapd dovecot-ldap dovecot-lmtpd
> Info: + dovecot-managesieved dovecot-sieve dpkg-dev dwz eject emacsen-common ethtool
> Info: + fail2ban fake-hwclock fakeroot ffmpeg file findutils fontconfig
> Info: + fontconfig-config fonts-dejavu-core fonts-glyphicons-halflings
> Info: + freeipmi-common g++ galera-4 gawk gcc gettext gettext-base git git-man
> Info: + glib-networking glib-networking-common glib-networking-services gnupg-agent
> Info: + graphviz grep groff-base grub-common grub-pc grub-pc-bin grub2-common
> Info: + gsasl-common gsettings-desktop-schemas gtk-update-icon-cache guile-2.2-libs
> Info: + gzip haveged hostname htop hunspell hunspell-de-de hunspell-en-gb iamerican
> Info: + ibritish icu-devtools ienglish-common imagemagick imagemagick-6-common
> Info: + imagemagick-6.q16 init installation-report intltool-debian ipmitool
> Info: + iputils-ping irqbalance isc-dhcp-client isc-dhcp-common iso-codes ispell
> Info: + j2cli java-common jpegoptim ldap-utils libaio1 libann0 libapache-pom-java
> Info: + libarchive13 libasan6 libasound2 libasound2-data libass9 libasyncns0
> Info: + libatk-bridge2.0-0 libatk1.0-0 libatomic1 libatspi2.0-0 libattr1
> Info: + libauthen-sasl-perl libavahi-client3 libavahi-common-data libavahi-common3
> Info: + libbcprov-java libblas3 libbluray2 libbrotli1 libbs2b0 libc-ares2 libc-bin
> Info: + libc-client2007e libc-l10n libcaca0 libcairo-gobject2 libcairo2
> Info: + libcapture-tiny-perl libcc1-0 libcdio-cdda2 libcdio-paranoia2 libcdio19
> Info: + libcdt5 libcgi-pm-perl libcgraph6 libchromaprint1 libclass-tiny-perl
> Info: + libcolord2 libcommons-lang3-java libcommons-parent-java
> Info: + libconfig-inifiles-perl libconvert-asn1-perl libcpan-common-index-perl
> Info: + libcpan-distnameinfo-perl libcpan-meta-check-perl libcups2 libcurl3-gnutls
> Info: + libcurl4 libdatrie1 libdc1394-25 libdconf1 libde265-0 libdebconfclient0
> Info: + libdebhelper-perl libdeflate0 libdevmapper-event1.02.1 libdigest-hmac-perl
> Info: + libdiscover2 libdjvulibre21 libdouble-conversion3 libdpkg-perl
> Info: + libdrm-amdgpu1 libdrm-common libdrm-intel1 libdrm-nouveau2 libdrm-radeon1
> Info: + libdrm2 libedit2 libencode-locale-perl libepoxy0 liberror-perl libestr0
> Info: + libevent-2.1-7 libevent-core-2.1-7 libevent-dev libevent-extra-2.1-7
> Info: + libevent-openssl-2.1-7 libevent-pthreads-2.1-7 libextutils-config-perl
> Info: + libextutils-helpers-perl libfakeroot libfastjson4 libfftw3-double3
> Info: + libfile-listing-perl libfile-pushd-perl libfile-stripnondeterminism-perl
> Info: + libfile-which-perl libfl2 libflite1 libfont-afm-perl libfontconfig1
> Info: + libfreeipmi17 libfreetype6 libfribidi0 libfstrm0 libfuse2 libgbm1 libgc1
> Info: + libgd3 libgdbm-compat4 libgdk-pixbuf-2.0-0 libgdk-pixbuf2.0-common libgeoip1
> Info: + libgfortran5 libgl1 libgl1-mesa-dri libglapi-mesa libglib2.0-0
> Info: + libglib2.0-data libglvnd0 libglx-mesa0 libglx0 libgme0 libgomp1 libgpm2
> Info: + libgsm1 libgtk-3-0 libgtk-3-common libgts-0.7-5 libgvc6 libgvpr2
