[00:51:05]
<loose_pajamas[m]> Hello everyone, I've recently discovered yunohost and I think it's fantastic! Thank you everyone that has put work into this project.
[00:56:01]
<loose_pajamas[m]> I've run into a minor problem, I have set up a pixelfed and mastodon instance both running on a subdomain. when I try to search a pixelfed user FROM mastodon I get 422Mastodon::HostValidationError on https://MySubdomain.domain.com/.well-known/webfinger?resource=acct:someUser@MySubdomain.domain.com
[05:24:37]
<fritjof[m]> > <@folaht[m]:libera.chat> Yeah, I'm busy with Hans' problem which is now my own really. I don't have much to do tomorrow, so I could try and help.
Much appreciated!!
as far as I can see for now, the problem persists
[05:25:02]
<Folât> What was the problem again?
[05:25:25]
<Folât> oh right, the dependency issues
[05:25:33]
<fritjof[m]> That mastodon stopped working - In my services it looks like this:
[05:28:17]
<Folât> Okay, I'm going to install mastadon on my own computer and see what happens
[05:28:20]
<Folât> Okay, I'm going to install mastadon on my own computer and see what happens.
[05:28:37]
<fritjof[m]> Many thanks!
My friend, who's also running a mastodon instance, has no problems, so I find it weird.
I did some changes to my PHP 8 in an ultimately failed attempt at increasing the permitted upload to Castopod (podcast hosting app in YNH), but other than that, everything has been the usual. except for an update I ran yesterday also.
[05:44:42]
<fritjof[m]> My nextcloud upgrade also keeps failing. Could it be a related issue, or is there a simple fix for that one? here's the log https://paste.yunohost.org/raw/luloxigeci
[05:46:58]
<Folât> I'm installing mastodon now and there are things I notice already.
[05:47:37]
<fritjof[m]> that's..... good news?
At least it makes me feel a little more secure that the issue is not solely because of my inadequacy :)
[05:48:23]
<Folât> Well I'm just as inadequate. 😛
[05:48:53]
<Folât> I had an issue with XMPP, which turned out to be using the client incorrectly.
[05:50:44]
<Folât> The nextcloud update is unrelated, that's for sure.
[05:51:03]
<fritjof[m]> > <@folaht[m]:libera.chat> I had an issue with XMPP, which turned out to be using the client incorrectly.
cool. In that firewall I tried setting up before rushing back when everything broke, I didn't open the XMPP-port, since I thought it didn't do anything outside chat apps. So much for that.
[05:51:23]
<fritjof[m]> > <@folaht[m]:libera.chat> The nextcloud update is unrelated, that's for sure.
Grand. That's a headache for another day then.
[06:09:58]
<Folât> fritjof[m]: I'm beginning think you are not supposed to download the packages the way we've tried yesterday.
[06:16:43]
<Folât> The installation is failing on my side by the way
[06:19:49]
<fritjof[m]> Interesting.
I guess I'd loose everything by reinstall, if I where to try that?
[06:20:49]
<fritjof[m]> Maybe there's a build-essential or something I could install?
[06:27:37]
<Folât> Well if it doesn't even install for me and I'm doing a fresh install, I'm not sure how well yours could ever go.
[06:31:29]
<Folât> fritjof[m]: I would try to backup mastodon as much as you can and do a fresh install.
[06:32:01]
<Folât> But like I said, I'm having trouble doing a fresh install, so I'm going to file an issue on that..
[06:36:55]
<fritjof[m]> > <@folaht[m]:libera.chat> But like I said, I'm having trouble doing a fresh install, so I'm going to file an issue on that..
OK. I'll wait and ser how that issue resolves :)
[06:37:05]
<fritjof[m]> Thanks for the help
[08:29:16]
<fritjof[m]> My mautrix bridge stopped working with telegram after I (by a misspress) initiated encryption in a chat. In an attempt to fix it, I then installed e2be (+ dependecies) - but then the whole bridge broke. How should I configure olm ? - Any pointers on where to find the information I need to fill in are much appreciated :)
https://paste.yunohost.org/evigimimib
[09:24:17]
<hercut[m]> Bonjour, j'ai un souci, j'ai l'impression que la maj majeur ne s'est pas faite correctement : https://paste.yunohost.org/raw/oritaroxol
[09:26:44]
<Folât> Oui, ça y ressemble.
[09:28:56]
<hercut[m]> je ne sais pas quoi faire car ca me demande de finir la migration
[09:30:33]
<Folât> Pourquoi ne peux-tu pas finir la migration ?
[09:37:04]
<hercut[m]> car ca me donne l'erreur que je vous partage
[09:39:29]
<Folât> Que dit « Outils > Journaux dans la webadmin » ?
[09:47:30]
<hercut[m]> bha justement que ca
[09:56:34]
<Folât> Quel est ton appareil et as-tu tout mis à jour ?
