Saturday, September 03, 2022
support@conference.yunohost.org
September
Mon Tue Wed Thu Fri Sat Sun
      1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
   
             

[00:00:59] <goober> I have the option to continue without bootloader, which... maybe that's fine, and will work?
[00:01:02] <goober> hi, sorry Aleks, off-hand I don't know how to get the log. I am chatting on another machine, YunoHost I'm trying to get on another machine
[00:01:03] <goober> mostly just not sure how to proceed
[02:28:07] <goober> ok I'm trying to install a 3rd time. I am going to try an expert graphical install in the hope that I can figure out the problem
[02:29:36] <goober> I have figured out paste.yunohost.org I think but I won't be able to copy the text output over... I will just write it into the paste bin
[02:32:25] <goober> I am trying to install LVM by the way. I turned off RAID in the BIOS because I thought that might be the issue. My second try did not involve the GRUB boot loader failing to load, but I still can't seem to boot :/
[07:23:42] <Guest893> Hi! I’m trying to set app as default for main address. It fails witg
[07:24:00] <Guest893> with the following log: https://paste.yunohost.org/raw/dovabozido
[09:35:33] <ynhuser> Le diagnostic ne remonte rien de problématique à part pour les emails mais je ne m'en sers pas et ces erreurs étaient déjà présentes avant la migration. Avez-vous des idées opur résoudre ça ?
[09:35:34] <ynhuser> Bonjour, mon serveur est inaccessible depuis l'exterieur depuis la migration vers bullseye et la maj yunohost. Je ne peux me connecter qu'en ssh ou via la web-admin en entrant directement l'ip de mon serveur.
[09:55:56] <ynhuser17> Bonjour à tous ! Lors de la migration de yunohost 4 à yunohost 11, j'ai eu des problèmes avec l'application nextcloud. J'essaie de la restaurer avec la sauvagarde avant mise à jour de l'application. La restauration pose un problème https://paste.yunohost.org/raw/umosuxocul. La commande ls -l /home/yunohost.multimedia/ renvoie :
[09:55:57] <ynhuser17> total 40
[09:55:58] <ynhuser17> drwxrwxr-x+ 7 antoine   root 4096  3 sept. 11:45 antoine
[09:55:59] <ynhuser17> drwxrwxr-x+ 6 charlotte root 4096  3 sept. 11:45 charlotte
[09:56:00] <ynhuser17> drwxrwxr-x+ 6 claire    root 4096  3 sept. 11:45 claire
[09:56:01] <ynhuser17> drwxrwxr-x+ 6 root      root 4096  3 sept. 11:45 gabriel
[09:56:01] <ynhuser17> drwxrwxr-x+ 6 clemence  root 4096  3 sept. 11:45 clemence
[09:56:02] <ynhuser17> drwxrwxr-x+ 6 jeanlouis root 4096 15 févr.  2022 jeanlouis
[09:56:03] <ynhuser17> drwxrwxr-x+ 6 laurent   root 4096 28 juin   2021 laurent
[09:56:04] <ynhuser17> drwxrwxr-x+ 8 root      root 4096 23 janv.  2021 share
[09:56:05] <ynhuser17> -rwxrwxr-x+ 1 root      root 2514 28 juin   2021 ynh_media_build.sh
[09:56:06] <ynhuser17> drwxrwxr-x+ 6 yun       root 4096 28 juin   2021 yun
[09:56:58] <titus[m]> Est-ce que `gabriel` est un utilisateur enregistré dans YunoHost,
[09:57:04] <titus[m]> * Est-ce que `gabriel` est un utilisateur enregistré dans YunoHost?
[09:58:41] <ynhuser17> oui, je l'ai bien dans la liste des utilisateurs de l'interface web. J'ai même essayé de modifier un paramètre de ce compte (mailbox quota) pour m'assurer que le compte était actif
[09:59:32] <titus[m]> en ligne de commande, peux-tu faire `sudo id gabriel`?
[09:59:56] <ynhuser17> sudo id gabriel
[09:59:57] <ynhuser17> id: « gabriel » : utilisateur inexistant
[10:00:51] <ynhuser17> Je ne sais pas si tout ça se réfère à des utilisateurs de debian ou des utilisateurs LDAP
[10:01:27] <titus[m]> oh wow, sacré problème en effet. Un utilisateur sur YunoHost est reflété à la fois dans LDAP et dans Unix/Debian. Et là c'est la partie Unix qui merdoie
[10:03:09] <ynhuser17> et si c'était une question de version du fichier de configuration ldap pendant la migration ? Je peux essayer de refaire une configuration "yunohost" du service LDAP avec les outils yunohost ?
[10:05:01] <titus[m]> A priori non. Est-ce que cet utilisateur peut être supprimé et recréé sans problème?
[10:05:43] <ynhuser17> oui, je peux essayer ça. Je le fais depuis l'interface web ?
[10:05:55] <titus[m]> La suppression normale ne touche pas aux emails et au dossier personnel dans /home/grabriel. En le recréant il devrait tout retrouver à sa place.
[10:05:57] <titus[m]> Oui!
[10:09:33] <ynhuser17> ok, maintenant ça donne : sudo id gabriel
[10:09:34] <ynhuser17> groupes=25965(gabriel),4002(all_users),5001(mail.main),5002(xmpp.main),40628(archivist.main),32339(collaboradocker.main),6997(etherpad_mypads.main),21728(ffsync.main),3751(opensondage.main),5647(strut.main),85046(thelounge.main),64678(multi_webapp.main),5644(ihatemoney.main),21715(qr.main),70625(shaarli.main),6244(domoticz.main),83587(grafana.main)
[10:09:34] <ynhuser17> uid=25965(gabriel) gid=25965(gabriel)
[10:09:48] <titus[m]> ça devrait être bon :)
[10:09:54] <ynhuser17> merci beaucoup beaucoup ! Je vais tenter de relancer la restauration !
[10:10:19] <ynhuser17> un grand merci tituspijean. J'avais peur d'effacer les mails/fichiers !
[10:10:33] <titus[m]> Si jamais tu peux partager les logs de la migration aussi, au cas où, on pourrait tenter de comprendre ce qu'il s'est mal passé
[10:11:17] <titus[m]> je crois qu'il y a une case à cocher dans la webadmin, et il y a l'option `--purge` quand on passe par la ligne de commande pour vraiment supprimer toutes les données d'un utilisateur
[10:11:57] <titus[m]> ynhuser17: par contre ça a dû réinitialiser ses permissions, si jamais il en avait des particulières.
[10:13:00] <ynhuser17> j'avais un problème avec les dépendances python de firefoxsync. Mais j'ai travaillé comme un bourrin avec des apt full-upgrade, et je ne sais pas si j'ai bien répondu aux questions sur les fichiers de configuration "édités manuellement". Je ne suis pas sûr du coup que mes logs soient très instructifs :(
[10:13:29] <titus[m]> ffsync est déprécié, c'est mentionné dans l'annonce de la sortie de YunoHost 11
[10:13:45] <ynhuser17> (oui, il y a une option pruge avec une case à cocher : c'est très bien fait)
[10:19:01] <ynhuser17> oui, à cause de firefox sync, j'avais des dépendances insatisfaites qui empêchaient la mise à jour des paquets par apt. C'est en enlevant le paquet "virtuel" des dépendances de firefox sync que j'ai pu finir la mise à jour vers Debian bullseye
[10:24:30] <orage[m]> Aleks: https://paste.yunohost.org/raw/kurikodara
[10:27:02] <Alekswag[m]> orage: zblerg oké du coup le machin qui est censé résoudre le pb de libc6truc a derpé à cause de equivs/yunohost, genre ça n'a quasi pas de rapport ~_~
[10:27:21] <Alekswag[m]> du coup essayons de le forcer avec:

```
LC_ALL=C DEBIAN_FRONTEND=noninteractive APT_LISTCHANGES_FRONTEND=none sudo apt install --quiet -o=Dpkg::Use-Pty=0 --fix-broken --assume-yes gcc-8- libgcc-8-dev- equivs yunohost
```
[10:27:33] <Alekswag[m]> * du coup essayons de le forcer avec:

```
LC_ALL=C DEBIAN_FRONTEND=noninteractive APT_LISTCHANGES_FRONTEND=none sudo apt install --quiet -o=Dpkg::Use-Pty=0 --fix-broken --assume-yes gcc-8- libgcc-8-dev- equivs yunohost --dry-run
```
[10:27:41] <Alekswag[m]> (et `--dry-run` a la fin)
[10:27:53] <orage[m]> The following packages have unmet dependencies:
dh-autoreconf : Depends: libtool (>= 2.4.2) but it is not going to be installed
nextcloud-ynh-deps : Depends: smbclient but it is not going to be installed
yunohost : Depends: moulinette (>= 11.0) but 4.4.1 is to be installed
Depends: ssowat (>= 11.0) but 4.4.1 is to be installed

