[08:36:59]
<phinero> Guys, could you recommend me a dashboard ( as yunoapp, except Webmin) to control the server that does not spoil anything in YunoHost?
[09:35:12]
<tituspijean> phinero What about YunoHost's own webadmin? 😛 More seriously, what features are you looking for?
[09:55:02]
<Orel36> i am not able to create the domain, once validated Yuno bring me back to the first page
[09:55:10]
<Orel36> someone has an idea ?
[10:04:15]
<Orel36> message me you already subscribed to dyndns
[10:04:28]
<Orel36> i dont know how to pass this
[10:11:57]
<c014> Me neither
[10:27:01]
<phinero> > phinero What about YunoHost's own webadmin? 😛 More seriously, what features are you looking for?
I meant Disk usage, CPU usage, HW info and etc. Of course, I can manage it using SSH (htop and so one) but....
[10:27:16]
<Guillaume Bouzige> > <@phinero:matrix.org> > phinero What about YunoHost's own webadmin? 😛 More seriously, what features are you looking for?
>
> I meant Disk usage, CPU usage, HW info and etc. Of course, I can manage it using SSH (htop and so one) but....
try netdata
[10:35:21]
<phinero> > try netdata
Hm...Not bad ) Thank you. I'll follow your advice 👍️😀
And what can you say about **rportd**? Do you have any experience?
[10:36:30]
<Guillaume Bouzige> > <@phinero:matrix.org> > try netdata
>
> Hm...Not bad ) Thank you. I'll follow your advice 👍️😀
> And what can you say about **rportd**? Do you have any experience?
netdata can greatly improve observability if that's what you after...no idea about rportd
[10:37:24]
<Guillaume Bouzige> it all depends what you are trying to achieve, in __specific__
[10:53:22]
<buck92> I had a failed install for hedgedoc on a raspberry pi 4b. It suggested using yunopaste and putting the results in here. I've been using Yunohost less than a full day. Real new at this. Thanks for any advice.
[10:53:24]
<buck92> https://paste.yunohost.org/raw/koxigekoxe
[10:58:30]
<tituspijean> buck92: welcome! It seems there is a network issue while the app is being downloaded: `There appears to be trouble with your network connection. Retrying...`
Is this your first attempt or is it occurring whenever you try?
[11:55:10]
<buck92> First attempt.
[11:55:37]
<buck92> I'll need to give it another run or two then just to see if my network is dropping or something. Thanks for the quick advice!
[11:58:07]
<tituspijean> 🤞
[13:30:16]
<kirkrehn83> looking to recover my old noho.st ddns domain
[19:12:32]
<mavric34[m]> ericg[m]: Hello, I showed the port of stash on yunohost to the developers, and one of them told me that the default configuration was not safe because of this parameter :
https://github.com/YunoHost-Apps/stash_ynh/blob/master/conf/config.yml#L3
[19:12:41]
<mavric34[m]> I explained to him that by default all stash permissions were validated, and then yunohost adds its own layer of permissions on top!
Here is the whole conversation:
[20:37:02]
<tdlf32[m]> Does anyone know a tool for automatic backup and synchronization of GIT repositories?
I want to create a local mirror of several GIT repositories that can automatically synchronize with new updates on the official repositories. Which tool should I use for that?
[20:37:57]
<hueso> gitea does that
[20:38:54]
<tdlf32[m]> > <@_bifrost_hueso2fsupport40conferenceyunohostorg[m]:libera.chat> gitea does that
How do I configure it for this?
Does GITLAB also allow me to do this?
[20:54:03]
<tituspijean> tdlf32[m]: you can read https://docs.gitea.io/en-us/repo-mirror/
[20:57:59]
<tdlf32[m]> > <@titus[m]:libera.chat> tdlf32[m]: you can read https://docs.gitea.io/en-us/repo-mirror/
Thanks for the link :)
[21:12:55]
<Nabla> Hi,
[21:12:56]
<Nabla> J'ai honte, mais je vais devoir demander de l'aide.