[09:57:07]
<hercut[m]> c'est un kimsufi, j'ai mis à jour avant de faire la migration
[09:58:13]
<Folât> Que disent les services ?
[09:59:02]
<hercut[m]> tout est en cours d'excution
[09:59:16]
<Folât> Attendez !
[09:59:44]
<Sidney> > Hm... ça dois jouer que tu soit encore sur l'ancienne version, non ?
> Synapse est un peu capricieux sinon en règle général
tripot: Folât: Bon, j'ai réussi après trois désinstallations/upgrade/échec, à remettre mon Synapse en place.
J'ai du :
1 - mettre YNH en version 11 (toutes les migrations effectuées) -> au passage , migration de 4.4.2.14 en 11.0.9.14 sur VPS OVH, nickel,
2 - désinstaller synapse,
3 - désinstaller l'application Cachet présente sur mon domaine racine (qui est également l'adresse raccourcie de mes adresses Matrix),
4 - remettre la dernière backup de Synapse.
Petite précision, au bout du 3ème échec je suis passé en ligne de commande, et bizarrement ça a fonctionné... 🤔
Encore merci à vous (et merci aussi au post de Jorge sur le forum).
[10:00:09]
<Folât> Que dit `lsb_release -a` ?
[10:01:07]
<hercut[m]> No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
[10:03:48]
<Folât> Tu es déjà sur la version moderne de Debian.
[10:03:48]
<hercut[m]> alors pq je dois encore faire de la migration
[10:04:38]
<Folât> hercut[m]: Que dit `sudo yunohost -v` ?
[10:05:26]
<hercut[m]> yunohost:
repo: stable
version: 11.0.9.14
yunohost-admin:
repo: stable
version: 11.0.10
moulinette:
repo: stable
version: 11.0.9
ssowat:
repo: stable
version: 11.0.9
[10:06:35]
<Folât> Toutes sont la dernière version. Qu'est-ce qui dit encore que tu dois migrer ?
[10:12:23]
<hercut[m]> folaht[m]: l'image est passé ?
[10:13:21]
<Folât> Migration réussie, je dirais.
[10:13:49]
<hercut[m]> pourtant il y a bien ecrit migration en attente
[10:14:45]
<Folât> Où ?
[10:14:59]
<hercut[m]> sur l'image que j'ai envoyé
[10:15:58]
<Folât> Quelle image ?
[10:16:24]
<Folât> https://paste.yunohost.org/raw/oritaroxol ?
[10:17:13]
<Folât> Elle dit seulement que la migration ne peut pas être effectuée.
Raison pour laquelle : Cela a déjà été fait.
[10:17:40]
<hercut[m]> mmm ok c'est que tu n'a pas recu l'image envoyé sur le client
[10:20:07]
<tituspijean> @hercut:matrix.org Utilise le côté Matrix du salon pour éviter le soucis avec les pièces-jointes
[10:20:35]
<hercut[m]> > <@titus[m]:libera.chat> @hercut:matrix.org Utilise le côté Matrix du salon pour éviter le soucis avec les pièces-jointes
ah oui bien vu, je suis sur les deux ...
[10:20:37]
<tituspijean> Là tu causes sur #yunohost:libera.chat
[10:20:45]
<hercut> eheh oui
[10:21:07]
<hercut> > <@folaht:matrix.org> Quelle image ?
https://imgur.com/MRzua7X
[10:22:01]
<hercut> https://aria.im/_matrix/media/v1/download/matrix.org/qdCmNPTvpCQRSgKnkdYQZKtC
[10:22:31]
<hercut> > <@titus:pijean.ovh> @hercut:matrix.org Utilise le côté Matrix du salon pour éviter le soucis avec les pièces-jointes
Je peux partir du salon irc alors ?
[10:23:54]
<Folât>
C'est étrange. Vérifie si tu utilises déjà php7.4 et PostgreSQL 13.
[10:27:02]
<hercut> > <@folaht:matrix.org> C'est étrange. Vérifie si tu utilises déjà php7.4 et PostgreSQL 13.
dans service ?
[10:27:08]
<Folât> Oui
[10:32:16]
<hercut> je suis en php8,0 et postgre je n'arrive pas a savoir
[10:33:12]
<Folât> Redémarre l'ordinateur et regarde si les messages de migration sont toujours là.
[10:40:41]
<hercut> > <@folaht:matrix.org> Redémarre l'ordinateur et regarde si les messages de migration sont toujours là.
rien
[10:40:46]
<hercut> toujours pareille
[10:49:05]
<hercut> yunohosttools: command not found
[10:49:22]
<Folât> Que dit `sudo yunohost tools migrations state` ?
[10:50:01]
<Folât> Désolé, il devrait y avoir un espace entre les deux.
[10:52:04]
<hercut> > <@folaht:matrix.org> Désolé, il devrait y avoir un espace entre les deux.
ne le soit pas c'est gentil de m'aider :)
[10:53:41]
<hercut> tout est sur "Done"
[10:55:33]
<Folât> Rafraîchis la page de site ?
[10:56:22]
<hercut> change rien
[10:59:53]
<Folât> Que dit Migration prédédentes?
[11:00:16]
<hercut> il n'y a rien
[11:00:45]
<hercut> Aucune migration précédente
[11:01:22]
<hercut> c'est ca qui m'etonne, c'est comme si il avait fait la migration virtuellement mais pas physiquement
[11:01:59]
<hercut> je reviens je dois allé dej :/
[11:03:29]
<Folât> Tu veux dire qu'il rend la migration physique, mais pas virtuelle ?
[11:04:11]
<Folât> Car la migration a réussi. C'est juste que les messages sont faux.
[11:13:48]
<Folât> hercut: Je soupçonne qu'il y a une base de données quelque part où c'est faux.....
[11:32:57]
<Folât> hercut: Tu dois supprimer les données qui se trouvent dans la base de données.
[11:33:27]
<Folât> hercut: Tu dois supprimer les messages migration données qui se trouvent dans la base de données.
[11:33:48]
<Folât> Je demanderais sur le forum.
[11:38:08]
<Alekswag[m]> cf https://paste.yunohost.org/raw/oritaroxol , let's check the log of the actual previous migration :
« NB: the previous migration log id seems to be 20220906-075848-tools_migrations_migrate_forward. You can share it with the support team with : sudo yunohost log share 20220906-075848-tools_migrations_migrate_forward »
[12:31:13]
<hercut> > <@Alekswag[m]:libera.chat> cf https://paste.yunohost.org/raw/oritaroxol , let's check the log of the actual previous migration :
> « NB: the previous migration log id seems to be 20220906-075848-tools_migrations_migrate_forward. You can share it with the support team with : sudo yunohost log share 20220906-075848-tools_migrations_migrate_forward »
Folât: https://paste.yunohost.org/raw/pakaqapoja
[13:03:41]
<Folât> hercut: Je pense qu'il serait préférable de soumettre cette question à Alekswag[m]. Il est le programmeur principal de yunohost, n'est-ce pas Aleks ?
[13:04:58]
<Folât> Je ne suis qu'un utilisateur.
[13:08:18]
<Alekswag[m]> hercut[m]: bn du coup ça aiderait si tu peux raconter ce que tu as fait exactement ... genre là la migration était bloqué sur `ffsync` ... est-ce que tu aurais déinstallé ffsync-ynh-deps puis lancé une mise à jour "classique" plutôt que de relancer la migration ...?
[13:13:09]
<hercut> Je n'ai rien fait de particulier, j'utilise uniquement le webadmin. Donc mis à part cliquer sur les bouton que l'on me propose :/
Donc maj des applications et du serveur et puis me voila bloqué.
Dans les log j'ia un truc qui se nomme regen conf : https://paste.yunohost.org/raw/cejimawuse
[13:13:59]
<hercut> https://aria.im/_matrix/media/v1/download/matrix.org/OgFzgyoClMwLODoLLUWowUFF
[13:14:12]
<hercut> > <@folaht:matrix.org> hercut: Je pense qu'il serait préférable de soumettre cette question à Alekswag[m]. Il est le programmeur principal de yunohost, n'est-ce pas Aleks ?
Merci c'est gentil d'avoir regardé :)
[13:32:29]
<hercut> je dois partir mais j'espere qu'on arrivera a trouver, merci de votre aide
[14:14:33]
<fritjof[m]> How do I make the Castopod upload limit bigger?
Currently 2MB which is like 2 mins of Mp3
[14:14:59]
<fritjof[m]> vanilla castopod install on YNH
[14:16:21]
<Alekswag[m]> Fritjof: sounds like there's already `client_max_body_size 512M;` in the nginx conf, so I'm thinking the issue lies in the php conf
[14:16:58]
<Alekswag[m]> hm there's also a 512MB limit here : https://github.com/YunoHost-Apps/castopod_ynh/blob/master/conf/php-fpm.conf#L404
[14:17:06]
<Alekswag[m]> (could you be that you're behind a reverse proxy maybe ?)
[14:19:06]
<fritjof[m]> Maybe - what is that and how do I fix it?
[14:19:54]
<fritjof[m]> reverse proxy, I mean. Can I make that not be?
[14:39:53]
<Alekswag[m]> if you were behind a reverse proxy you would probably be aware of it, so probably not that :P
[14:40:00]
<Alekswag[m]> (I'm just paranoid about reverse proxies)
[14:53:19]
<মুস্তাগফির> এক্সক্স
[14:54:09]
<Folât> Bonjour à toi aussi
[14:56:39]
<Folât> Bonjour à toi aussi / দিনটিও শুভ।
[15:00:31]
<মুস্তাগফির> ব্ব
[15:02:04]
<Folât> তুমি কি বলতে চাচ্ছ?
[15:02:56]
<Folât> Que veux-tu dire ? / তুমি কি বলতে চাচ্ছ?