> Info: + libharfbuzz0b libhashkit2 libhavege2 libheif1 libhogweed6 libhtml-form-perl
> Info: + libhtml-format-perl libhtml-tagset-perl libhtml-template-perl
> Info: + libhtml-tree-perl libhttp-daemon-perl libhttp-date-perl libhttp-message-perl
> Info: + libhttp-negotiate-perl libhttp-tinyish-perl libhunspell-1.7-0 libicu-dev
> Info: + libidn2-0 libiec61883-0 libimagequant0 libinih1 libio-html-perl
> Info: + libio-socket-inet6-perl libio-socket-ssl-perl libipc-run3-perl libisl23
> Info: + libitm1 libjack-jackd2-0 libjbig0 libjemalloc2 libjpeg62-turbo
> Info: + libjs-bootstrap4 libjs-jquery libjs-popper.js libjs-requirejs
> Info: + libjs-underscore libjson-glib-1.0-0 libjson-glib-1.0-common liblab-gamut1
> Info: + liblapack3 liblcms2-2 libldap-common liblilv-0-0 liblocal-lib-perl
> Info: + liblognorm5 liblsan0 libltdl7 liblua5.1-0 liblua5.3-0 liblvm2cmd2.03
> Info: + liblwp-mediatypes-perl libmagic-mgc libmagic1 libmagickcore-6.q16-6
> Info: + libmagickcore-6.q16-6-extra libmagickwand-6.q16-6 libmailtools-perl
> Info: + libmariadb3 libmaxminddb0 libmemcached11 libmenlo-perl libmfx1
> Info: + libminiupnpc17 libminizip1 libmodule-build-perl libmodule-cpanfile-perl
> Info: + libmp3lame0 libmpc3 libmpdec3 libmpfr6 libmpg123-0 libmysofa1 libncurses5
> Info: + libncursesw5 libnet-dns-perl libnet-http-perl libnet-ip-perl
> Info: + libnet-smtp-ssl-perl libnettle8 libnewt0.52 libnghttp2-14 libnl-3-200
> Info: + libnl-genl-3-200 libnspr4 libnspr4-dev libnss-ldapd libnss-myhostname
> Info: + libnss3 libnss3-dev libntlm0 libnuma1 libodbc1 libogg0 libonig5 libopendbx1
> Info: + libopendbx1-sqlite3 libopenjp2-7 libopenmpt0 libopts25 libopus0 libpam-ldapd
> Info: + libpango-1.0-0 libpangocairo-1.0-0 libpangoft2-1.0-0 libparse-pmfile-perl
> Info: + libparted2 libpath-tiny-perl libpathplan4 libpcap0.8 libpci3 libpciaccess0
> Info: + libpcre16-3 libpcre3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libpcsclite1
> Info: + libpipeline1 libpixman-1-0 libpng-dev libpng16-16 libpocketsphinx3
> Info: + libpod-parser-perl libpopt0 libpq-dev libpq5 libprotobuf-c1 libproxy1v5
> Info: + libpsl5 libpulse0 libpython3.11 libpython3.11-dev libpython3.11-minimal
> Info: + libpython3.11-stdlib libquadmath0 librabbitmq4 libraqm0 librbl1 librsvg2-2
> Info: + librsvg2-bin librsvg2-common librubberband2 libsamplerate0 libsasl2-modules
> Info: + libsdl2-2.0-0 libsensors-config libsensors5 libserd-0-0 libsigsegv2
> Info: + libslang2 libsmbclient libsnappy1v5 libsndfile1 libsndio7.0 libsord-0-0
> Info: + libsoup-gnome2.4-1 libsoup2.4-1 libspeex1 libsphinxbase3 libsratom-0-0
> Info: + libss2 libssh-gcrypt-4 libssh2-1 libssl-dev libstemmer0d
> Info: + libstring-shellquote-perl libsub-override-perl libsys-hostname-long-perl
> Info: + libtasn1-6 libthai-data libthai0 libtheora0 libtie-handle-offset-perl
> Info: + libtinfo5 libtool libtry-tiny-perl libtsan0 libubsan1 libudfread0
> Info: + libunbound8 libunistring2 libunwind8 liburi-perl libusb-1.0-0 libustr-1.0-1
> Info: + libutempter0 libuv1 libva-drm2 libva-x11-2 libva2 libvbr2 libvdpau1
