[00:28:42]
<da_animal> Hi
[00:32:28]
<ynhuser> Hey! I tried following to documentation at "https://yunohost.org/en/security?q=%2Fsecurity" - and it was working fine, however I'm now getting this error: "No supported authentication methods available (server sent: publickey)" and I was wondering if anyone would be willing to help?
[02:08:28]
<ynhuser> Hi! I tried setting up matrix with yunohost, however it seems the port is not reachable. I have checked in with my server host and firewall rules- and it all looks good. Does anyone know any other troubleshooting steps I can do to resolve this issue?
[05:54:33]
<bitrom[m]> Hi i really need to get this installed on my yunohostserver as a app. https://github.com/lnbits/lnbits-legend#lnbits is it complicated to build, not sure if i completly understand the guides..
[06:37:44]
<@navan=5bm=5d:libera.chat> > <@bitrom:matrix.org> Hi i really need to get this installed on my yunohostserver as a app. https://github.com/lnbits/lnbits-legend#lnbits is it complicated to build, not sure if i completly understand the guides..
If you can wait until the weekend, I can package it. I have too much homework to do during the week
[07:13:35]
<milosh> Bonjour, lors de la migration vers yunohost11/bullseye, ma machine s'est arrêtée à un mauvais moment. J'ai par la suite fait un "dpkg --reconfigure -a" qui a terminé les installations et mis à jour yunohost. Tout a l'air OK (lsb_release dit bullseye, yunohost -v dit 11.0.9 ou 11.0.10). Mais la migration est marquée encore à faire
[07:14:35]
<milosh> Et si j'essaie de relancer la migration (ou les suivantes, il refuse). Ça se résoud comment ?
[07:17:19]
<milosh> Le log de la mise à jour interrompue : https://paste.yunohost.org/raw/hokayayoqe
[08:46:29]
<Danillya> I just started with yunohost and installed plainpad, but how do I even use it? It asks for a e-mail + pw, but I haven't had a chance to create a user yet. Does someone know how to proceed?
[08:47:44]
<ines> hi, I forgot my password but there is no recovery option it seems. Anyone is familiar with this?
[09:52:03]
<@bitrom=5bm=5d:libera.chat> > <@navan:navan.dev> If you can wait until the weekend, I can package it. I have too much homework to do during the week
thats perfect! :) thanks again!
[10:05:18]
<ynhuser62> hey dear people, i am having trouble running the migration to debian 11. Apparently it fails because of dependencies for monica and nextcloud: https://paste.yunohost.org/raw/ufumevidox
[10:25:30]
<eric_G> Danillya: default credentials (found in the app README):
```
username: admin@example.org
password: 12345
```
[10:26:08]
<eric_G> cf: https://github.com/YunoHost-Apps/plainpad_ynh
[10:26:56]
<eric_G> of course, these are to be changed after the first connection
[10:29:55]
<ramfreeman[m]> Hey Guys, after i did an update and migrate to the new debian 11 I'm not able to log in to my admin interface(the log in bottom is not active) , only the user interface is worksing
This error apeared to me once
[10:30:14]
<ramfreeman[m]> * Hey Guys, after i did an update and migrate to the new Debian 11 I'm not able to log in to my admin interface(the log in bottom is not active) , only the user interface is working
This error appeared to me once
[10:30:56]
<ramfreeman[m]> > <@ramfreeman:matrix.org> Hey Guys, after i did an update and migrate to the new Debian 11 I'm not able to log in to my admin interface(the log in bottom is not active) , only the user interface is working
>
> This error appeared to me once
Update, after about 25 min it start working again.
[11:34:45]
<ramfreeman[m]> I tried many times but still not able to install Standard Notes Server
any advice on what to do
the log :
https://paste.yunohost.org/raw/uyuxeyofiq
[11:37:56]
<dynotiger> Hello and good day
[11:38:44]
<dynotiger> if I am using a subdomain as my main domain(sub.example.org), how does my DNS config change? https://yunohost.org/en/dns_config
[11:44:53]
<ramfreeman[m]> > <@dynotiger:libera.chat> if I am using a subdomain as my main domain(sub.example.org), how does my DNS config change? https://yunohost.org/en/dns_config
You write the sub domain in the name section.
For example if you use
Nextcloud.myname.com
You add a record
Name: Nextcloud
Ip: your ip4
[11:50:12]
<dynotiger> but if im using a dynamic IP, my DNS config is different right?
[11:53:16]
<ramfreeman[m]> > <@dynotiger:libera.chat> but if im using a dynamic IP, my DNS config is different right?
in this case this might help you
https://yunohost.org/en/dns_dynamicip
[11:55:46]
<dynotiger> @ramfreeman so I configured my dynamic DNS like that using this tutorial: https://letswp.justifiedgrid.com/cloudflare-as-dynamic-dns-raspberry-pi/
[11:56:15]
<dynotiger> but now I am stuck on the next step. I want to use Cloudflare Tunnel and I can't find a tutorial for it.