[15:10:58]
<baslow> Just tried to install Funkwhale (on a Linode server that already has WriteFreely, Pixelfed and Nitter installed, in case that makes a difference) but installation failed. Log is here: https://paste.yunohost.org/raw/ejaqavobey
[15:16:35]
<baslow> The first sign I've found (so far) of a problem is on this line in the log, near the end: "2022-09-12 15:06:38,917: DEBUG - AttributeError: module 'lib' has no attribute 'SSL_CTX_set_ecdh_auto'"
[15:16:50]
<interlaced> hi all - which office do you install with nextcloud?
[15:22:28]
<Folât> Office?
[15:22:49]
<Folât> Oh, you mean e-mail client?
[15:24:01]
<baslow> I think they mean office suite, like onlyoffice or collabora - word processing, spreadsheets, presentation...
[15:25:05]
<Folât> baslow: Does nextcloud support that these days?
[15:26:12]
<interlaced> yup, I mean office suite. i.e. either collabora or onlyoffice?
[15:26:33]
<baslow> https://apps.nextcloud.com/apps/onlyoffice https://apps.nextcloud.com/apps/richdocuments
[15:27:14]
<Folât> Try either of them.
[15:27:43]
<interlaced> Thanks. I'm aware they both exist. Curious about which you use tho?
[15:28:02]
<Folât> I don't. Never needed them before.
[15:28:12]
<Folât> I just use it for my cloud.
[15:28:33]
<interlaced> I see. Thanks anyway - baslow?
[15:29:31]
<Folât> You could ask on the forum.
[15:29:57]
<baslow> I installed Collabora -- because I have LibreOffice installed on my laptop -- but I can't say I've used it much, so not much up-to-date experience...
[15:30:28]
<interlaced> baslow: ah ok. Thanks for the insight
[15:30:48]
<interlaced> I just tried to install onlyoffice. While it worked when testing bullseye it now fails with the stable version :X
[15:32:24]
<baslow> Sorry, I'm afraid I can't be of much help...
[15:33:29]
<interlaced> Ok. Curious if anyone in here has onlyoffice running?
[15:35:59]
<মুস্তাগফির> ভাল আছেন?
[15:37:04]
<Folât> হ্যাঁ এবং আপনার সাথে?
[15:38:13]
<মুস্তাগফির> কে আপনি?
[15:40:04]
<Folât> আমি ডাচ। আপনি একটি সমর্থন চ্যানেলে আছেন। এখানে লোকেরা একটি নির্দিষ্ট অ্যাপ্লিকেশনের জন্য প্রশ্ন জিজ্ঞাসা করে।
[15:41:08]
<Folât> আপনি যে জন্য এখানে এসেছেন তা না হলে, আপনি কি অন্য কোথাও চ্যাট করবেন? লোকেরা এখানে সাহায্যের জন্য বা সাহায্য করতে আসে।
[15:43:03]
<মুস্তাগফির> আমি কি সাহায্য করতে পারি?
[15:48:40]
<মুস্তাগফির> আমাকে টাকা ইনকাম করতে সাহায্য করতে পারবেন আমি কোন কাজ করে দলাম আপনার এর বিনিময়ে??
[15:53:33]
<Folât> মুস্তাগফির: Dis-nous simplement « au revoir» et quitte ce salon. / শুধু আমাদেরকে "বিদায়" বলুন এবং এই চ্যানেলটি ছেড়ে দিন।
[15:54:09]
<Folât> Ce n'est pas le but de ce salon. Peux-tu changer de salon SVP ? / এই চ্যানেলটি এর জন্য নয়। আপনি কি অন্য চ্যানেলে স্যুইচ করবেন?
[15:58:25]
<মুস্তাগফির> ওকে
[16:00:11]
<মুস্তাগফির> দয়া করে চাকরি করতে পারবো এমন চেনেল দিবেন??
[16:01:09]
<Folât> আমি ইতিমধ্যে এটা করেছি.
[16:02:35]
<parleur> Hum, looks like I have the same kind of problem with Mastodon than the one I have with Peertube.
https://paste.yunohost.org/raw/badisazafu
[16:05:08]
<Folât> parleur: Looks like it.
[16:05:27]
<parleur> Fediverse is cursed. :)
[16:06:12]
<মুস্তাগফির> দেখতেছি
[16:44:55]
<Folât> La France est maudite.
[16:56:31]
<Folât> > <parleur> Hum, looks like I have the same kind of problem with Mastodon than the one I have with Peertube.
> https://paste.yunohost.org/raw/badisazafu
How similar?
[17:26:30]
<evon> Chrome is giving me the error "site can't be reached" when I try to navigate to the ip of yunohost. Yunohost is running on KVM. I can ping the ip perfectly. the VM is connected to the net via network bridge.