[10:30:26] <Alekswag[m]> moé je mdisais bien, du coup essayons avec juste equivs:
[10:30:44] <Alekswag[m]> ```
LC_ALL=C DEBIAN_FRONTEND=noninteractive APT_LISTCHANGES_FRONTEND=none sudo apt install --quiet -o=Dpkg::Use-Pty=0 --fix-broken --assume-yes gcc-8- libgcc-8-dev- equivs --dry-run
```
[10:31:15] <orage[m]> done
[10:31:36] <Alekswag[m]> ça a marché ?
[10:31:45] <orage[m]> oui
[10:31:48] <Alekswag[m]> enfin atta c'était que le `--dry-run`
[10:32:00] <Alekswag[m]> dans ce cas sans le `--dry-run`
[10:32:00] <orage[m]> pas l'air d'avoir eu d'erreurs
[10:32:08] <Alekswag[m]> ```
LC_ALL=C DEBIAN_FRONTEND=noninteractive APT_LISTCHANGES_FRONTEND=none sudo apt install --quiet -o=Dpkg::Use-Pty=0 --fix-broken --assume-yes gcc-8- libgcc-8-dev- equivs
```
[10:40:03] <ynhuser> J'ai une question svp : est-il possible d'installer ses propres scripts (docker ou pas) sur le serveur ? Merci
[10:41:20] <titus[m]> ça dépend quels scripts. Docker devrait bien s'arranger avec YunoHost, faisant son truc dans son coin, tant que tu squattes pas les ports standards. Tu peux même utiliser l'app Redirect pour faire du reverse_proxy de conteneurs
[10:43:02] <ynhuser> Il ne faut pas installer un module spécial pour les scripts qu'on veut héberger ?
[10:43:02] <ynhuser> Merci
[10:43:13] <titus[m]> > <@ynhuser:libera.chat> Il ne faut pas installer un module spécial pour les scripts qu'on veut héberger ?