> Info: + libvulkan1 libwavpack1 libwayland-client0 libwayland-cursor0 libwayland-egl1
> Info: + libwayland-server0 libwbclient0 libwebpdemux2 libwebpmux3 libwmf0.2-7
> Info: + libwoff1 libwrap0 libwww-perl libx11-6 libx11-data libx11-xcb1 libxaw7
> Info: + libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-present0 libxcb-render0
> Info: + libxcb-shape0 libxcb-shm0 libxcb-sync1 libxcb-xfixes0 libxcb1 libxcursor1
> Info: + libxdamage1 libxext6 libxfixes3 libxft2 libxi6 libxinerama1 libxkbcommon0
> Info: + libxml2 libxml2-dev libxmu6 libxmuu1 libxnvctrl0 libxpm4 libxrandr2
> Info: + libxrender1 libxslt1.1 libxt6 libxtst6 libxv1 libxxf86dga1 libyaml-0-2
> Info: + libyaml-dev libz3-4 libzip4 libzmq5 libzvbi-common libzvbi0 locales
> Info: + logrotate lsb-release lsof lua-bitop lua-cjson lua-event lua-expat
> Info: + lua-filesystem lua-ldap lua-lpeg lua-sec lua-socket lua-zlib lua5.3 lvm2 m4
> Info: + mailcap mailutils mailutils-common man-db manpages-de manpages-es
> Info: + manpages-fr manpages-it manpages-pl manpages-pt mariadb-common
> Info: + mariadb-server mariadb-server-10.5 mawk mdadm media-types memcached mlock
> Info: + mtr-tiny mysql-common nano ncal ncurses-base net-tools netcat-openbsd nslcd
> Info: + nslcd-utils ntp ntpdate nvme-cli ocl-icd-libopencl1 opendkim-tools
> Info: + openssh-sftp-server optipng parted pci.ids pciutils pdftk-java php-common
> Info: + php-mbstring php-pear php-php-gettext php-xml php7.0-cli php7.0-common
> Info: + php7.0-json php7.0-mbstring php7.0-opcache php7.0-readline php7.0-xml
> Info: + php7.3-cli php7.3-common php7.3-curl php7.3-fpm php7.3-gd php7.3-imagick
> Info: + php7.3-intl php7.3-json php7.3-mbstring php7.3-mysql php7.3-opcache
> Info: + php7.3-readline php7.3-soap php7.3-xml php7.3-zip php7.4-apcu php7.4-bcmath
> Info: + php7.4-bz2 php7.4-cli php7.4-common php7.4-curl php7.4-fpm php7.4-gd
> Info: + php7.4-gmp php7.4-igbinary php7.4-imagick php7.4-imap php7.4-intl
> Info: + php7.4-json php7.4-ldap php7.4-mbstring php7.4-mysql php7.4-opcache
> Info: + php7.4-pgsql php7.4-readline php7.4-redis php7.4-soap php7.4-sqlite3
> Info: + php7.4-xml php7.4-zip php8.0-cli php8.0-common php8.0-gd php8.0-mbstring
> Info: + php8.0-opcache php8.0-readline php8.0-xml php8.1-cli php8.1-common php8.1-gd
> Info: + php8.1-mbstring php8.1-opcache php8.1-readline php8.1-xml php8.2
> Info: + php8.2-bcmath php8.2-cli php8.2-common php8.2-curl php8.2-fpm php8.2-gd
> Info: + php8.2-igbinary php8.2-imagick php8.2-intl php8.2-ldap php8.2-mbstring
> Info: + php8.2-mysql php8.2-opcache php8.2-pgsql php8.2-phpdbg php8.2-readline
> Info: + php8.2-redis php8.2-tidy php8.2-xml php8.2-zip php8.3 php8.3-apcu
> Info: + php8.3-bcmath php8.3-bz2 php8.3-cli php8.3-common php8.3-curl php8.3-fpm
> Info: + php8.3-gd php8.3-gmp php8.3-igbinary php8.3-imagick php8.3-imap php8.3-intl
> Info: + php8.3-ldap php8.3-mbstring php8.3-mysql php8.3-opcache php8.3-readline
> Info: + php8.3-redis php8.3-xml php8.3-zip pkg-config pngquant postfix postfix-ldap