[17:26:48]
<evon> I have yunohost in a vm. I'm using KVM. I can ping it fine but I keep getting a bad gateway error whenever I try to navigate to yunohost using the ip address from the host. Any idea how to troubleshoot this?
[17:27:18]
<Folât> Can you ssh into it?
[17:27:45]
<Folât> And do a diagnose on it? Check services?
[17:27:50]
<evon> Folât: no
[17:27:52]
<evon> So my VM has nginx running on port 80. I am using KVM. I can navigate to the guest site when I use NAT networking but I get an "unable to reach site" error when I try to navigate to the site from the host when I use bridge device. Anyone know why I would get this error? I'd rather use the bridge to provide internet to my VMs
[17:28:04]
<evon> Folât: Nginx is running
[17:28:41]
<Folât> You can reach the KVM termninal without ssh correct?
[17:28:44]
<evon> When I change it to NAT networking, yunohost works fine whithout making any changes to yunohost at all
[17:29:09]
<evon> Folât: Correct. I can ping the yunohost ip but that's it
[17:29:58]
<Folât> You're using a virtual machine. Shouldn't you be able to log into it?
[17:30:54]
<evon> Folât: I can login to it the terminal and run commands but I can't access yunohost from a web browser
[17:31:11]
<evon> Works with NAT but not with a Bridge
[17:31:46]
<Folât> If you can log into the terminal, then you can run yunohost commands.
[17:32:15]
<evon> Folât: But I can't access the web interface.
[17:32:15]
<Folât> `sudo yunohost diagnosis`
[17:33:22]
<Folât> `sudo yunohost service status`
[17:33:29]
<evon> running now
[17:34:07]
<Folât> And check if there are any errors in the diagnosis and what services are running or not.
[17:40:12]
<evon> Folât: How do i turn on ssh? I can't pastebin the output from my vm unfortunately.
[17:40:56]
<Folât> Can you cut and paste the text anywhere outside the vm?
[17:41:02]
<evon> Folât: no
[17:41:29]
<evon> is says sshd is running so I don't know what I can't ssh into it
[17:41:32]
<Folât> Do a screen capture of what you think is relevant then.
[17:41:34]
<evon> keeps saying no route to host
[17:45:42]
<evon> https://www.imgpaste.net/image/K2qLo8
[17:45:49]
<evon> Folât: https://www.imgpaste.net/image/K2qLo8
[17:47:41]
<Folât> `sudo yunohost tools regen-conf nginx --dry-run --with-diff`
[17:49:47]
<Folât> What's kodi?
[17:51:54]
<evon> Kodi is a media server. not important.
[17:51:58]
<evon> I ran the command now what?
[17:52:16]
<Folât> Screenshot the result.
[17:52:27]
<Folât> Did you change anything to nginx manually?
[17:54:40]
<Folât> If you haven't conscriously, then just run `sudo yunohost tools regen-conf nginx --force`
[17:55:31]
<Folât> and then either refresh the page, restart nginx or reboot the machine.
[17:55:58]
<evon> Folât: No I have not changed anything in nginx at all. It just starts working when I change the networking to NAT
[17:56:06]
<Folât> and then either refresh the page, or restart nginx/reboot the machine if it's not running.
[17:56:21]
<Folât> Okay, then run that command.
[17:58:10]
<evon> Same result :-(
[17:58:31]
<Folât> I need to go, I'll be back in 30 minutes.
[17:59:32]
<Folât> Is the configuration file still manually modified?
[18:00:32]
<Folât> What about `sudo yunohost diagnosis` ?
[18:00:52]
<Folât> And what does `sudo yunohost service status` yield for nginx?
[18:03:10]
<evon> Folât: Here's a more detailed screenshot from the first command you told me to run https://www.imgpaste.net/image/K2qaCs
[18:09:07]
<parleur> > > <parleur> Hum, looks like I have the same kind of problem with Mastodon than the one I have with Peertube.
> > https://paste.yunohost.org/raw/badisazafu
>
> How similar?
« Permission denied @ rb_check_realpath_internal - bin/bundle (Errno::EACCES) »
[18:25:47]
<Folât> evon: Scroll more to the right and take a screenshot again.
[18:38:48]
<Folât> "If that's not the case, you try to..." \<- what's beyond this line?
[18:42:07]
<Folât> evon: `sudo yunohost domain list` \<- check if your main domain is the correct one
[18:43:21]
<Folât> and try `sudo yunohost dyndns update` if it is
[18:54:19]
<fritjof[m]> > <@Alekswag:matrix.org> if you were behind a reverse proxy you would probably be aware of it, so probably not that :P
Actually I might be and not be aware. (Sorry to admit) How do I check for it?
[18:55:54]
<ynhuser> Bonjour, depuis la dernière mise à jour de Yunohost, la mise à jour de Nextcloud renvoie un message d'erreur. Comment réparer ce problème ?
