[07:00:24]
<·☽•Nameless☆•777 ·> Salut o/
[07:01:41]
<·☽•Nameless☆•777 ·> Je me posais la question ça serait possible d'avoir par exemple un sous-domaine de genre mondomain.ynh.fr avec monsousdomaine.mondomain.ynh.fr qui ne serait gérée par une autre dns que ceux de yunohost ?
[07:02:04]
<·☽•Nameless☆•777 ·> En résumé faire gérer " monsousdomaine " par un serveur dns different .
[07:03:54]
<·☽•Nameless☆•777 ·> ça permettrait de donner un peu plus de contrôle aux utilisateurs et permettrait surement de soulager les serveurs dans des yunohost .
[07:04:31]
<·☽•Nameless☆•777 ·> ( Après je ne sais pas si je suis au bon endroit pour poser ce genre de question )
[07:08:52]
<Chatpitaine Caverne> ·☽•Nameless☆•777 ·: Peut-être un peu à côté ou overkill, mais suis en train d'installer Haproxy en Front "sur" mon routeur et ça permet de faire cela, entre autre.
[HAProxy config tutorials](https://www.haproxy.com/documentation/haproxy-configuration-tutorials/)
[07:10:16]
<Tag> ·☽•Nameless☆•777 ·: Salut o/ Si tu veux utiliser ton propre serveur DNS, il est peut être temps de te séparer du ynh.fr et opter pour un eu.org ;)
[07:10:56]
<Chatpitaine Caverne> En effet, j'avais pas fait gaffe.
[07:16:03]
<·☽•Nameless☆•777 ·> > <@chatpitaine:cirkau.art> ·☽•Nameless☆•777 ·: Peut-être un peu à côté ou overkill, mais suis en train d'installer Haproxy en Front "sur" mon routeur et ça permet de faire cela, entre autre.
> [HAProxy config tutorials](https://www.haproxy.com/documentation/haproxy-configuration-tutorials/)
Je pense qu'on c'est mal compris,
pour faire ce que je veux il faut que l'équipe de yunohost ajoute un enregistrement dns sur leur serveur dns qui dit que voila monsousdomaine.mondomain.ynh.fr .
[07:16:43]
<·☽•Nameless☆•777 ·> En effet je devais passer chez Gandi avant qu'il passe du coté obscur de la force ,
Mais mon but ici est de récupérait le contrôle sur les enregistrements dns que je peux avoir et surtout ne pas avoir à gérer la paperasse lier à l'acquisition d'un nom de domaine sans compter le coup et les finances .
[07:17:18]
<Tag> D'où ma proposition de eu.org et non un autre tld :) C'est gratuit et c'est "des copains"
[07:19:53]
<Tag> Actuellement tu peux déjà enregistrer des sous-domaines de ton domain.ynh.fr et ils pointeront vers la même IP. Ce qui n'est pas possible pour l'instant c'est déléguer cet enregistrement à un autre serveur DNS. Pour le moment, si tu souhaites héberger toi même ton service DNS, la solution gratuite et alternative qui me vient à l'esprit est eu.org :p
[07:21:09]
<·☽•Nameless☆•777 ·> J'avais des domaines privée avec nsd pour me faire la main a un moment .
[07:21:13]
<Tag> Et si vraiment tu n'as pas envie de faire de la paperasse, tu peux envoyer un corbeau à https://dns-witch.net.eu.org/fr/ :p
[07:21:38]
<·☽•Nameless☆•777 ·> Merci ! je regarde ça =)
[07:23:19]
<·☽•Nameless☆•777 ·> Je connais eu.org et je n'ai pas envie des embêté,
avec yunohost je peux simplement créer un domaine depuis un terminal ou le gui web.
[07:23:37]
<·☽•Nameless☆•777 ·> Je connais eu.org et je n'ai pas envie des embêté,
avec yunohost je peux simplement créer un domaine depuis un terminal ou le gui web.