> Info: + postfix-pcre postfix-policyd-spf-perl postfix-sqlite postgresql postsrsd
> Info: + procmail procps psmisc python-apt-common python3-appdirs python3-attr
> Info: + python3-dateutil python3-defusedxml python3-distro-info python3-freezegun
> Info: + python3-future python3-gevent-websocket python3-ifaddr python3-isodate
> Info: + python3-pip python3-prompt-toolkit python3-pyasn1 python3-pyasn1-modules
> Info: + python3-pygments python3-pyinotify python3-pyparsing
> Info: + python3-requests-toolbelt python3-tz python3-wcwidth python3-wheel
> Info: + python3-zeep python3.11 python3.11-dev python3.11-minimal redis-server
> Info: + redis-tools resolvconf rsync rsyslog samba-common samba-libs screen sed
> Info: + sg3-utils shared-mime-info slapd smartmontools smbclient socat sudo-ldap
> Info: + supervisor sysstat task-english tasksel tasksel-data tcpdump tzdata
> Info: + unattended-upgrades unzip util-linux-locales uuid-runtime vim vim-common
> Info: + vim-runtime vim-tiny wamerican wget whiptail whois x11-common xfsprogs xxd
> Info: + xz-utils yunohost zip
> Info: + 734 upgraded, 92 newly installed, 5 to remove and 1 not upgraded.
> Info: + Need to get 1,222 kB/620 MB of archives.
> Info: + After this operation, 1,000 MB of additional disk space will be used.
> Info: + Get:1 https://forge.yunohost.org/debian bookworm/stable amd64 yunohost all 12.0.7 [1,222 kB]
> Info: + Fetched 1,222 kB in 1s (841 kB/s)
> Warning: E: This installation run will require temporarily removing the essential package cron:amd64 due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
> Warning: E: Internal Error, Could not early remove cron:amd64 (2)
> Warning: Could not upgrade packages: adwaita-icon-theme, apt-config-auto-update, at, autoconf, automake, autopoint, autotools-dev, base-files, base-passwd, bash-completion, bash, bc, bind9-dnsutils, bind9-host, bind9-libs, bison, bsdextrautils, bsdutils, ca-certificates-java, carton, chromium-common, chromium, cpp, cron, curl, dash, dbus-user-session, dconf-gsettings-backend, dconf-service, debhelper, debianutils, debsuryorg-archive-keyring, default-jre-headless, dh-strip-nondeterminism, dialog, dictionaries-common, diffutils, discover-data, discover, distro-info-data, dmeventd, dmidecode, dns-root-data, dnsmasq-base, dnsmasq, dnsutils, dovecot-antispam, dovecot-core, dovecot-imapd, dovecot-ldap, dovecot-lmtpd, dovecot-managesieved, dovecot-sieve, dpkg-dev, dwz, eject, emacsen-common, ethtool, fail2ban, fake-hwclock, fakeroot, ffmpeg, file, findutils, fontconfig-config, fontconfig, fonts-dejavu-core, fonts-glyphicons-halflings, freeipmi-common, g++, galera-4, gawk, gcc, gettext-base, gettext, git-man, git, glib-networking-common, glib-networking-services, glib-networking, gnupg-agent, graphviz, grep, groff-base, grub-common, grub-pc-bin, grub-pc, grub2-common, gsasl-common, gsettings-desktop-schemas, gtk-update-icon-cache, guile-2.2-libs, gzip, haveged, hostname, htop, hunspell-de-de, hunspell-en-gb, hunspell, iamerican, ibritish, icu-devtools, ienglish-common, imagemagick-6-common, imagemagick-6.q16, imagemagick, init, installation-report, intltool-debian, ipmitool, iputils-ping, irqbalance, isc-dhcp-client, isc-dhcp-common, iso-codes, ispell, j2cli, java-common, jpegoptim, ldap-utils, libaio1, libann0, libapache-pom-java, libarchive13, libasan6, libasound2-data, libasound2, libass9, libasyncns0, libatk-bridge2.0-0, libatk1.0-0, libatomic1, libatspi2.0-0, libattr1, libauthen-sasl-perl, libavahi-client3, libavahi-common-data, libavahi-common3, libbcprov-java, libblas3, libbluray2, libbrotli1, libbs2b0, libc-ares2, libc-bin, libc-client2007e, libc-l10n, libcaca0, libcairo-gobject2, libcairo2, libcapture-tiny-perl, libcc1-0, libcdio-cdda2, libcdio-paranoia2, libcdio19, libcdt5, libcgi-pm-perl, libcgraph6, libchromaprint1, libclass-tiny-perl, libcolord2, libcommons-lang3-java, libcommons-parent-java, libconfig-inifiles-perl, libconvert-asn1-perl, libcpan-common-index-perl, libcpan-distnameinfo-perl, libcpan-meta-check-perl, libcups2, libcurl3-gnutls, libcurl4, libdatrie1, libdc1394-25, libdconf1, libde265-0, libdebconfclient0, libdebhelper-perl, libdeflate0, libdevmapper-event1.02.1, libdigest-hmac-perl, libdiscover2, libdjvulibre21, libdouble-conversion3, libdpkg-perl, libdrm-amdgpu1, libdrm-common, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libedit2, libencode-locale-perl, libepoxy0, liberror-perl, libestr0, libevent-2.1-7, libevent-core-2.1-7, libevent-dev, libevent-extra-2.1-7, libevent-openssl-2.1-7, libevent-pthreads-2.1-7, libextutils-config-perl, libextutils-helpers-perl, libfakeroot, libfastjson4, libfftw3-double3, libfile-listing-perl, libfile-pushd-perl, libfile-stripnondeterminism-perl, libfile-which-perl, libfl2, libflite1, libfont-afm-perl, libfontconfig1, libfreeipmi17, libfreetype6, libfribidi0, libfstrm0, libfuse2, libgbm1, libgc1, libgd3, libgdbm-compat4, libgdk-pixbuf-2.0-0, libgdk-pixbuf2.0-common, libgeoip1, libgfortran5, libgl1-mesa-dri, libgl1, libglapi-mesa, libglib2.0-0, libglib2.0-data, libglvnd0, libglx-mesa0, libglx0, libgme0, libgomp1, libgpm2, libgsm1, libgtk-3-0, libgtk-3-common, libgts-0.7-5, libgvc6, libgvpr2, libharfbuzz0b, libhashkit2, libhavege2, libheif1, libhogweed6, libhtml-form-perl, libhtml-format-perl, libhtml-tagset-perl, libhtml-template-perl, libhtml-tree-perl, libhttp-daemon-perl, libhttp-date-perl, libhttp-message-perl, libhttp-negotiate-perl, libhttp-tinyish-perl, libhunspell-1.7-0, libicu-dev, libidn2-0, libiec61883-0, libimagequant0, libinih1, libio-html-perl, libio-socket-inet6-perl, libio-socket-ssl-perl, libipc-run3-perl, libisl23, libitm1, libjack-jackd2-0, libjbig0, libjemalloc2, libjpeg62-turbo, libjs-bootstrap4, libjs-jquery, libjs-popper.js, libjs-requirejs, libjs-underscore, libjson-glib-1.0-0, libjson-glib-1.0-common, liblab-gamut1, liblapack3, liblcms2-2, libldap-common, liblilv-0-0, liblocal-lib-perl, liblognorm5, liblsan0, libltdl7, liblua5.1-0, liblua5.3-0, liblvm2cmd2.03, liblwp-mediatypes-perl, libmagic-mgc, libmagic1, libmagickcore-6.q16-6-extra, libmagickcore-6.q16-6, libmagickwand-6.q16-6, libmailtools-perl, libmariadb3, libmaxminddb0, libmemcached11, libmenlo-perl, libmfx1, libminiupnpc17, libminizip1, libmodule-build-perl, libmodule-cpanfile-perl, libmp3lame0, libmpc3, libmpdec3, libmpfr6, libmpg123-0, libmysofa1, libncurses5, libncursesw5, libnet-dns-perl, libnet-http-perl, libnet-ip-perl, libnet-smtp-ssl-perl, libnettle8, libnewt0.52, libnghttp2-14, libnl-3-200, libnl-genl-3-200, libnspr4-dev, libnspr4, libnss-ldapd, libnss-myhostname, libnss3-dev, libnss3, libntlm0, libnuma1, libodbc1, libogg0, libonig5, libopendbx1-sqlite3, libopendbx1, libopenjp2-7, libopenmpt0, libopts25, libopus0, libpam-ldapd, libpango-1.0-0, libpangocairo-1.0-0, libpangoft2-1.0-0, libparse-pmfile-perl, libparted2, libpath-tiny-perl, libpathplan4, libpcap0.8, libpci3, libpciaccess0, libpcre16-3, libpcre3-dev, libpcre32-3, libpcre3, libpcrecpp0v5, libpcsclite1, libpipeline1, libpixman-1-0, libpng-dev, libpng16-16, libpocketsphinx3, libpod-parser-perl, libpopt0, libpq-dev, libpq5, libprotobuf-c1, libproxy1v5, libpsl5, libpulse0, libpython3.11-dev, libpython3.11-minimal, libpython3.11-stdlib, libpython3.11, libquadmath0, librabbitmq4, libraqm0, librbl1, librsvg2-2, librsvg2-bin, librsvg2-common, librubberband2, libsamplerate0, libsasl2-modules, libsdl2-2.0-0, libsensors-config, libsensors5, libserd-0-0, libsigsegv2, libslang2, libsmbclient, libsnappy1v5, libsndfile1, libsndio7.0, libsord-0-0, libsoup-gnome2.4-1, libsoup2.4-1, libspeex1, libsphinxbase3, libsratom-0-0, libss2, libssh-gcrypt-4, libssh2-1, libssl-dev, libstemmer0d, libstring-shellquote-perl, libsub-override-perl, libsys-hostname-long-perl, libtasn1-6, libthai-data, libthai0, libtheora0, libtie-handle-offset-perl, libtinfo5, libtool, libtry-tiny-perl, libtsan0, libubsan1, libudfread0, libunbound8, libunistring2, libunwind8, liburi-perl, libusb-1.0-0, libustr-1.0-1, libutempter0, libuv1, libva-drm2, libva-x11-2, libva2, libvbr2, libvdpau1, libvulkan1, libwavpack1, libwayland-client0, libwayland-cursor0, libwayland-egl1, libwayland-server0, libwbclient0, libwebpdemux2, libwebpmux3, libwmf0.2-7, libwoff1, libwrap0, libwww-perl, libx11-6, libx11-data, libx11-xcb1, libxaw7, libxcb-dri2-0, libxcb-dri3-0, libxcb-glx0, libxcb-present0, libxcb-render0, libxcb-shape0, libxcb-shm0, libxcb-sync1, libxcb-xfixes0, libxcb1, libxcursor1, libxdamage1, libxext6, libxfixes3, libxft2, libxi6, libxinerama1, libxkbcommon0, libxml2-dev, libxml2, libxmu6, libxmuu1, libxnvctrl0, libxpm4, libxrandr2, libxrender1, libxslt1.1, libxt6, libxtst6, libxv1, libxxf86dga1, libyaml-0-2, libyaml-dev, libz3-4, libzip4, libzmq5, libzvbi-common, libzvbi0, locales, logrotate, lsb-release, lsof, lua-bitop, lua-cjson, lua-event, lua-expat, lua-filesystem, lua-ldap, lua-lpeg, lua-sec, lua-socket, lua-zlib, lua5.3, lvm2, m4, mailcap, mailutils-common, mailutils, man-db, manpages-de, manpages-es, manpages-fr, manpages-it, manpages-pl, manpages-pt, mariadb-common, mariadb-server