Il faut préciser de quoi tu parles s'il te plaît.
[10:43:57] <ynhuser> Je souhaiterais faire tourner un script python ou 2...
[10:44:46] <titus[m]> déclenchés comment?
[10:44:46] <ynhuser> Je pensais qu'il fallait d'abord installer un manager d'images dockers, puis d'installer notre script via ca
[10:45:11] <titus[m]> ah non tu peux les faire tourner à la mano en les stockant dans ton dossier utilisateur par exemple
[10:45:34] <titus[m]> après pour les lancer il faut bidouiller un peu. On a pas d'app gérant des scripts de manière générique
[10:46:31] <titus[m]> en gros tant que tu touches pas à YunoHost et son système , tu peux installer presque ce que tu veux sur ton serveur. C'est l'intégration dans YunoHost qui peut être moins évidente. Mais sinon ça peut tourner comme Docker dans son coin sans problème.
[10:46:31] <ynhuser> Ah OK. OK. Et s'ils ont un install en docker ça ira aussi ? Suis débutant hein 😊
[10:46:48] <titus[m]> Normalement oui.
[10:47:01] <ynhuser> Je dois donc installer docker hors de yuno ?
[10:47:50] <ynhuser> Ou bien c'est déjà fait puisque on installe yuno grâce à docker ?
[10:48:04] <titus[m]> > <@ynhuser:libera.chat> Ou bien c'est déjà fait puisque on installe yuno grâce à docker ?

non.
[10:48:04] <titus[m]> Tu peux installer Docker sur le même serveur que YunoHost. Tant que tes conteneurs n'essaient pas de squatter les ports 80, 443, etc. ça devrait aller.
[10:48:58] <ynhuser> Ah OK donc pour chaque script je devrai définir d'autres ports c ça ?
[10:49:30] <titus[m]> Montre un exemple de script, on tourne en rond :)
[10:49:44] <ynhuser> Flûte désolé
[10:50:04] <titus[m]> (partage un lien, ne copie+colle pas le script ici... :p)
[10:50:28] <ynhuser> Je voudrais faire tourner un script github. Crypto signals. 😉
[10:50:37] <ynhuser> Attends je cherche
[10:51:53] <ynhuser> https://github.com/laliux/telegram-crypto-signals
[10:52:00] <ynhuser> Par exemple
[10:53:01] <ynhuser> C un script sympa 😉
[10:53:26] <ynhuser> Mais je devrai voir quel port il utilise
[10:54:11] <titus[m]> Moui... on évitera de discuter de l'intérêt des cryptomonnaies ici.
[10:54:26] <titus[m]> A priori ça n'expose pas de port, donc ça devrait tourner tranquille dans son coin
[11:00:04] <ynhuser> OK merci bcp
[11:00:05] <titus[m]> oui
[11:00:05] <titus[m]> oui (mais t'es parti...)
[11:00:05] <titus[m]> expose*
pas explose ;)
[11:00:05] <ynhuser> Quand vous dites, ça n'explose pas de port, ça veut dire qu'il n'utilise pas un des ports de base 80 etc...?
[11:02:29] <titus[m]> maranda[m]: are you still tuning the bridge? why am I the only one have messages mirrored back in here through XMPP, and with such delay?
[11:02:51] <titus[m]> * maranda[m]: are you still tuning the bridge? why am I the only one having messages mirrored back in here through XMPP, and with such delay?
[11:04:12] <titus[m]> ohgosh
[11:25:47] <Alekswag[m]> dejavu ?
[11:25:47] <titus[m]> there's a XMPP bridge running somewhere I guess... but 20 min delay... wow
[11:25:47] <Alekswag[m]> uuuuh
[11:27:02] <orage[m]> Aleks: yunohost Wizard ! Alors, la migration c'est bien passée... Par contre la base de donnée de fail2ban à l'air corrompue, je peux simplement faire un dpkg --reconfigure ?
[11:27:15] <Alekswag[m]> de fail2ban x_X
[11:27:24] <Alekswag[m]> fail2ban n'a pas de base de données ...
[11:27:34] <Alekswag[m]> c'est quoi le full message d'erreur
[11:32:20] <SuShY> Aleks salut, question Gitea, faut faire un paramétrage complémentaire pour accéder au dépot en SSH ? J'ai mis ma clé dans mes préférence, mais au moment du push en local vers gitea j'ai une erreur de permission
[11:33:01] <SuShY> gitea@mon_domaine.org: Permission denied (publickey).
[11:33:09] <Alekswag[m]> aucune idée, je connais pas grand chose à Gitea, je sais pas pourquoi tu me ping moi en particulier, j'ai pas le monopole du support ...
[11:34:21] <orage[m]> > <@Alekswag:matrix.org> aucune idée, je connais pas grand chose à Gitea, je sais pas pourquoi tu me ping moi en particulier, j'ai pas le monopole du support ...