( et le suprimer )
[08:54:24]
<westbam> Slt, des utilisateurs de roundcube par ici ?? des soucis avec la derniere update ? https://paste.yunohost.org/raw/xeguqowoqo
[08:59:46]
<lud0> Salut westbam, sujet ouvert https://github.com/YunoHost-Apps/roundcube_ynh/issues/193
[09:56:26]
<ben> Paperless-ngx is working again! Yay.
[10:25:58]
<isAAAc> westbam: j'ai contourné le pb en désinstallant reinstallant roundcube, pas de perte de messages,
par contre faut reconf les comptes à la nouvelle connexion (passer de localhost au ndd , de mémoire)
[10:36:01]
<westbam> > westbam: j'ai contourné le pb en désinstallant reinstallant roundcube, pas de perte de messages,
> par contre faut reconf les comptes à la nouvelle connexion (passer de localhost au ndd , de mémoire)
Ok merci, je regarderai quand j'aurai un peu plus de temps....
[11:19:04]
<theragehero> Hello, talking about this ticket, would it help if I try to manually update n8n to see if it raise the same error, or would I just waste time? Thank you.
https://github.com/YunoHost-Apps/n8n_ynh/pull/51
[11:22:29]
<theragehero> Oh, I have also a problem in trying to connect from n8n to WordPress. The login works well, but when the WordPress node tries to create a post it says that the user cannot create posts (it's an admin user). It seems related to an authentication issue (I seen that ynh WordPress doesn't allow application password). Do you know any workaround? Thank you😁
[14:18:13]
<Jose Riha> hello, my YNH instance is breaking up. i see a lot of these in the logs:
```
[11435755.565678] traps: php8.2[2020198] general protection fault ip:7f7127c45c60 sp:7ffcff9a76e8 error:0 in libuuid.so.1.3.0[7f7127c42000+4000]
[11435816.347411] traps: php8.2[2020267] general protection fault ip:7f00a5524c60 sp:7fff18d34738 error:0 in libuuid.so.1.3.0[7f00a5521000+4000]
[11435822.423621] traps: yunohost[2020288] general protection fault ip:7f6525367c60 sp:7ffd87f616d8 error:0 in libuuid.so.1.3.0[7f6525364000+4000]
```
[14:19:30]
<Jose Riha> or this..
```
Regenerating configuration, this might take a while...
/var/lib/dpkg/info/yunohost.postinst: line 5: 2103873 Segmentation fault yunohost app ssowatconf
dpkg: error processing package yunohost (--configure):
installed yunohost package post-installation script subprocess returned error exit status 139
Errors were encountered while processing:
yunohost
needrestart is being skipped since dpkg has failed
E: Sub-process /usr/bin/dpkg returned an error code (1)
```
[14:19:37]
<Jose Riha> is this a known problem?
[14:20:33]
<Mateusz Szymański> nope, segfaults should not happen
[14:20:39]
<Jose Riha> hm
[14:21:45]
<Jose Riha> https://aria.im/_matrix/media/v1/download/matrix.org/XkRPhGUzTkMHzTlWOzlwdUaG
[14:22:06]
<Jose Riha> not sure if this `dmesg` is normal either. yunohost running on VPS
[14:22:41]
<Jose Riha> stopping `mopidy` running on TCP/6600 just to see if it fixes anything
[14:29:16]
<Jose Riha> could you please share your `md5sum`:
```
md5sum /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
eabad6e270c83aaebe7e4be87448820a /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
```
[14:37:40]
<Jose Riha> also this returns segfault with ease:
```
$ yunohost app ssowatconf
Segmentation fault
```
[14:44:56]
<tituspijean> > <@jose1711:matrix.org> could you please share your `md5sum`:
> ```
> md5sum /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
> eabad6e270c83aaebe7e4be87448820a /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
> ```
mmmh, corruption maybe:
```
md5sum /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
7e4a2af8d6beb462ca4f10954fd94f1a /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
```
[14:44:57]
<Jose Riha> i also wonder why i am unable to reinstall `yunohost`:
```
# apt install --reinstall yunohost
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 59 not upgraded.