[18:55:56]
<ynhuser> Erreur: "400" Bad Request Action: "PUT" /yunohost/api/apps/nextcloud/upgrade
[18:56:15]
<ynhuser> Les pré-requis de nextcloud ne sont pas satisfaits, le paquet yunohost (4.4.2.14) doit être >= 11.0.9
[19:07:25]
<Folât> ynhuser: Migre ta version de yunohost.
[19:08:18]
<dhusch> Hey, I wanted to use a Docker App. To use it, I have to expose the Port 1935 (RTMP) to the Public. How do I do that? (more Info at: https://forum.yunohost.org/t/open-port-for-docker-app/21207)
[19:08:51]
<dhusch> Only doing that in the Firewall doesn't seem to work
[19:09:40]
<Folât> ynhuser: `sudo yunohost tools migrations run`
[19:10:22]
<Folât> dhusch: What does diagnosis say?
[19:10:49]
<dhusch> Folât: It doesn't show that port at all...
[19:11:08]
<Folât> Ah, what type of domain do you have?
[19:12:02]
<Folât> A yunohost one or a custom one?
[19:12:12]
<dhusch> I'm using a normal Domain (restreamer.dhusch.de) for that. The WebApp is useable using redirecter. But I have to expose the RTMP Port
[19:13:35]
<Folât> Okay, who is the registrar of restreamer.dhusch.de?
[19:13:42]
<Folât> Okay, who is the registrar of `restreamer.dhusch.de`?
[19:14:08]
<dhusch> Im at one.com for the Domain. But that already worked using PeerTube in the past.So it seems like I just didn't open the port correctly in Yuno
[19:15:02]
<Folât> dhusch: What does the DNS configuration of dhusch.de say at one.com?
[19:15:22]
<dhusch> it's a cname to a YunoHost Domain
[19:18:54]
<Folât> How long ago did you add that?
[19:19:29]
<dhusch> Maybe like a year ago... Both the Server and Domain are very old
[19:21:00]
<Folât> Oh wait..I'm being a bit silly..ermm...
[19:21:10]
<Folât> Can I see the port forwardings?
[19:21:18]
<dhusch> Of Yuno?
[19:21:52]
<dhusch> It's a VPS where all Ports are open all the time …
[19:22:13]
<Folât> In your router of your yuno.
[19:23:01]
<dhusch> Yuno runs on a VPS, I can't close any Ports, they are always forwarded to my server
[19:23:27]
<dhusch> Or did you mean the Firewall of YunoHost?
[19:23:36]
<Folât> I'm not familiar with VPS :/, so I guess I'll have to give up. You'll just have to wait for someone with more experience than a random user.
[19:24:06]
<Folât> Anything that closes and opens ports.
[19:24:16]
<dhusch> VPS is basically a Server brought online. You just rent it...
[19:24:55]
<fritjof[m]> I run in a VPS also - I tried configuring a firewall on the VPS the other day and a lot of stuff broke. I think it might be enough with the YNH firewall - maybe some discrepancies between the ports on the two?
[19:25:33]
<Folât> Your port is closed, which can mean only three things, a firewall blocks it, the port is not forwarded, the application using that port is not running.
[19:25:54]
<dhusch> The App is running and the only firewall is yuno...
[19:27:04]
<dhusch> There is an Image of my Firewall inside YunoHost: https://paste.dhusch.de/?0da15127cd057d82#5PSBxKwH5vW8wpkj26jQNQq9onZrLB1QxmqjiU9LA5p2
[19:28:58]
<dhusch> fritjof[m]: I only have the one from Yuno, that doesn't seem to open the port correctly
[19:29:46]
<fritjof[m]> > <@_bifrost_dhusch2fsupport40conferenceyunohostorg[m]:libera.chat> fritjof[m]: I only have the one from Yuno, that doesn't seem to open the port correctly
ah - for a second there I thought I had found somebody suffering from the same heap of troubles. Alas, yours is a different heap.
[19:31:21]
<Folât> Is restreamer running?
[19:31:30]
<dhusch> Folât: yes
[19:32:19]
<Folât> What do the logs of the restreamer service say?
[19:33:47]
<dhusch> I don't know how to get them, but it is working without a Problem and the server itself can communicate with it on that Port, but seems to block people from the outside
[20:11:59]
<ynhuser> hello anyone can tell me what is the xmpp conection URL to enter in converse.js client
[20:12:36]
<tituspijean> dhusch: I don't want to be an ass, but have you tried exploring the command line? `yunohost firewall --help`
[20:12:49]
<dhusch> yes
[20:13:49]
<dhusch> I currently stopped the firewall and fail2ban and it still doesn't work...
[20:14:24]
<tituspijean> (my bad, I misread the port number)
Are you sure that it's running correctly within the container?
[20:15:07]
<tituspijean> ynhuser hi, I don't remember needing to setup a URL :/
[20:15:07]
<dhusch> It is, i can open the WebApp using redirect_ynh (restreamer.dhusch.de)
[20:17:52]
<ynhuser> tituspijean converse.js ask for a websocket connection URL
[20:18:14]
<ynhuser> tituspijean converse.js ask for a websocket connection URL, and I don't know where to find it
[20:19:59]
<tituspijean> ynhuser: Can you show a screenshot?