[12:44:58]
<dynotiger> in the tunnel config, for applications it asks: "Service: .." and then I need to point it to something. Is the something here: https:localhost:8001 ?
[14:12:30]
<mrtnz[m]> Hello everyone! Being on Yunohost 4.4.2.10 on RPi 2B I decided to make a migration to Yunohost based on the Debian 11. It didn't finish as I expected though, because of unmet dependencies - https://paste.yunohost.org/raw/havocudiyu. Then on the Yunohost documentation I found out that the Debian 11 based Yunohost is avaible only for 64-bits Raspberry Pis. I decided to Skip the migration in order to have following up-to-date iterations of Yunohost 4.X.X.X. Unfortunately when I am scanning for new updates in the System Update tab, there is plenty of updates that are part of migration, so successful update isn't possible. Do you know how I can get rid of these updates?
[14:12:45]
<mrtnz[m]> * Hello everyone! Being on Yunohost 4.4.2.10 on RPi 2B I decided to make a migration to Yunohost based on the Debian 11. It didn't finish as I expected though, because of unmet dependencies - https://paste.yunohost.org/raw/havocudiyu. Then on the Yunohost documentation I found out that the Debian 11 based Yunohost is available only for 64-bits Raspberry Pis. I decided to Skip the migration in order to have following up-to-date iterations of Yunohost 4.X.X.X. Unfortunately when I am scanning for new updates in the System Update tab, there is plenty of updates that are part of migration, so successful update isn't possible. Do you know how I can get rid of these updates?
[14:33:30]
<pinkprius> Hey I am trying to do a nginx reverse proxy on an existing ynh install. I have the redirect working mostly, only websockets don't seem to work. Any idea if ynh is in the way here?
[16:17:37]
<mongole> hi I installed mastodon and have set `RAILS_LOG_LEVEL=warn` but it is still spamming INFO messages to my syslog. any special setup for yunohost here?
[16:39:36]
<mongole> ok silly me. it has to go to .env.production file
[17:42:44]
<ynhuser> Hello. I have am encountering a reoccurring issue while installing apps. It first happened with Vaultwarden but it looks like NetData is affected too. They just keep getting stuck on install. Tried reinstalling the VPS OS several times and doing a clean install but nothing changed.
[17:46:45]
<ynhuser> Having issues uploading screenshots here so here are the links
[17:46:46]
<ynhuser> https://ibb.co/CVnHb96
[17:46:46]
<ynhuser> https://ibb.co/P18zGz0
[18:42:24]
<@titus=5bm=5d:libera.chat> ynhuser: Vaultwarden is a massive app to build, I assume your server is simply taking a long time to do so. I don't know about NetData.
[18:42:27]
<@titus=5bm=5d:libera.chat> Can you share some logs of your installation attempts?
[18:42:58]
<@titus=5bm=5d:libera.chat> Running the install commands with `--debug` might help you see what's happening
[18:45:17]
<@titus=5bm=5d:libera.chat> Marcin Wolski: check out the forum regarding the issue with `libc6-dev`. YunoHost is quite compatible with x32 RPis... do not confuse available images with actual compatibility.
[19:00:43]
<isAAAc> you can -teil -f /var/log/yunohost/<the good file> to watch when it stops working too
[19:00:46]
<isAAAc> watch *
[19:23:27]
<matlag> ynhuser You may also lack the RAM to build Vaultwarden. If that's the case, I would suggest temporary adding some swap space. There's a guide here https://www.digitalocean.com/community/tutorials/how-to-add-swap-space-on-debian-10 just skip the part to make it permanent (or keep it if you want!).
[20:44:16]
<wonko6x9> hey all. having issues with upgrading yunohost. i'm behind the curve. here is my error log: https://paste.yunohost.org/raw/awukikojux
[20:50:45]
<wonko6x9> this is an attempt to migrate to bullseye
[21:03:39]
<florent_alala[m]> Yes you have to remove ffsync before moving to bullseye
[21:07:32]
<ynhuser08> Hi there, it's been a while since I last checked yunohost, to my surprise forum.yunohost seems to been down for some reason... Does anyone know what's happening?
[21:10:40]
<florent_alala[m]> https://forum.yunohost.org is okay for me !
[21:12:04]
<wonko6x9> that would do it. thanks!
[21:20:50]
<isAAAc> +1 , the forum is up
[21:35:46]
<mrtnz[m]> > <@titus:pijean.ovh> Marcin Wolski: check out the forum regarding the issue with `libc6-dev`. YunoHost is quite compatible with x32 RPis... do not confuse available images with actual compatibility.
Thank you, I've just provided some information in the thread!