https://paste.yunohost.org/raw/wileximowu
[11:35:01] <SuShY> Aleks ok bien noté
[11:36:01] <Alekswag[m]> `database disk image is malformed` wat do fok
[11:36:49] <Alekswag[m]> mwé apparament y'a vraiment un DB en fait :D
[11:36:51] <Alekswag[m]> `cp -a /var/lib/fail2ban/fail2ban.sqlite3{,.bkp}`
[11:37:03] <Alekswag[m]> `rm /var/lib/fail2ban/fail2ban.sqlite3`
[11:37:09] <Alekswag[m]> (enfin avec `sudo` si t'es pas en root..)
[11:37:12] <Maranda> titus[m]: 🤔
[11:37:30] <Maranda> Are you on IRC
[11:37:55] <Maranda> NM
[11:38:30] <Maranda> titus[m]: and no, probably the bridge is just having a fit
[11:39:30] <Maranda> And are you using #yunohost:matrix.org
[11:39:40] <Maranda> Or the wrong room
[11:39:57] <Maranda> Looks like you're using the wrong Libera room
[11:40:36] <Maranda> Hence the: titus[m]
[11:41:50] <titus[m]> SuShY: cette fonctionnalité n'est pas encore prise en charge
[11:41:58] <titus[m]> maranda[m]: I'm on Matrix, but using the #yunohost:libera.chat room
[11:42:29] <titus[m]> the fit is leaking to the app packaging room
[11:42:29] <SuShY> tituspijean c'est à dire ?
[11:42:29] <Maranda> Which is wrong
[11:42:58] <SuShY> titus[m] cela fonctionnait avant il me semble
[11:43:27] <titus[m]> SuShY: si tu peux retrouver à quelle version cela remonte, on pourra regarder
[11:43:45] <SuShY> cella juste avant la dernière en prod
[11:44:00] <SuShY> car je synchronisé uniquement en ssh
[11:44:03] <titus[m]> je raconte n'importe quoi désolé... ça devrait marcher en effet: https://github.com/YunoHost-Apps/gitea_ynh/blob/6c7d27760137d27ea88c843390c4dbefd7fadb74/scripts/install#L71
[11:44:42] <titus[m]> maranda[m]: should Matrix users use the :matrix.org one?
[11:44:43] <SuShY> tituspijean yes, je pense que c'est une historie de permission non déployée pour l'utilisateur gitea
[11:45:15] <SuShY> du coup à corriger à la main ?
[11:45:42] <SuShY> ajouter le user gieta au group ssh.app non ?
[11:46:10] <titus[m]> > <@titus:pijean.ovh> maranda[m]: should Matrix users use the :matrix.org one?

wait it's bugging over #yunohost-apps:matrix.org but I'm using the matrix one on there
[11:46:29] <titus[m]> > <@SuShY:libera.chat> ajouter le user gieta au group ssh.app non ?

vérifie `sudo id gitea`
[11:46:41] <Maranda> titus[m]: as I said multiple times the #yunohost:libera.chat room should not be used #yunohost:matrix.org is already bridged to the chat on Libera
[11:47:30] <SuShY> tituspijean sudo id gitea
[11:47:32] <SuShY> uid=990(gitea) gid=990(gitea) groups=990(gitea),1002(ssh.app)
[11:47:40] <orage[m]> > <@Alekswag:matrix.org> `rm /var/lib/fail2ban/fail2ban.sqlite3`

même erreur
[11:49:25] <titus[m]> > <@maranda[m]:libera.chat> titus[m]: as I said multiple times the #yunohost:libera.chat room should not be used #yunohost:matrix.org is already bridged to the chat on Libera

I missed that. But anyways, what's up with #yunohost-apps:matrix.org ? Thanks again for the support, I know it's hell...
[11:49:44] <titus[m]> (joining the :matrix.org one... waiting for federation)
[11:51:01] <Maranda> titus[m]: I think the bridge POD on the Kubernetes cluster could have been evicted
[11:51:46] <Maranda> Those doubles tend happening only on restarts or reconnects to the XMPP server
[11:52:29] <Maranda> And/or it crashed
[11:52:42] <Maranda> Result is the same 😅
[11:53:21] *titus[m] noting: "xmpp restarts looks like crashes" 😝
[11:54:27] <Maranda> titus[m]: Metronome uses 100% CPU on a bridge restart but doesn't look to crash
[11:54:59] <Maranda> So maybe I also sorted that on 4.0.0
[11:55:29] <tituspijean> Alright I'm back in the right room. I can haz adminship in here? Alekswag[m] ?)
[11:56:00] <Maranda> You're already
[11:56:37] <tituspijean> Mmmh... I'll let the federation finish then, the side menu tells me I'm not
[11:56:52] <Maranda> Regarding YuNoHost you need to test mod_auth_ldap compatibility
[11:57:02] <Alekswag[m]> > <@maranda[m]:libera.chat> titus[m]: as I said multiple times the #yunohost:libera.chat room should not be used #yunohost:matrix.org is already bridged to the chat on Libera

ugh but if i remember correctly we advised everybody to move to the libera chat room instead of the matrix one ? x_x
[11:57:22] <Maranda> I'd Need to check if it works on lua5.3
[11:57:35] <Maranda> > <@Alekswag[m]:libera.chat> > <@maranda[m]:libera.chat> titus[m]: as I said multiple times the #yunohost:libera.chat room should not be used #yunohost:matrix.org is already bridged to the chat on Libera
>
> ugh but if i remember correctly we advised everybody to move to the libera chat room instead of the matrix one ? x_x