-10.5, mariadb-server, mawk, mdadm, media-types, memcached, mlock, mtr-tiny, mysql-common, nano, ncal, ncurses-base, net-tools, netcat-openbsd, nslcd-utils, nslcd, ntp, ntpdate, nvme-cli, ocl-icd-libopencl1, opendkim-tools, openssh-sftp-server, optipng, parted, pci.ids, pciutils, pdftk-java, php-common, php-mbstring, php-pear, php-php-gettext, php-xml, php7.0-cli, php7.0-common, php7.0-json, php7.0-mbstring, php7.0-opcache, php7.0-readline, php7.0-xml, php7.3-cli, php7.3-common, php7.3-curl, php7.3-fpm, php7.3-gd, php7.3-imagick, php7.3-intl, php7.3-json, php7.3-mbstring, php7.3-mysql, php7.3-opcache, php7.3-readline, php7.3-soap, php7.3-xml, php7.3-zip, php7.4-apcu, php7.4-bcmath, php7.4-bz2, php7.4-cli, php7.4-common, php7.4-curl, php7.4-fpm, php7.4-gd, php7.4-gmp, php7.4-igbinary, php7.4-imagick, php7.4-imap, php7.4-intl, php7.4-json, php7.4-ldap, php7.4-mbstring, php7.4-mysql, php7.4-opcache, php7.4-pgsql, php7.4-readline, php7.4-redis, php7.4-soap, php7.4-sqlite3, php7.4-xml, php7.4-zip, php8.0-cli, php8.0-common, php8.0-gd, php8.0-mbstring, php8.0-opcache, php8.0-readline, php8.0-xml, php8.1-cli, php8.1-common, php8.1-gd, php8.1-mbstring, php8.1-opcache, php8.1-readline, php8.1-xml, php8.2-bcmath, php8.2-cli, php8.2-common, php8.2-curl, php8.2-fpm, php8.2-gd, php8.2-igbinary, php8.2-imagick, php8.2-intl, php8.2-ldap, php8.2-mbstring, php8.2-mysql, php8.2-opcache, php8.2-pgsql, php8.2-phpdbg, php8.2-readline, php8.2-redis, php8.2-tidy, php8.2-xml, php8.2-zip, php8.2, php8.3-apcu, php8.3-bcmath, php8.3-bz2, php8.3-cli, php8.3-common, php8.3-curl, php8.3-fpm, php8.3-gd, php8.3-gmp, php8.3-igbinary, php8.3-imagick, php8.3-imap, php8.3-intl, php8.3-ldap, php8.3-mbstring, php8.3-mysql, php8.3-opcache, php8.3-readline, php8.3-redis, php8.3-xml, php8.3-zip, php8.3, pkg-config, pngquant, postfix-ldap, postfix-pcre, postfix-policyd-spf-perl, postfix-sqlite, postfix, postgresql, postsrsd, procmail, procps, psmisc, python-apt-common, python3-appdirs, python3-attr, python3-dateutil, python3-defusedxml, python3-distro-info, python3-freezegun, python3-future, python3-gevent-websocket, python3-ifaddr, python3-isodate, python3-pip, python3-prompt-toolkit, python3-pyasn1-modules, python3-pyasn1, python3-pygments, python3-pyinotify, python3-pyparsing, python3-requests-toolbelt, python3-tz, python3-wcwidth, python3-wheel, python3-zeep, python3.11-dev, python3.11-minimal, python3.11, redis-server, redis-tools, resolvconf, rsync, rsyslog, samba-common, samba-libs, screen, sed, sg3-utils, shared-mime-info, slapd, smartmontools, smbclient, socat, sudo-ldap, supervisor, sysstat, task-english, tasksel-data, tasksel, tcpdump, tzdata, unattended-upgrades, unzip, util-linux-locales, uuid-runtime, vim-common, vim-runtime, vim-tiny, vim, wamerican, wget, whiptail, whois, x11-common, xfsprogs, xxd, xz-utils, yunohost-admin, yunohost, zip
> Success! System upgraded
> ```

Faut que je file, merci encore ! Tu peux répondre je lirais le message à mon retour ! ou un mp si ca ne te derange pas.
