[08:31:17]
<webmink> I don't see it on scrollback - I just had an upgrade for RoundCube offered (RPi, v11.2.9.1) but the upgrade failed, log here: https://paste.yunohost.org/raw/zeworomiqu
[08:33:40]
<tituspijean> > <@chatpitaine:cirkau.art> Just to let you know.
> I managed to create a .local subdomain (subdomain.mydomain.local) with the CLI command.
> I don't know yet if there will be bad consequences, but I'm testing, so, no worries.
> If there is no consequence, maybe adapt the GUI to accept . in the names could be ok.
mmmh the mDNS protocol should not be able to broadcast such a subdomain. Can you actually reach it from a client on the same network?
[08:39:11]
<tituspijean> (speaking, not as an expert, but as the dude who wrote most of the code for yunomdns and extensively tried to make it work with subdomains ^^)
[10:38:16]
<Chatpitaine Caverne> > <@titus:pijean.ovh> mmmh the mDNS protocol should not be able to broadcast such a subdomain. Can you actually reach it from a client on the same network?
I had to work around maintaining the `/etc/hosts` file, but for now it work.
And Yunohost is well written cause it tells you that it should not work with mDNS and indeed it doesn't.
[10:40:05]
<nicofrand> Hi! I tried to upgrade the umami app, which failed, and the app is not listed anymore. But I can't restore the backup nor install it again because some parts seem to remain (role and database). https://paste.yunohost.org/raw/ezaganosaz Is there a way to force the removal of an app?
[10:54:33]
<Mateusz Szymański> > Hi! I tried to upgrade the umami app, which failed, and the app is not listed anymore. But I can't restore the backup nor install it again because some parts seem to remain (role and database). https://paste.yunohost.org/raw/ezaganosaz Is there a way to force the removal of an app?
How did this even happen? Do you happen to have the log of the upgrade?
[10:56:15]
<nicofrand> I had a disk space issue
[10:57:59]
<Mateusz Szymański> ah
[10:58:26]
<nicofrand> Thought 2Go would be enough for an upgrade, but "npm"
[10:59:16]
<nicofrand> Would manually deleting the psql DB help?
[11:00:50]
<Mateusz Szymański> perhaps you should just `sudo -u postgres psql -c DROP DATABASE umami`, `rm -rf /var/www/umami` and start over?
[11:01:47]
<Mateusz Szymański> > Would manually deleting the psql DB help?
that's precisely what log you provided said
[11:02:56]
<nicofrand> yeah, just wanted to be sure before doing it
[11:03:43]
<nicofrand> `/var/www/umami` was already removed by some upgrade/removal action
[12:06:09]
<Louis> I there, I’m having an issue when I run the diagnosis I get the error `[ERROR] The server does not have working IPv4.`. I check OVH firewall (my host provider) and IPv4 is authorized, I can connect to the VM with its IPv4 like `ssh username@ipv4`. I don’t really know where to look for to fix this issue…
[12:07:00]
<Mateusz Szymański> > <@louisvgn:matrix.org> I there, I’m having an issue when I run the diagnosis I get the error `[ERROR] The server does not have working IPv4.`. I check OVH firewall (my host provider) and IPv4 is authorized, I can connect to the VM with its IPv4 like `ssh username@ipv4`. I don’t really know where to look for to fix this issue…
what happens when you `curl https://ipv4.yunohost.org/` from that server? Does it display the same IP you use for connecting via SSH?
[12:08:36]
<Louis> It does yes
[12:09:56]
<Mateusz Szymański> ¯\_(ツ)_/¯ then I'm out of ideas
[12:11:20]
<Mateusz Szymański> I must be understanding the code wrong: https://github.com/YunoHost/yunohost/blob/8120ac2b3ff2c32a6a812647712663552cc396a6/src/diagnosers/10-ip.py#L131
[12:11:56]
<ChriChri[m]> Hm, it seems I'm getting notifications for all messages...
[14:10:10]
<peuplier> > Hey there, I have installed yunohost on a raspi4 with an SD card and set up the first connection everything fine. before going any further into configuration I would like to transfer the yunohost install on the nvme sata disk I have connected to the raspI. How would you go around that, is there anyway to have a GUI involved to make it easy? Thanks in advance !
Found my way with RPI-clone.
[20:40:00]
<hook> Em, `pelican` just disappeared from my system.
[20:40:15]
<hook> `which pelican` neither as pelican nor root user finds anything anymore.
[20:40:21]
<hook> It worked a few hours ago.
[20:46:49]
<hook> `/var/log/apt/history.log` does not show anything suspicious
[20:49:41]
<hook> Is there a way I can re-install it without removing the settings and folder with my blog?
[20:52:11]
<hook> Shouldn’t there _be_ a package called `pelican-ynh`?
[20:53:26]
<hook> I only see `pelican-ynh-deps` …odd
[21:25:15]
<hook> Nevermind, my bad. I skipped a step.