That was wrong
[11:57:36] <tituspijean> > <@Alekswag[m]:libera.chat> > <@maranda[m]:libera.chat> titus[m]: as I said multiple times the #yunohost:libera.chat room should not be used #yunohost:matrix.org is already bridged to the chat on Libera
>
> ugh but if i remember correctly we advised everybody to move to the libera chat room instead of the matrix one ? x_x

that was before Maranda swooped in and saved the day :)
[11:58:48] <Maranda> tituspijean: is it possible to run apps as docker containers in YuNoHost? Or just LXD?
[11:59:37] <tituspijean> there's no YunoHost Docker app, but they play along mostly nicely, as long as the containers don't try to use ports needs by YunoHost. Oh wait... XMPP.
[11:59:55] <Maranda> Containerizing Metronome would solve a *lot* of the Lifecycle issues
[12:00:20] <SuShY> tituspijean sudo id gitea
[12:00:23] <SuShY> uid=990(gitea) gid=990(gitea) groups=990(gitea),1002(ssh.app)
[12:03:54] <Maranda> tituspijean: I added a Dockerfile just recently and I don't think that would get in the way too much in adding the custom plugins over there
[12:48:31] <Lightnin> Hello - just tried migration to 11 after running manual fix for libc6 issue, but migration still fails with: + libc6-dev : Breaks: libgcc-8-dev (< 8.4.0-2~) but 8.3.0-6+rpi1 is to be installed
[12:52:26] <Lightnin> Last step of solution described here: https://forum.yunohost.org/t/migration-to-11-wont-start-libc6-dev-breaks-libgcc-8-dev/20617/42 , which is: sudo apt remove gcc-8 libgcc-8-dev, results in:
[12:53:39] <Lightnin> https://pastebin.com/mwwdjVgx
[13:58:32] <Alekswag[m]> please share the full log of the migration ...
[14:08:21] <goober> I am currently in the partitioner, trying to get Yunohost installed on an old machine. I am a little out of my depth however
[14:09:16] <goober> the guided partitioning doesn't seem to help. I just want an encrypted LVM but I can't seem to figure out what I need to do. any guides out there?
[14:13:15] <fugazzipl> Bonjour / hello
[14:13:18] <fugazzipl> forum.yunohost.org is down ?
[14:20:40] <anubis> fugazzipl, chez moi ça marche
[14:27:36] <fugazzipl> Oh, c'est le seul site qui me semble hors d'atteinte chez moi.
[14:28:26] <fugazzipl> "Le serveur à l’adresse forum.yunohost.org met trop de temps à répondre."
[14:28:46] <fugazzipl> Merci pour la réponse anubis
[14:31:39] <fugazzipl> Je voulais aller sur le forum pour comprendre le message d'erreur posé lors de l'installation de "libreqr"
[14:31:40] <fugazzipl> "Les pré-requis de LibreQR ne sont pas satisfaits, le paquet yunohost (4.4.2.13) doit être >= 11"
[14:33:35] <fugazzipl> J'ai eu le même message d'erreur en 4.3.6.x. :'(
[14:37:30] <Alekswag[m]> il faut passer à Bullseye ...
[14:45:24] <fugazzipl> ah, ben j'avais pas vu la migration. Merci Aleks[m]. :D
[14:49:16] <fugazzipl> ah, je suis en 10.12
[14:53:04] <goober> alors mon troisìème effort à installer Yunohost sur une machine a terminé en échec :(
[14:53:24] <goober> I'm looking at the troubleshooting guide and it's telling me to avoid the reinstallation spiral
[14:53:50] <brutusbondbtc[m]> Hi guys. I run an instance of yunohost on bitlaunch. I'm trying to add a couple of domains, but I'm a little confused by the documentation. If I add another domain for NextCloud, do I add a new A record in namecheap like this?

* 3600 IN A 162.33.178.66
[14:55:54] <goober> is anyone in a position to help a newbie out? I have had trouble with GRUB and with partitioning... I basically just don't really understand what I need to be doing to make the install work
[15:13:46] <fugazzipl> Hello goober, je ne sais pas si je peux aider, mais ton partitionnement ne me parle pas. quelle est la configuration ?
[15:13:50] <fugazzipl> https://yunohost.org/fr/install
[15:40:54] <tag[m]> > <@ynhuser:libera.chat> https://github.com/laliux/telegram-crypto-signals

