[13:41:08]
<Mateusz Szymański> > <jorgeluis> Do you guys know if Rallly is already ready for install? It's marked as level 7
LVL 6+ should be safe to use so I think yes?
[16:06:47]
<Stephanie Nadeau> ```=================================
Base system (basesystem)
=================================
[INFO] Server hardware architecture is bare-metal arm64
- Server model is Raspberry Pi 400 Rev 1.1
[INFO] Server is running Linux kernel 6.1.21-v8+
[INFO] Server is running Debian 11.9
[INFO] Server is running YunoHost 11.2.8.2 (stable)
- yunohost version: 11.2.8.2 (stable)
- yunohost-admin version: 11.2.3 (stable)
- moulinette version: 11.2 (stable)
- ssowat version: 11.2 (stable)
=================================
Internet connectivity (ip)
=================================
[SUCCESS] Domain name resolution is working!
[SUCCESS] The server is connected to the Internet through IPv4!
- Global IP: xx.xx.xx.xx
- Local IP: 192.168.0.31
[WARNING] The server does not have working IPv6.
- IPv6 should usually be automatically configured by the system or your provider if it's available. Otherwise, you might need to configure a few things manually as explained in the documentation here: https://yunohost.org/#/ipv6.
=================================
DNS records (dnsrecords)
=================================
[SUCCESS] DNS records are correctly configured for domain maindomain.tld (category basic)
[SUCCESS] DNS records are correctly configured for domain maindomain.tld (category extra)
[SUCCESS] Your domains are registered and not going to expire anytime soon.
- maindomain.tld expires in 357 days.
=================================
Ports exposure (ports)
=================================
[SUCCESS] Port 22 is reachable from the outside.
- Exposing this port is needed for admin features (service ssh)
[ERROR] Port 25 is not reachable from the outside.
- Exposing this port is needed for email features (service postfix)
- To fix this issue, you most probably need to configure port forwarding on your internet router as described in https://yunohost.org/isp_box_config
[SUCCESS] Port 80 is reachable from the outside.
- Exposing this port is needed for web features (service nginx)
[SUCCESS] Port 443 is reachable from the outside.
- Exposing this port is needed for web features (service nginx)
[SUCCESS] Port 587 is reachable from the outside.
- Exposing this port is needed for email features (service postfix)
[SUCCESS] Port 993 is reachable from the outside.
- Exposing this port is needed for email features (service dovecot)
=================================
Web (web)
=================================
[SUCCESS] Domain maindomain.tld is reachable through HTTP from outside the local network.
[WARNING] Your local network does not seem to have hairpinning enabled.
- This is probably because of your ISP box / router. As a result, people from outside your local network will be able to access your server as expected, but not people from inside the local network (like you, probably?) when using the domain name or global IP. You may be able to improve the situation by having a look at https://yunohost.org/dns_local_network
=================================
Email (mail)
=================================
[ERROR] The SMTP mail server cannot send emails to other servers because outgoing port 25 is blocked in IPv4.
- You should first try to unblock outgoing port 25 in your internet router interface or your hosting provider interface. (Some hosting providers may require you to send them a support ticket for this).
- Some providers won't let you unblock outgoing port 25 because they don't care about Net Neutrality.
- Some of them provide the alternative of using a mail server relay though it implies that the relay will be able to spy on your email traffic.
- A privacy-friendly alternative is to use a VPN *with a dedicated public IP* to bypass these kinds of limits. See https://yunohost.org/#/vpn_advantage
- You can also consider switching to a more net neutrality-friendly provider
[ERROR] The SMTP mail server is unreachable from the outside on IPv4. It won't be able to receive emails.
- Could not open a connection on port 25 to your server in IPv4. It appears to be unreachable.
1. The most common cause for this issue is that port 25 is not correctly forwarded to your server.
2. You should also make sure that service postfix is running.
3. On more complex setups: make sure that no firewall or reverse-proxy is interfering.
[ERROR] Reverse DNS is not correctly configured for IPv4. Some emails may fail to get delivered or be flagged as spam.
- Current reverse DNS: modemcable197.58-163-184.mc.videotron.ca
Expected value: maindomain.tld
- You should first try to configure reverse DNS with maindomain.tld in your internet router interface or your hosting provider interface. (Some hosting providers may require you to send them a support ticket for this).
