[07:07:09]
<Guillaume Bouzige> > <@archmatt:matrix.org> how should i set up it ?
there an issue open about that on ynh app repo. in the meantime copy and paste content of both certs in interface does it but you have to renew manually..
[17:41:45]
<alberto> I get the message "This site can’t be reached" and took too long to respond
[17:41:59]
<alberto> Has someone else found this issue or know how to fix it? Apologies if this is very dumb but this is the first time I am using YunoHost and I am still not very sure how this works
[17:42:27]
<alberto> Thank you for the time everyone:]
[17:43:48]
<tituspijean> alberto: welcome ! Can you explain further how you are trying to reach your website, if you performed the postinstall, if you use your own domain or one provided by YunoHost?
[17:44:16]
<alberto> Hi thank you for the answer
[17:45:01]
<alberto> I am using a domain provided by YunoHost until I know a little bit how the platform works
[17:46:28]
<alberto> And I am seeing on my admin on the SearX section that the URL of the application is
[17:46:29]
<alberto> https://alberto.nohost.me/searx but when I open in a new tab it gives the message I mentioned above
[17:51:02]
<alberto> Regarding the postinstall I have followed this guide: https://yunohost.org/en/install/hardware:rpi2plus and I believed it all went good
[17:55:44]
<甲> hallo
[17:57:42]
<tituspijean> alberto: indeed it's not responding either on my side. Is your public IP address starting by a 2.?
[17:58:28]
<tituspijean> You should check the diagnosis and make sure all ports are opened on your router
[17:58:36]
<alberto> Yes it starts by 2.152
[17:59:15]
<tituspijean> OK so it's not the dyndns failing. Most likely the ports :)
[17:59:22]
<alberto> Oh so I have to open the ports first and then it should work fine?
[17:59:38]
<tituspijean> (Mmmh not ALL ports)
[17:59:59]
<tituspijean> Yup, follow the tutorial in the documentation or follow the diagnosis advice
[18:00:21]
<tituspijean> Namely you need ports 80 and 443 to reach your server from outside
[18:00:39]
<alberto> @tituspijean Thank you I will open the ports I have mentioned on the diagnosis and will check again
[18:01:06]
<alberto> Thank you very much for all the help tituspijean
[18:01:33]
<alberto> Is there a kudos system on here I can give you a (y) or something??
[18:01:45]
<tituspijean> Gotta go, it's Christmas eve appetizers time. :)
Feel free to come back if the issue persists :)
[18:02:48]
<alberto> Thank you very much:) enjoy your Christmas Eve dinner:D
[18:04:47]
<tituspijean> > <@alberto:libera.chat> Is there a kudos system on here I can give you a (y) or something??
Nah just a thanks and enjoy YunoHost :)
[18:04:54]
<tituspijean> Thanks!
[18:13:03]
<alberto> tituspijean: thank you :)
[19:21:35]
<wayneoutthere> sweet. i finally joined the group. i was planning this for like 2 years. ha.
[19:21:47]
<wayneoutthere> first, you devs are the best. I've been promoting YH everywhere for years now. Love it.
[19:22:15]
<wayneoutthere> Second, is there a company out there or anyone who would support YH for a business that wants to get more serious rolling this out?
[19:23:04]
<wayneoutthere> My thought was since this stack has a legit email server, as long as email and server updates were properly handled things could probably be very secure and reliable even for a SMB?
[20:46:45]
<rehman> Hi
[20:47:04]
<rehman> I m new
[20:47:08]
<rehman> 🤔🤔🤔
[20:47:18]
<rehman> 1st time
[20:48:07]
<eric_G> welcome 🥳
[20:49:31]
<rehman> tituspijean, tituspijean:
[20:49:36]
<rehman> 😍
[20:50:17]
<abumshaal> مرحبا
[20:51:13]
<rehman> 👍
[21:12:35]
<somaa> Hi
[23:54:14]
<mjbruder> What's this chat group for?