en soit tu pourrais en faire une app
[15:41:00] <tag[m]> ah, il est parti ^^
[15:41:17] <tituspijean> 😅
[15:41:38] <tituspijean> On peut utiliser #yunohost:matrix.org au fait ;)
[15:42:05] <Tag> Mmmh quelle différence fondamentalement ?
[15:42:21] <Tag> On a la main niveau admin ici et pas sur :libera.chat c'est ça ?
[15:42:56] <titus[m]> Là tu fais Matrix->IRC->Matrix. On est admins sur Matrix, mais on "que" modos sur libera.chat, mais avec les droits suffisants pour tenir une room
[15:44:00] <Tag> Ok. M'enfin qu'on soit dans une salle ou l'autre, on fait Matrix->IRC->Matrix, comme il ya deux salles :p
[15:44:07] <Tag> C'est le même bot qui nous relaie ?
[15:44:57] <titus[m]> Yep
[15:45:19] <tituspijean> Voilà c'est mieux :)
[15:45:43] <Tag> marrant que ce soit le même bot dans deux salles "différentes"
[15:46:02] <tituspijean> @BloggingBitcoin, with a handle like that I prefer to warn you, if you spam you get banned. Welcome, still.
[15:46:18] <Tag> https://aria.im/_matrix/media/v1/download/lostpod.me/PsWpwIvkGrXrwvxxnpPIpVhg
[15:46:31] <Tag> marrant le :libera.chat alors que je suis dans la room matrix etc...
[15:46:51] <tituspijean> Voilà le genre de mille-feuille qui donne mal à la tête ^^
[15:49:07] <tituspijean> @tituspijean écrit dans la salle :matrix.org, qui se fait relayer sur IRC chez :libera.chat, qui est aussi relayé sur matrix dans la salle de la même adresse avec un puppet-account adjoint de `[m]` et qui est réaffiché sur un client matrix
[15:49:35] <Tag> terrible
[15:51:55] <freetux[m]> Hello, je suis en train d’essayer dendrite sur ma VM là, ça semble bien fonctionner, par contre pas avec l’instance synapse sur la même VM, quand j’essaye de faire une discussion entre 2 comptes j’ai ce message : « Impossible de rejoindre Failed to make_join via any server”, il y a des raison pour que synapse et dendrite cohabitent mal ?
[15:53:22] <tituspijean> Une sombre histoire de .well-known qui peut pas pointer sur deux serveurs? Il me semblait avoir déconseillé ce genre d'installation ^^
[15:54:07] <freetux[m]> J‘avais le même pb avec 2 synapse sur la même VM.
[15:54:10] <tituspijean> regarde les logs des deux serveurs, ils devraient dire plus précisément ce qui coince.
[15:54:26] <tituspijean> cela ne m'étonne pas, vraiment.
[15:54:35] <freetux[m]> Mais là avec dendrite j’étais plus optimiste. ^^
[15:54:38] <freetux[m]> Mais je le suis encore trop semble-t’il.
[15:56:49] <freetux[m]> 2022-09-03 15:55:47,931 - synapse.http.federation.matrix_federation_agent - 364 - INFO - GET-48346- Failed to connect to matrix.domain.tld:8448: DNS lookup failed: no results for hostname lookup: matrix.domain.tld.

[15:57:34] <tituspijean> Que te dit le federation tester? https://federationtester.matrix.org/
[15:57:43] <tituspijean> (pour les deux serveurs?)
[16:01:11] <tituspijean> freetux: et qu'as-tu configuré comme serveur "d'apparence" pour les deux?
[16:01:23] <tituspijean> et même chose chez Dendrite?
[16:05:46] <freetux[m]> Depuis Synapse il arrive pas à faire le lien vers dendrige quand je fais une demande d’ajout de contact.
[16:05:47] <freetux[m]> A priori rien dans les logs de dendrite.
[16:06:41] <tituspijean> > <@freetux[m]:libera.chat> A priori rien dans les logs de dendrite.

C'est dans /var/log/dendrite/Monolith.log. Il est possible que j'ai mis le mauvais fichier dans la conf du service
[16:07:46] <freetux[m]> dans dendrite.log j’ai des choses tout de même, il est pas vide.
[16:09:36] <freetux[m]> Y’a pas l’air d’y avoir de grosses erreur dans dendrite, du moins pas comme ceux de synapse.
[16:11:50] <freetux[m]> Bah je vais virer dendrite, tant pis.
[16:12:22] <tituspijean> et tu as installé dendrite sur matrix.domain.tld,
[16:12:41] <freetux[m]> Yep.
[16:12:57] <freetux[m]> Et Synapse sur un matrix.domain2.tld.
[16:13:35] <tituspijean> et quand tu `ping matrix.domain.tld`, ça te retourne localhost ou 127.0.0.1 je suppose?
[16:13:46] <tituspijean> (aucune idée si c'est ça le soucis)
[16:14:29] <freetux[m]> Nan, c’est bien l’IP de ma VM.
[16:14:40] <tituspijean> (je viens de G**gler le problème, évidemment c'est notre forum en tête de la liste xD)
[16:15:07] <freetux[m]> J’avais vu ton issue pour l’IP des terminaux connectés, j’ai pareil en 127.0.0.1.
[16:15:40] <tituspijean> C'est pas bien grave celui-ci, juste gênant si tu as un doute sur l'authenticité d'une session
[16:15:55] <freetux[m]> Mouarf. ^^
[16:16:18] <freetux[m]> Mais comme t’as dit tout à l’heure, mon pb ça doit être lié au well-known ayant la même IP.
[16:16:25] <freetux[m]> Ils doivent pas aimer ça.
[16:16:39] <freetux[m]> Oui ça empêche pas d’utiliser le compte.
[16:16:50] <tituspijean> J'en suis moins sûr après avoir vu le log. Il semble très bien savoir où s'adresser
[16:17:00] <tituspijean> quoique... peux-tu vérifier le port utilisé par Dendrite?
[16:17:33] <tituspijean> Il devrait être dans `yunohost app setting dendrite port`
[16:17:48] <fugazzipl> Merci tout le monde, mon problème est résolu (sauf accès au forum, mais je testerai une autre fois ou d'une autre machine, mais plus tard)
[16:17:48] <fugazzipl> Bonne continuation à vous. :)
[16:18:09] <tituspijean> 👋
[16:19:15] <freetux[m]> `yunohost app setting dendrite port` et le diagnostique me donnent pas les mêmes ports pour dendrite.
[16:19:33] <tituspijean> ah.gif
[16:19:39] <freetux[m]> 8009 et 8449
[16:20:04] <tituspijean> et synapse cherche dendrite sur le 8448
[16:20:15] <tituspijean> euh pardon
[16:20:19] <freetux[m]> Synapse c’est 8448 ouais.
[16:20:43] <tituspijean> `yunohost app setting dendrite tls_port`
[16:21:01] <freetux[m]> 8449.
[16:21:05] <freetux[m]> * \8449.
[16:21:16] <tituspijean> OK. Donc c'est Synapse qui ne sait pas que Dendrite est sur le port 8449
[16:21:19] <freetux[m]> (chiant le bug d’element quand on tape un 8 en 1re caractère…)
[16:21:29] <tituspijean> 8449
[16:21:32] <tituspijean> il y a un bug?
[16:21:36] <tituspijean> 8 je vois pas
[16:21:41] <freetux[m]> 8449
[16:21:50] <freetux[m]> Plus maintenant. 😅
[16:22:00] <freetux[m]> Mais j’ai souvent un pb d’affichage quand je tape un chiffre en premier.
[16:22:14] <tituspijean> Mais par exemple je n'arrive pas à sélectionner le message qui a bugué
[16:22:21] <tituspijean> > <@freetux[m]:libera.chat> 8449.