- Some providers won't let you configure your reverse DNS (or their feature might be broken...). If you are experiencing issues because of this, consider the following solutions:
- Some ISP provide the alternative of using a mail server relay though it implies that the relay will be able to spy on your email traffic.
- A privacy-friendly alternative is to use a VPN *with a dedicated public IP* to bypass this kind of limits. See https://yunohost.org/#/vpn_advantage
- Or it's possible to switch to a different provider
[SUCCESS] The IPs and domains used by this server do not appear to be blacklisted
[SUCCESS] 0 pending emails in the mail queues
=================================
Services status check (services)
=================================
[SUCCESS] Service dnsmasq is running!
[SUCCESS] Service dovecot is running!
[SUCCESS] Service fail2ban is running!
[SUCCESS] Service mysql is running!
[SUCCESS] Service nginx is running!
[SUCCESS] Service php7.4-fpm is running!
[SUCCESS] Service postfix is running!
[SUCCESS] Service redis-server is running!
[SUCCESS] Service rspamd is running!
[SUCCESS] Service slapd is running!
[SUCCESS] Service ssh is running!
[SUCCESS] Service yunohost-api is running!
[SUCCESS] Service yunohost-firewall is running!
[SUCCESS] Service yunomdns is running!
=================================
System resources (systemresources)
=================================
[SUCCESS] The system still has 3.3 GiB (88%) RAM available out of 3.7 GiB.
[INFO] The system has only 100 MiB swap. You should consider having at least 512 MiB to avoid situations where the system runs out of memory.
- Please be careful and aware that if the server is hosting swap on an SD card or SSD storage, it may drastically reduce the life expectancy of the device.
[SUCCESS] Storage / (on device /dev/root) still has 344 GiB (99.4%) space left (out of 346 GiB)!
[SUCCESS] Storage /boot (on device /dev/mmcblk0p1) still has 224 MiB (88%) space left (out of 255 MiB)!
=================================
System configurations (regenconf)
=================================
[SUCCESS] All configuration files are in line with the recommended configuration!
=================================
Applications (apps)
=================================
[SUCCESS] All installed apps respect basic packaging practices```
[16:08:54]
<Stephanie Nadeau> Here are the logs. I don't know the email server, so those warnings are ignored. In short, I can't access it through the web address.
[16:09:04]
<Stephanie Nadeau> *don't need the email server
[18:26:44]
<isAAAc> furyventura: wich php version is pointed in your nextcloud nginx vhost ?
[18:28:21]
<isAAAc> ```
root@krashboyz:~# grep -i fastcgi_pass /etc/nginx/conf.d/krashboyz.org.d/nextcloud.conf
fastcgi_pass unix:/var/run/php/php8.2-fpm-nextcloud.sock;
```
-> 8.2
[18:31:05]
<isAAAc> https://docs.nextcloud.com/server/latest/admin_manual/release_notes/upgrade_to_26.html
`PHP 7.4 is no longer supported.` , so since 2 major version ago ;)
[18:45:22]
<furyventura> isAAAc: let me check. On debian I have php 7.4.33. I wonder why yunohost is updating to nextcloud 28 without updating also the php version
[18:46:58]
<furyventura> hmm, shows "fastcgi_pass unix:/var/run/php/php8.2-fpm-nextcloud.sock;"
[18:48:36]
<furyventura> but why do I get in the web UI this error message after trying to activate the maintenance mode?
[18:48:36]
<furyventura> https://paste.yunohost.org/raw/erenorataq
[18:57:13]
<furyventura> seems I have manually change the version of nextcloud to 7.4. Mamie is helping me in a forum entry https://forum.yunohost.org/t/nextcloud-still-using-php-7-4-instead-of-php-8-0/28666
[18:57:47]
<furyventura> but I wonder why your command points to 8.2. This goes beyond my knowledge 😅
[19:59:51]
<icefishi> https://aria.im/_matrix/media/v1/download/matrix.org/wHaJuYpGtAbghbOgAQGrzgoG
[19:59:52]
<icefishi> hii, quck question, i´m using cloudflare for my dns records and ive run into a small problem with the records
[20:06:36]
<Tag> > <@icefishi:matrix.org> hii, quck question, i´m using cloudflare for my dns records and ive run into a small problem with the records
just click ignore on this one
[20:08:19]
<icefishi> > <@tag:lostpod.me> just click ignore on this one
thx