3 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
E: Internal Error, No file name for yunohost:amd64
```
[14:45:04]
<Jose Riha> should be in the repo, no?
[14:45:41]
<Jose Riha> ```
# dpkg -l libuuid1
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==============-================-============-=================================
ii libuuid1:amd64 2.36.1-8+deb11u1 amd64 Universally Unique ID library
```
[14:45:56]
<Jose Riha> > <@titus:pijean.ovh> mmmh, corruption maybe:
>
> ```
> md5sum /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
> 7e4a2af8d6beb462ca4f10954fd94f1a /usr/lib/x86_64-linux-gnu/libuuid.so.1.3.0
> ```
anything is possible, though.. on VPS it's a bit strange
[16:19:12]
<luckyllama345> I've installed roundcube on my server, but it complains about smtp server when sending emails - rainloop works fine for sending, but even if I copy the config "tls://127.0.0.1:587" used there, it still complains "SMTP Error (): Connection to server failed.".
I get this in /var/log/mail.log:
```
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: connect from ip6-localhost\[::1\]
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: Anonymous TLS connection established from ip6-localhost\[::1\]: TLSv1.3 with cipher TLS\_AES\_256\_GCM\_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (3072 bits) server-digest SHA256
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: lost connection after STARTTLS from ip6-localhost\[::1\]
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: disconnect from ip6-localhost\[::1\] ehlo=1 starttls=1 commands=2
```
[16:19:37]
<luckyllama345> I've installed roundcube on my server, but it complains about smtp server when sending emails - rainloop works fine for sending, but even if I copy the config "tls://127.0.0.1:587" used there, it still complains "SMTP Error (): Connection to server failed.".
I get this in /var/log/mail.log:
```
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: connect from ip6-localhost\[::1\]
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: Anonymous TLS connection established from ip6-localhost\[::1\]: TLSv1.3 with cipher TLS\_AES\_256\_GCM\_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (3072 bits) server-digest SHA256
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: lost connection after STARTTLS from ip6-localhost\[::1\]
Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: disconnect from ip6-localhost\[::1\] ehlo=1 starttls=1 commands=2
```
(replaced my hostname from digitalocean with "hostname")
[17:06:15]
<Jose Riha> something off with `nginx`:
```
# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
Segmentation fault
```
[17:07:56]
<Salamandar> > <@jose1711:matrix.org> something off with `nginx`:
> ```
> # nginx -t
> nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
> nginx: configuration file /etc/nginx/nginx.conf test is successful
> Segmentation fault
> ```
your server has a huge problem, well beyond yunohost xD
[17:08:28]
<Jose Riha> > <@Salamandar:matrix.org> your server has a huge problem, well beyond yunohost xD
looks that way.. the question is whether a reboot is a good idea or i should investigate further
[17:08:44]
<Salamandar> > <@luckyllama345:matrix.org> I've installed roundcube on my server, but it complains about smtp server when sending emails - rainloop works fine for sending, but even if I copy the config "tls://127.0.0.1:587" used there, it still complains "SMTP Error (): Connection to server failed.".
> I get this in /var/log/mail.log:
>
> ```
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: connect from ip6-localhost\[::1\]
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: Anonymous TLS connection established from ip6-localhost\[::1\]: TLSv1.3 with cipher TLS\_AES\_256\_GCM\_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (3072 bits) server-digest SHA256
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: lost connection after STARTTLS from ip6-localhost\[::1\]
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: disconnect from ip6-localhost\[::1\] ehlo=1 starttls=1 commands=2
> ```
> (replaced my hostname from digitalocean with "hostname")
i'm wondering if a reboot will even succeed…
[17:08:58]
<Salamandar> is strace installed on your server ?