^
[16:22:33] <tituspijean> Il a un petit caractère avant le 4
[16:22:43] <freetux[m]> Ah Ouais, c’est le 8 qui bug.
[16:22:53] <freetux[m]> Tout à l’heure je voyais que 49 moi.
[16:23:21] <tituspijean> `"formatted_body": "<ol start=\"8449\">\n<li></li>\n</ol>\n"`
Il croit que c'est une liste
[16:24:20] <tituspijean> ooooh non! Il croit que c'est le 8449ème élement d'une liste
car tu aurais mis un point à la fin du nombre?
[16:24:22] <tituspijean> 8449
[16:24:30] <tituspijean> 8449.
[16:24:35] <tituspijean> ^ répliqué
[16:24:39] <freetux[m]> Bingo.
[16:24:56] <tituspijean> mais bon, il devrait quand même afficher `8449.`
[16:25:00] <freetux[m]> (j’ai des toc avec la ponctuation 😅).
[16:25:26] <tituspijean> sauf s'il cappe le nombre d'items max à 99 et ça overflow vers des caractères qui sont pas des chiffres
[16:25:28] <tituspijean> fascinant
[16:26:07] <tituspijean> 7449.
[16:26:28] <tituspijean> wow... bref. ^^
[16:27:13] <tituspijean> Est-ce que du coup le port TLS de Dendrite est bien 8449 quand tu le passes sur Federation Tester?
[16:27:28] <tituspijean> (genre qu'il ne teste pas Synapse en pensant s'adresser à Dendrite...)
[16:29:05] <freetux[m]> Oui, c’est bien 8449.
[16:29:20] <tituspijean> très bizarre
[16:30:06] <tituspijean> > <@titus:pijean.ovh> freetux: et qu'as-tu configuré comme serveur "d'apparence" pour les deux?

j'ai pas fait gaffe, tu as répondu quoi à ça?
[16:30:56] <freetux[m]> Pour le Synapse c’est matrix.domain.tld (c’était pas possible encore à l’époque), et le 2nd j’ai testé les 2 possibilité, pareil.
[16:31:23] <freetux[m]> D’ailleurs j’ai pas réussi sur dendrite on dirait à avoir juste domaindendrite.tld, ça m’a quand même mis matrix.domaindendrite.tld pour le compte.
[16:31:58] <tituspijean> euh wow...
[16:32:28] <tituspijean> Bon clairement ils sont pas prêts à cohabiter, mais ça me semble venir de la conf de Dendrite
[16:34:08] <freetux[m]> Ça m’avait fait exactement pareil il y a quelques mois quand j’ai voulu avoir 2 instances synapse.
[16:35:47] <tituspijean> peux-tu partager le contenu des fichiers .well-known des deux domaines?
[16:35:55] <tituspijean> je te cherche leur noms et emplacements
[16:37:57] <tituspijean> `/etc/nginx/conf.d/domaindendrite.tld.d/dendrite_server_name.conf` ou `/etc/nginx/conf.d/matrix.domain.tld.d/synapse_server_name.conf`
[16:42:37] <freetux[m]> https://paste.centos.org/view/3774ec67
[16:43:02] <freetux[m]> (je me suis battu avec vim pour copier le texte, quel enfer, je suis finalement passé sur nano. ^^)
[16:43:23] <tituspijean> (nano c'est très bien)
[16:43:31] <tituspijean> 🥷
[16:43:54] <freetux[m]> Je connais pas du tout, première fois que j’utilise, mais j’ai pu quitter le fichier snas lire un wiki. 🥳
[16:45:05] <tituspijean> je donne ma langue au chat pour l'instant ; je ne vois pas où est le problème. :(
[16:49:50] <scjensen> hey! I came across this on the forum. I've been having some trouble with an install. https://forum.yunohost.org/t/error-when-i-get-to-the-partitioning-step-of-the-graphical-install/15255
[16:50:50] <scjensen> I think I have the same problem. I am not sure what commands I could use in terminal to erase all the data on the disk tho? I'm not too skilled with Linux yet...
[16:52:02] <tituspijean> > <@scjensen:libera.chat> I think I have the same problem. I am not sure what commands I could use in terminal to erase all the data on the disk tho? I'm not too skilled with Linux yet...