[20:23:22]
<tituspijean> dhusch: Silly question again, have you used the `-p 1935:1935` option when deploying the container? (the documentation on the website does not mention it, but the github repo does)
[20:24:25]
<dhusch> No, but another Port for the WebApp, which is only working internally... trying it now …
[20:25:07]
<tituspijean> cf. https://github.com/datarhei/restreamer#quick-setup
[20:26:54]
<ynhuser> sorry I can't upload a screenshot
[20:27:01]
<ynhuser> sorry I can't upload a screenshot on this chat
[20:29:10]
<ynhuser> tituspijean Go to Converse.js home page as it's a xmpp client in the yunohost doc list, download the desktop version and open it, you will 3 fields to fill : login, password, connection URL (wss://)
[20:29:42]
<tituspijean> oh... I only use the webapp
[20:30:07]
<dhusch> tituspijean: Now its working, thank you very much!
[20:30:35]
<tituspijean> 👍️
[20:30:50]
<ynhuser> the webapp do not ask for a URL but can't reach the yunohost server of my company, so I trized the desktop version (that is an electron veversion of the webapp)
[20:31:11]
<ynhuser> tried*
[20:32:03]
<tituspijean> is the webapp installed on the same server as the XMPP of the company?
[20:32:23]
<centralscrutinizer[m]> hello had some issues during the migration to bullseye on another machine
[20:33:25]
<centralscrutinizer[m]> ``lsb_release -a`` gives:
No LSB modules are available.
Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye)
Release: 11 Codename: bullseye
[20:33:44]
<centralscrutinizer[m]> * ```lsb_release -a``` gives:
No LSB modules are available.
Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye)
Release: 11 Codename: bullseye
[20:33:48]
<مجد الدعيس> الو
[20:33:51]
<مجد الدعيس> الو
[20:34:11]
<مجد الدعيس> Hi
[20:34:18]
<ali alshthly> Hi
[20:34:30]
<مجد الدعيس> > Hi
U welcome
[20:34:49]
<ali alshthly> > U welcome
🖐️
[20:35:05]
<centralscrutinizer[m]> but ``yunohost --version`` gives
yunohost:
repo: stable version: 4.4.2.14
yunohost-admin: repo: stable
version: 4.4.1 moulinette:
repo: stable version: 4.4.1
ssowat: repo: stable
version: 4.4.1
[20:37:26]
<dhusch> tituspijean: ok, after enabling the Firewall again, it stopped working …
Im leaving it off for now, maybe trying to open the port using a "Custom App" later on
[20:38:11]
<tituspijean> ynhuser: sorry but the Converse app for YunoHost does not use wss:// for its config.
[20:38:20]
<tituspijean> dhusch: you really should not do that :/
[20:38:23]
<Folât> centralscrutinizer[m]: `sudo yunohost tools update && sudo yunohost tools upgrade system` ?
[20:39:14]
<centralscrutinizer[m]> You can't run this now because dpkg/APT (the system's package managers) seem to be in a corrupted state... You can try to fix this by connecting via SSH and running `sudo apt install --fix-broken` and/or `sudo dpkg --configure -a`
[20:39:38]
<centralscrutinizer[m]> tried them both
[20:39:44]
<Folât> and?
[20:39:53]
<dhusch> tituspijean: yea but i don't know how to tell the firewall not to block the port … 'yunohost firewall allow Both 1935' doesn't seem to work …
[20:40:29]
<tituspijean> dhusch: what does `sudo lsof -i :1935` tell you?
[20:40:35]
<ynhuser> tituspijean Not on the same server, the webapp is the one at https://conversejs.org/fullscreen.html
[20:40:39]
<ynhuser> ok no wss, it says that a http URL can go there too
[20:41:03]
<centralscrutinizer[m]> and getting error:
gzip: stdout: No space left on device E: mkinitramfs failure gzip 1
update-initramfs: failed for /boot/initrd.img-5.10.0-18-amd64 with 1
[20:41:18]
<tituspijean> ynhuser: YunoHost offers a ConverseJS app. Try it?
[20:41:36]
<dhusch> tituspijean: root@main:~/dockers# lsof -i :1935
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
docker-pr 154745 root 4u IPv4 31454241 0t0 TCP *:1935 (LISTEN)
docker-pr 154754 root 4u IPv6 31452961 0t0 TCP *:1935 (LISTEN)
[20:41:47]
<Folât> centralscrutinizer[m]: What does `df -h` say?
[20:41:57]
<ynhuser> tituspijean I seeking in the git, I could find jabber.domain.tld or xmpp-upload.domain.tld can I use that?
[20:42:56]
<tituspijean> ynhuser: Can you confirm you do NOT want to install https://install-app.yunohost.org/?app=converse ?