[17:09:12]
<Jose Riha> > <@Salamandar:matrix.org> is strace installed on your server ?
it is
[17:11:44]
<Salamandar> although strace is not enough… is gdb installed ? if not can you try install it ?
[17:12:03]
<Jose Riha> > <@Salamandar:matrix.org> although strace is not enough… is gdb installed ? if not can you try install it ?
gdb is installed also
[17:12:12]
<Salamandar> > <@luckyllama345:matrix.org> I've installed roundcube on my server, but it complains about smtp server when sending emails - rainloop works fine for sending, but even if I copy the config "tls://127.0.0.1:587" used there, it still complains "SMTP Error (): Connection to server failed.".
> I get this in /var/log/mail.log:
>
> ```
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: connect from ip6-localhost\[::1\]
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: Anonymous TLS connection established from ip6-localhost\[::1\]: TLSv1.3 with cipher TLS\_AES\_256\_GCM\_SHA384 (256/256 bits) key-exchange ECDHE (P-384) server-signature RSA-PSS (3072 bits) server-digest SHA256
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: lost connection after STARTTLS from ip6-localhost\[::1\]
> Feb 19 17:18:22 hostname postfix/submission/smtpd\[672884\]: disconnect from ip6-localhost\[::1\] ehlo=1 starttls=1 commands=2
> ```
> (replaced my hostname from digitalocean with "hostname")
not sure about this issue… can you try with another webmail though ? Like snappymail ?
[17:12:35]
<Salamandar> can you run `gdb --args nginx -t`
then once on the gdb prompt, `run`
[17:12:45]
<Jose Riha> ```
# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
Segmentation fault
```
[17:12:59]
<Jose Riha> sorry, i meant
```
Program received signal SIGSEGV, Segmentation fault.
0x0000000000000004 in ?? ()
(gdb) bt
#0 0x0000000000000004 in ?? ()
Backtrace stopped: Cannot access memory at address 0x800000001a25
```
[17:13:11]
<Jose Riha> not very helpful
[17:13:19]
<Jose Riha> but it does look like a memory corruption, no?
[17:13:22]
<Salamandar> nothing before the SIGSEGV line ? ><'
[17:13:42]
<Jose Riha> nah.. nothing useful
[17:13:50]
<Jose Riha> ```
(gdb) r -t
Starting program: /usr/sbin/nginx -t
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
[Detaching after vfork from child process 2128112]
[Detaching after vfork from child process 2128113]
[Detaching after vfork from child process 2128114]
nginx: configuration file /etc/nginx/nginx.conf test is successful
```
[17:14:06]
<Jose Riha> ```
# uptime
18:13:54 up 132 days, 22:15, 3 users, load average: 0.17, 0.23, 0.21
```
[17:14:14]
<Jose Riha> maybe.. i should reboot more often?
[17:14:47]
<Jose Riha> anyway.. i believe it's time to test the backups now
[17:15:01]
<Salamandar> > <@jose1711:matrix.org> maybe.. i should reboot more often?
nah that's not the issue
[17:15:12]
<Salamandar> > <@jose1711:matrix.org> anyway.. i believe it's time to test the backups now
you might want to download the backups before rebooting :|
[17:16:25]
<Jose Riha> yeah, i will take some time to think it through, check what options VPS hosting provides and.. we'll see. thank you for your time
[17:16:48]
<Jose Riha> somehow i got this impression that VPS can never get corrupted
[17:16:56]
<Jose Riha> (because virtual this, virtual that.. redundacy, bla bla)
[17:18:10]
<Salamandar> good luck :'(
[17:19:22]
<Jose Riha> thanks, will report back
[20:30:42]
<Jose Riha> made a snapshot and after reboot the errors are gone
[20:34:48]
<rathantara> glitchsoc not accessible from outside after latest upgrade