as stated in the answer of the thread, you should try a live usb distro for handling that
[16:52:39] <tituspijean> https://gparted.org/livecd.php is a good one, and no need for command line :)
[16:53:04] <tituspijean> once the hard drive is erased, use the YunoHost install disk ;)
[16:55:01] <scjensen> ok!
[17:06:47] <tmenon[m]> Hello, la dernière maj de mes apps ne c'est pas bien passé. Du coup j'ai restauré mon dernier snapshot et tout est bon sauf mon serveur Mastodon qui ne fonctionne plus j'ai la page d'erreur de Mastodon. Et j'ai ruby /var/www/mastodon/live/vendor/bundle/ruby/3.0.0/bin/puma (config/puma.rb) J'ai 3 process Puma de Mastodon qui me mange 100% du CPU.
Voici les logs de matodon-streaming : https://paste.yunohost.org/resunahano
[17:07:48] <tmenon[m]> Et celui de mastodon-sidekid : https://paste.yunohost.org/ojavomorer
[18:42:58] <ynhuser> Hello everyone
[18:44:50] <ynhuser> i am trying to get my new yunohost raspberry pi up at home and running so I can access it from the public internet. I did the diagnostics and I am trying to go through all of the items on the list to correct. However I am trying to ssh into the raspberry pi after I changed the user permissions. However no matter how many times I try to enter in the
[18:44:50] <ynhuser> password for the user it is not being recognized.
[18:45:00] <ynhuser> Am I doing something wrong?
[18:45:57] <mecallie[m]> I just started the install for pixelfed and noticed this error: "fatal: not a git repository (or any of the parent directories): .git". Is this a known issue or is my install going to be corrupt?
[18:51:38] <mecallie[m]> After trying to edit some values in the control panel I get an error for Pixelfed. Any ideas? https://paste.yunohost.org/raw/ozahoqojox
[18:51:42] <ynhuser> anyone around?
[18:53:13] <Alekswag[m]> ynhuser: can you confirm that you're trying to ssh with the `admin` user ?
[18:54:25] <Alekswag[m]> mecallie: sounds like a bug in the app package
[18:54:28] <scjensen> so! I am proceeding with the install. I need to install the GRUB boot loader... I have 3 options, plus "Enter device manually". There's /dev/sda and /sdb and /sdc
[18:54:39] <scjensen> sdc is the USB key. I think I am installing on sda, so... sdb?
[18:55:00] <scjensen> it also advises that maybe I should put it onto removable media
[18:58:01] <Alekswag[m]> If you're installing on sda, then you probably want to install grub on sda
[18:58:17] <scjensen> thx!
[19:02:43] <ynhuser> It was not the admin account, but a new user I created and granted ssh permissions
[19:03:23] <ynhuser> Also I made another update to a user and now my yunohost raspberry pi is no longer allowing me to access the web ui at https://yunohost
[19:04:01] <ynhuser> I rebooted it and it is still not working.
[19:04:04] <scjensen> alright, that was the last step of the process. the system rebooted. I got a screen that asked if I wanted to boot into Debian (which I assumed is actually Yunohost?)
[19:04:07] <scjensen> https://paste.yunohost.org/poyugoluho.cs
[19:04:39] <scjensen> this is what it resolved to
[19:05:10] <scjensen> after several repeats of not finding "system" and "cannot process volume group system"
[19:14:25] <ynhuser> I am going to reinstall and try again
[19:14:30] <ynhuser> somethings not right.
[19:14:45] <ynhuser> I can't access the server anymore
[19:20:15] <loopion> https://aria.im/_matrix/media/v1/download/matrix.org/XNrPkYZfspHHSItKbqywDUmm
[19:27:17] <mecallie[m]> Are there any plans for making a BitTube package?
[19:31:35] <tituspijean> You can check the wishlist
[19:32:47] <eric_G> no BitTube on the wishlist...
[19:33:01] <mecallie[m]> Yeah, never mind. Just checked the project itself: looks a bit dead. The idea appeals to me though: users make money, not the corporations. But I'll stick with peertube :)
[19:34:22] <eric_G> ah, is that Bit as bitcoin?
[19:35:09] <mecallie[m]> No, tube or something is the actual currency you can earn. But it is blockchain based.
[19:36:06] <eric_G> tubecoin 😅
[19:37:05] <eric_G> je n'ai pas osé entubecoin 😬
[19:44:31] <ynhuser> hello. I have an installation of Yunohost on a Freebox Delta through a Debian 'Bulleyes' VM. Most look good but my installed application don't have write permissions on my /mnt/Freebox/ folder. Does anyone has idea how to fix it please? Thank you for your help.
[19:49:51] <scjensen> executing grub-install failed again :(
[20:02:42] <scjensen> should I perhaps install the GRUB boot loader on removable media?
[20:17:04] <scjensen> this is the spot where I grub-install doesn't work, I'm pretty sure: https://paste.yunohost.org/dozuluhadu.sql
[20:22:23] <scjensen> is there any way to fix this from within the installer?
[21:27:55] <SuShY> tituspijean pour info en lien avec notre échange sur Gitea : https://forum.yunohost.org/t/probleme-dacces-ssh-gitea/21068/5