[21:12:56]
<Nabla> Suite à la dernière publication, j'ai fait la mise à niveau (parfait comme toujours).
[21:12:57]
<Nabla> Et ... Vous l'avez deviné ... J'ai perdu mon accès X-P
[21:12:57]
<Nabla> Ensuite, j'ai lu un peu (nouveautés, conseils, ...) et j'ai passé mon accès WebAdmin en restreint avec mes IP locales et mon IP publique.
[21:12:58]
<Nabla> OK pour le SSH, pas de souci d'accès.
[21:12:58]
<Nabla> (Pour une fois, je n'avais pas laissé un autre PC de connecté en sécu)
[21:12:58]
<Nabla> Et je sais faire des trucs en lignes de commandes.
[21:12:59]
<Nabla> Merci,
[21:12:59]
<Nabla> Quelqu'un aurait cette procédure ?
[21:12:59]
<Nabla> Mais je ne trouve pas la procédure pour réactiver l'accès complet à WebAdmin.
[21:15:22]
<Aleks (he/him/il/lui)> `yunohost settings --help`
[21:16:00]
<Aleks (he/him/il/lui)> sans doute `yunohost settings list` pour trouver le nom technique du setting, puis `yunohost settings set nom.du.setting -v ''` pour remettre le setting à chaine vide
[21:20:19]
<Nabla> security.webadmin.webadmin_allowlist:
[21:20:20]
<Nabla> value: XXXXX,192.168.0.YY,192.168.0.ZZ
[21:20:20]
<Nabla> ask: Liste des IP autorisées pour l'administration Web
[21:20:21]
<Nabla> ask: Activer la liste des IP autorisées pour l'administration Web
[21:20:21]
<Nabla> security.webadmin.webadmin_allowlist_enabled:
[21:20:21]
<Nabla> value: yes
[21:20:43]
<Nabla> Bien vu pour
[21:20:44]
<Nabla> sudo yunohost settings list
[21:21:09]
<Nabla> je vais chercher comme passer value: yes à value: no
[21:21:55]
<Aleks (he/him/il/lui)> `yunohost settings set nom.du.setting -v 'no'`
[21:22:33]
<Nabla> j'ai tenté mais erreur
[21:23:04]
<Nabla> ha non, l'erreur, c'st moi
[21:23:12]
<Nabla> erreur de frappe
[21:24:32]
<Nabla> Succès ! La configuration a été mise à jour pour 'nginx'
[21:24:32]
<Nabla> sudo yunohost settings set security.webadmin.webadmin_allowlist_enabled -v 'no'
[21:24:32]
<Nabla> Info : Saving the new configuration...
[21:24:33]
<Nabla> Succès ! Config updated as expected
[21:24:34]
<Nabla> (y)
[21:26:02]
<Nabla> Un énorme merci Aleks
[21:49:14]
<dasta31> hi, the migration tool for yunohost from 4.x --> 11.x doesn't work; it says i've already completed the migration (i haven't it says at the bottom of the webpage v4.4.3 (stable))
[22:00:01]
<Nabla> Mine is "YunoHost 11.1.6.2 (stable)" at the bottom of the WebPage.
[22:00:02]
<Nabla> I'm not good enough but I think that the gap is very important between 4.x and 11.x.
[22:00:03]
<Nabla> I recommand cloning your entire system/data (HDD ?).
[22:00:03]
<Nabla> (and sorry for my bad English)
[22:01:13]
<Aleks (he/him/il/lui)> dasta31: we can't help you if you don't provide full context of what happened on your machine
[22:01:32]
<Aleks (he/him/il/lui)> it doesn't magically say that you've already completed the migration straight out of the box
[22:56:35]
<cat> yunohost cool and good
[22:58:07]
<edendestroyer> cool and good
[23:01:30]
<cat> So true.