[20:43:21]
<centralscrutinizer[m]> > <@folaht[m]:libera.chat> centralscrutinizer[m]: What does `df -h` say?
udev 7,5G 0 7,5G 0% /dev
tmpfs 1,6G 1,5M 1,6G 1% /run /dev/mapper/system-root 233G 82G 139G 38% /
tmpfs 7,6G 32K 7,6G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
/dev/nvme0n1p1 230M 212M 1,7M 100% /boot /dev/sdc1 1,9T 87G 1,8T 5% /media/bckp /dev/sda1 932G 3,2G 928G 1% /media/disk1 /dev/sdb1 932G 61G 870G 7% /media/disk2 tmpfs 1,6G 60K 1,6G 1% /run/user/125 tmpfs 1,6G 56K 1,6G 1% /run/user/1007
[20:45:04]
<tituspijean> dhusch: try restarting the container after enabling the firewall?
[20:45:25]
<dhusch> tituspijean: Ok, I'm trying that
[20:45:39]
<Folât> centralscrutinizer[m]: That's a bit garbled. What's that one thing that's 100% filled?
[20:46:57]
<Folât> Wait, I see, it's /boot
[20:47:13]
<centralscrutinizer[m]> yup 😅
[20:47:30]
<Folât> Looks like you have a full partition there.
[20:47:33]
<centralscrutinizer[m]> ok i removed one of the many kernel I had theee
[20:47:42]
<centralscrutinizer[m]> * ok i removed one of the many kernel I had there
[20:47:44]
<Folât> That should do it.
[20:48:09]
<tituspijean> (hopefully that was an old one and not the current one. :p)
[20:49:20]
<dhusch> Ok now it seems to be working with firewall, thank you very much
[20:49:25]
<dhusch> tituspijean:
[20:49:35]
<tituspijean> 👍️
[20:50:12]
<centralscrutinizer[m]> > <@titus[m]:libera.chat> (hopefully that was an old one and not the current one. :p)
yeah did that error back in time...not gonna happen again 🫣
[21:02:18]
<ynhuser> tituspijean Yes I confirm I do not have the hand on yunihost server, I just know the domain and my creds, I'm trying Converse.js as a client...
[21:02:19]
<ynhuser> Note that everything is fine with this infos on Dino client ...
[21:02:20]
<ynhuser> Also, according to https://github.com/YunoHost/yunohost/blob/dev/conf/metronome/metronome.cfg.lua#L69
[21:02:21]
<ynhuser> there should be a websocket config no ?
[21:10:20]
<jeancroix> hello, my migration of yunohost to 11 Bullseye failed with unmet dependencies. Here is the log: https://paste.yunohost.org/raw/emikuxiwel
[21:10:50]
<jeancroix> please help
[22:32:14]
<Maranda> ynhuser: that only loads the related module, but Metronome is behind nginx as reverse proxy
[22:32:30]
<Maranda> so if nginx doesn't forward WS correctly, that won't work
[23:00:43]
<evon__> Folât: I'm back
[23:02:31]
<Folât> evon: What was the issue again?
[23:03:13]
<Folât> Oh right, the KVM and nginx thing, correct?
[23:03:24]
<Folât> nginx wasn't working.
[23:04:00]
<Folât> `sudo yunohost domain main-domain`
[23:04:11]
<Folât> Do you have the correct main domain?
[23:05:05]
<Folât> `sudo yunohost dyndns update`
[23:06:29]
<evon__> Folât: Check this out. https://www.imgpaste.net/image/K2qaCs
[23:07:14]
<Folât> Yes, your dns configuration is incorrect and if I remember correctly, you likely have a yunohost domain.
[23:07:46]
<evon__> Folât: yes I have a yunohost domain but I am behind a reverse proxy so i just want to try to access yunohost from the ip for now from the host machine
[23:08:19]
<Folât> What does `sudo yunohost domain main-domain` result into?
[23:08:30]
<evon__> 3von.nohost.me
[23:08:31]
<Folât> Okay
[23:08:46]
<Folât> What about `sudo yunohost dyndns update` ?
[23:09:56]
<evon__> Folât: no output for that command
[23:13:33]
<evon__> Folât: could it be a router issue. That pic I sent you shows that there is a DNS issue
[23:14:43]
<Folât> Hmmm...
[23:15:50]
<evon__> Folât: My router has a vlan/bridge setting. But when I turne it on I lose internet connectivity
[23:16:07]
<Folât> Yes, I would check your router.
[23:16:41]
<Folât> I'm not familiar with vlan/bridge
[23:17:02]
<evon__> Folât: Me either. I will do some reading up on that setting later
[23:17:32]
<Folât> I tried pinging your domain and while I'm not able to ping it, it goes give me an IP address.
[23:20:35]
<evon__> Folât: Yeah it won't work because I haven't updated the IP address in the reverse proxy. One sec
[23:22:00]
<evon__> Folât: ok try now