Tres bon week-end et à bientot !
[18:07:59] <yvanq> C'est vrai que c'est bien yunopast pour des "petits" messages comme ça 🙄
[18:09:11] <Elzen> D'après le diagnostic, j'ai mon IP qui est arrivée en liste noire sur SenderScore Blacklist pour « Excessive Number of Queries ». Ce qui semble se produire quand on fait trop de vérifs de réputation. Perso n'ai touché à rien de spécial dans la conf', je suis censé faire quoi dans ce cas ?
[18:13:55] <Cam✨> ipv6 ou v4?
[18:14:11] <Elzen> La v4 visiblement.
[18:14:45] <Cam✨> j'avais un vps qui avait fini sur une blacklist parce qu'il y avait un serveur avec une ip très proche qui faisait du spam
[18:15:55] <Elzen> Là ça cause bien de mon IP, pas d'une IP proche, et il n'est manifestement question de spam nulle part, juste de trop de vérifications de réputations. Vérifs de réputations qui ont l'air automatiquement faites par l'outil de diagnostic sans que je n'aie rien demandé à ce sujet.
[18:29:14] <rodinux> > <Elzen> D'après le diagnostic, j'ai mon IP qui est arrivée en liste noire sur SenderScore Blacklist pour « Excessive Number of Queries ». Ce qui semble se produire quand on fait trop de vérifs de réputation. Perso n'ai touché à rien de spécial dans la conf', je suis censé faire quoi dans ce cas ?

ça ne veut peut-être rien dire... Tu peux tester ton mail ici https://www.mail-tester.com/
[18:31:51] <Elzen> Je ne cherche pas spécialement à tester mon mail, plutôt à ne pas me faire spammer de notifs du diagnostic par des trucs que le diagnostic a décidé de faire tout seul sans me demander mon avis.
[18:32:02] <Elzen> s/par/pour/
[18:33:50] <rodinux> la boîte est réputée pour escroquer des providers ou des self-hosters; les diagnostics c'est pour t'aider, tu devrais plutôt le voir d'un bon oeil, là c'est ce service qui est malhonnête, on avait déjà vu cela ici https://forum.yunohost.org/t/senderscore-blacklist-blocklist-because-of-excessive-number-of-queries/30395/16
[18:33:52] <denisapain> heyo, cron hourly seems to be failing, every hour I get a email from root@qilk.de with these contents (I have ~500 now)

```
/etc/cron.hourly/0:
run-parts: failed to exec /etc/cron.hourly/0: Exec format error
run-parts: /etc/cron.hourly/0 exited with return code 1
```
[18:37:11] <rodinux> > <Elzen> Je ne cherche pas spécialement à tester mon mail, plutôt à ne pas me faire spammer de notifs du diagnostic par des trucs que le diagnostic a décidé de faire tout seul sans me demander mon avis.

tu peux ignorer l'alerte de ce diagnostic...
[18:38:01] <Elzen> C'est la conclusion à laquelle j'en étais arrivé en lisant le topic sur le forum. Merci ! :-)
[18:38:05] <@err404:matrix.numericore.com> scanmy.email \<-- c'est pas mal aussi pour comprendre ce qui ne va pas dans les emails
[23:39:52] <denisapain> > <@denisapain:matrix.org> heyo, cron hourly seems to be failing, every hour I get a email from root@qilk.de with these contents (I have ~500 now)
>
> ```
> /etc/cron.hourly/0:
> run-parts: failed to exec /etc/cron.hourly/0: Exec format error
> run-parts: /etc/cron.hourly/0 exited with return code 1
> ```

can someone help please my inbox full :(